80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Samsung/HM500/HM500LI/AE5BB85BC160
Andrey Ponomarenko 2a811b67c1 Update of reports (new: 6895, modified: 16)
2025-01-05 01:57:11 +03:00

283 lines
14 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-RELEASE-p5 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint M6
Device Model: SAMSUNG HM500LI
Serial Number: --
LU WWN Device Id: 5 0f0000 ...
Firmware Version: 2TF00_00
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database 7.2/5319
ATA Version is: ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 0
SATA Version is: SATA 2.5, 3.0 Gb/s
Local Time is: Fri Mar 22 10:21:24 2024 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM level is: 0 (vendor specific), recommended: 254
APM level is: 1 (minimum power consumption with standby)
Rd look-ahead is: Enabled
Write cache is: Disabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 169) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 169) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 100 100 051 - 0
3 Spin_Up_Time POS--- 252 252 025 - 3500
4 Start_Stop_Count -O--CK 061 061 000 - 39458
5 Reallocated_Sector_Ct PO--CK 066 066 010 - 323
7 Seek_Error_Rate -OSR-- 252 252 051 - 0
8 Seek_Time_Performance --S--K 252 252 015 - 0
9 Power_On_Hours -O--CK 032 032 000 - 34841
10 Spin_Retry_Count -O--CK 100 100 051 - 6
12 Power_Cycle_Count -O--CK 100 100 000 - 510
191 G-Sense_Error_Rate -O--CK 100 100 000 - 724
192 Power-Off_Retract_Count -O--CK 252 252 000 - 0
194 Temperature_Celsius -O---K 163 055 000 - 25 (Min/Max 14/61)
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 0
196 Reallocated_Event_Count -O--CK 252 252 000 - 0
197 Current_Pending_Sector -O--C- 252 252 000 - 0
198 Offline_Uncorrectable ----CK 252 252 000 - 0
199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0
200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0
201 Soft_Read_Error_Rate -O--CK 252 252 000 - 0
223 Load_Retry_Count -O--CK 100 100 000 - 35
225 Load_Cycle_Count -O--CK 013 013 000 - 881381
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 2 Comprehensive SMART error log
0x03 GPL R/O 2 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x08 SL R/O 1 Power Conditions log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80 GPL,SL R/W 16 Host vendor specific log
0x81-0x9f SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
Device Error Count: 5
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 5 [4] occurred at disk power-on lifetime: 18615 hours (775 days + 15 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 08 00 00 13 fa b1 05 40 00 Error: ICRC, ABRT at LBA = 0x13fab105 = 335196421
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 08 00 00 13 fa b1 05 40 00 00:04:02.875 READ FPDMA QUEUED
60 01 00 00 00 00 00 13 fa b0 05 40 00 00:04:02.875 READ FPDMA QUEUED
ef 00 05 00 80 00 00 00 00 00 00 40 00 00:04:02.750 SET FEATURES [Enable APM]
60 01 00 00 08 00 00 13 fa af 04 40 00 00:04:02.750 READ FPDMA QUEUED
60 01 00 00 00 00 00 13 fa ae 04 40 00 00:04:02.750 READ FPDMA QUEUED
Error 4 [3] occurred at disk power-on lifetime: 24419 hours (1017 days + 11 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 01 00 00 00 30 d6 a1 4b 40 00 Error: ABRT at LBA = 0x30d6a14b = 819372363
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 05 01 00 00 00 30 d6 a1 4b 40 00 1d+08:30:07.312 WRITE FPDMA QUEUED
60 00 80 00 08 00 00 00 1a 7a 00 40 00 1d+08:30:07.312 READ FPDMA QUEUED
61 00 04 01 00 00 00 30 d6 a1 47 40 00 1d+08:30:07.250 WRITE FPDMA QUEUED
60 00 80 02 08 00 00 00 1a 79 80 40 00 1d+08:30:07.250 READ FPDMA QUEUED
