mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
160 lines
7.1 KiB
Plaintext
160 lines
7.1 KiB
Plaintext
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-STABLE amd64] (local build)
|
|
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Model Family: SAMSUNG SpinPoint M6
|
|
Device Model: SAMSUNG HM320JI
|
|
Serial Number: --
|
|
LU WWN Device Id: 5 0f0000 ...
|
|
Firmware Version: 2SS00_01
|
|
User Capacity: 320,072,933,376 bytes [320 GB]
|
|
Sector Size: 512 bytes logical/physical
|
|
Device is: In smartctl database 7.3/5528
|
|
ATA Version is: ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 0
|
|
SATA Version is: SATA 2.5, 1.5 Gb/s
|
|
Local Time is: Sun May 12 20:52:52 2024 -04
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
AAM level is: 254 (maximum performance), recommended: 254
|
|
APM level is: 254 (maximum performance)
|
|
Rd look-ahead is: Enabled
|
|
Write cache is: Enabled
|
|
DSN feature is: Unavailable
|
|
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
|
Wt Cache Reorder: Unknown
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART Status not supported: Incomplete response, ATA output registers missing
|
|
SMART overall-health self-assessment test result: PASSED
|
|
Warning: This result is based on an Attribute check.
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x00) Offline data collection activity
|
|
was never started.
|
|
Auto Offline Data Collection: Disabled.
|
|
Self-test execution status: ( 32) The self-test routine was interrupted
|
|
by the host with a hard or soft reset.
|
|
Total time to complete Offline
|
|
data collection: ( 121) seconds.
|
|
Offline data collection
|
|
capabilities: (0x5b) SMART execute Offline immediate.
|
|
Auto Offline data collection on/off support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
Offline surface scan supported.
|
|
Self-test supported.
|
|
No Conveyance Self-test supported.
|
|
Selective Self-test supported.
|
|
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
General Purpose Logging supported.
|
|
Short self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 121) minutes.
|
|
SCT capabilities: (0x003f) SCT Status supported.
|
|
SCT Error Recovery Control supported.
|
|
SCT Feature Control supported.
|
|
SCT Data Table supported.
|
|
|
|
SMART Attributes Data Structure revision number: 16
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|
1 Raw_Read_Error_Rate POSR-- 100 100 051 - 2489
|
|
3 Spin_Up_Time POS--- 252 252 025 - 2625
|
|
4 Start_Stop_Count -O--CK 078 078 000 - 22563
|
|
5 Reallocated_Sector_Ct PO--CK 045 045 010 - 517
|
|
7 Seek_Error_Rate POSR-- 252 252 051 - 0
|
|
8 Seek_Time_Performance --S--K 252 252 015 - 0
|
|
9 Power_On_Hours -O--CK 062 062 000 - 19221
|
|
10 Spin_Retry_Count -O--CK 100 100 051 - 1
|
|
12 Power_Cycle_Count -O--CK 093 093 000 - 7759
|
|
191 G-Sense_Error_Rate -O--CK 002 002 000 - 999999
|
|
192 Power-Off_Retract_Count -O--CK 100 100 000 - 2899
|
|
194 Temperature_Celsius -O---K 130 052 000 - 36 (Min/Max 9/62)
|
|
195 Hardware_ECC_Recovered -O-RC- 100 001 000 - 18141
|
|
196 Reallocated_Event_Count -O--CK 252 252 000 - 0
|
|
197 Current_Pending_Sector -O--C- 089 089 000 - 103
|
|
198 Offline_Uncorrectable ----CK 252 252 000 - 0
|
|
199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 106
|
|
200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 73
|
|
201 Soft_Read_Error_Rate -O--CK 252 252 000 - 0
|
|
223 Load_Retry_Count -O--CK 100 100 000 - 893
|
|
225 Load_Cycle_Count -O--CK 086 086 000 - 145466
|
|
||||||_ K auto-keep
|
|
|||||__ C event count
|
|
||||___ R error rate
|
|
|||____ S speed/performance
|
|
||_____ O updated online
|
|
|______ P prefailure warning
|
|
|
|
ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: scsi error unsupported scsi opcode
|
|
Read GP Log Directory failed
|
|
|
|
SMART Log Directory Version 1 [multi-sector log support]
|
|
Address Access R/W Size Description
|
|
0x00 SL R/O 1 Log Directory
|
|
0x01 SL R/O 1 Summary SMART error log
|
|
0x02 SL R/O 2 Comprehensive SMART error log
|
|
0x06 SL R/O 1 SMART self-test log
|
|
0x08 SL R/O 1 Power Conditions log
|
|
0x80-0x9f SL R/W 16 Host vendor specific log
|
|
0xe0 SL R/W 1 SCT Command/Status
|
|
0xe1 SL R/W 1 SCT Data Transfer
|
|
|
|
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
|
|
|
|
SMART Error Log Version: 1
|
|
No Errors Logged
|
|
|
|
SMART Extended Self-test Log (GP Log 0x07) not supported
|
|
|
|
SMART Self-test log structure revision number 1
|
|
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|
# 1 Short offline Completed without error 00% 16652 -
|
|
# 2 Short offline Aborted by host 150% 16029 -
|
|
# 3 Short offline Completed without error 00% 8583 -
|
|
# 4 Short offline Aborted by host 150% 8018 -
|
|
# 5 Short offline Aborted by host 150% 6224 -
|
|
# 6 Short offline Completed without error 00% 337 -
|
|
|
|
SMART Selective self-test log data structure revision number 0
|
|
Note: revision number not 1 implies that no selective self-test has ever been run
|
|
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|
1 0 0 Interrupted [00% left] (0-65535)
|
|
2 0 0 Not_testing
|
|
3 0 0 Not_testing
|
|
4 0 0 Not_testing
|
|
5 0 0 Not_testing
|
|
Selective self-test flags (0x0):
|
|
After scanning selected spans, do NOT read-scan remainder of disk.
|
|
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|
|
|
SCT Status Version: 2
|
|
SCT Version (vendor specific): 256 (0x0100)
|
|
Device State: Active (0)
|
|
Current Temperature: 36 Celsius
|
|
Power Cycle Min/Max Temperature: 21/36 Celsius
|
|
Lifetime Min/Max Temperature: 10/62 Celsius
|
|
Under/Over Temperature Limit Count: 0/0
|
|
|
|
SCT Temperature History Version: 2
|
|
Temperature Sampling Period: 1 minute
|
|
Temperature Logging Interval: 1 minute
|
|
Min/Max recommended Temperature: 15/55 Celsius
|
|
Min/Max Temperature Limit: 10/60 Celsius
|
|
Temperature History Size (Index): 128 (13)
|
|
|
|
SMART WRITE LOG does not return COUNT and LBA_LOW register
|
|
SCT (Get) Error Recovery Control command failed
|
|
|
|
Device Statistics (GP/SMART Log 0x04) not supported
|
|
|
|
Pending Defects log (GP Log 0x0c) not supported
|
|
|
|
ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: scsi error unsupported scsi opcode
|
|
Read SATA Phy Event Counters failed
|
|
|