60 00 02 00 10 00 00 2d 35 c0 69 40 00 1d+08:30:07.250 READ FPDMA QUEUED
Error 3 [2] occurred at disk power-on lifetime: 24410 hours (1017 days + 2 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 03 10 00 00 2d 1f ac fa 40 00 Error: ABRT at LBA = 0x2d1facfa = 757050618
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 02 03 10 00 00 2d 1f ac fa 40 00 23:45:23.375 READ FPDMA QUEUED
60 00 02 00 18 00 00 38 82 0b 8c 40 00 23:45:23.375 READ FPDMA QUEUED
60 00 02 06 00 00 00 30 e1 79 1b 40 00 23:45:23.375 READ FPDMA QUEUED
60 00 02 03 30 00 00 30 97 68 ee 40 00 23:45:23.375 READ FPDMA QUEUED
60 00 02 06 18 00 00 2d 4c fe 57 40 00 23:45:23.375 READ FPDMA QUEUED
Error 2 [1] occurred at disk power-on lifetime: 18615 hours (775 days + 15 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 08 00 00 13 fa b7 fb 40 00 Error: ICRC, ABRT at LBA = 0x13fab7fb = 335198203
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 08 00 00 13 fa b7 fb 40 00 00:04:10.062 READ FPDMA QUEUED
60 01 00 00 00 00 00 13 fa b6 fb 40 00 00:04:10.062 READ FPDMA QUEUED
ef 00 42 00 00 00 00 00 00 00 00 40 00 00:04:09.937 SET FEATURES [Enable AAM] [OBS-ACS-2]
60 01 00 00 08 00 00 13 fa b5 fa 40 00 00:04:09.937 READ FPDMA QUEUED
60 01 00 00 00 00 00 13 fa b4 fa 40 00 00:04:09.937 READ FPDMA QUEUED
Error 1 [0] occurred at disk power-on lifetime: 18615 hours (775 days + 15 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 08 00 00 13 fa b1 05 40 00 Error: ICRC, ABRT at LBA = 0x13fab105 = 335196421
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 08 00 00 13 fa b1 05 40 00 00:04:02.875 READ FPDMA QUEUED
60 01 00 00 00 00 00 13 fa b0 05 40 00 00:04:02.875 READ FPDMA QUEUED
ef 00 05 00 80 00 00 00 00 00 00 40 00 00:04:02.750 SET FEATURES [Enable APM]
60 01 00 00 08 00 00 13 fa af 04 40 00 00:04:02.750 READ FPDMA QUEUED
60 01 00 00 00 00 00 13 fa ae 04 40 00 00:04:02.750 READ FPDMA QUEUED
SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 34829 -
# 2 Short offline Completed without error 00% 34799 -
# 3 Short offline Completed without error 00% 34776 -
# 4 Short offline Completed without error 00% 34740 -
# 5 Short offline Completed without error 00% 34661 -
# 6 Short offline Completed without error 00% 34638 -
# 7 Short offline Completed without error 00% 34610 -
# 8 Short offline Completed without error 00% 34539 -
# 9 Short offline Completed without error 00% 34525 -
#10 Short offline Completed without error 00% 34510 -
#11 Short offline Completed without error 00% 34494 -
#12 Short offline Completed without error 00% 34386 -
#13 Short offline Completed without error 00% 34223 -
#14 Short offline Completed without error 00% 34203 -
#15 Short offline Completed without error 00% 34185 -
#16 Short offline Completed without error 00% 33760 -
#17 Extended offline Completed without error 00% 33698 -
#18 Short offline Completed without error 00% 33072 -
#19 Short offline Completed without error 00% 33055 -
#20 Short offline Completed without error 00% 33015 -
#21 Short offline Completed without error 00% 33002 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed [00% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 256 (0x0100)
Device State: Active (0)
Current Temperature: 25 Celsius
Power Cycle Min/Max Temperature: 22/26 Celsius
Lifetime Min/Max Temperature: 15/58 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 15/55 Celsius
Min/Max Temperature Limit: 10/60 Celsius
Temperature History Size (Index): 128 (111)
SCT Error Recovery Control:
Read: 1 (0.1 seconds)
Write: 1 (0.1 seconds)
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x8001 2 0 Vendor specific
View Git Blame Copy Permalink