mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
213 lines
9.1 KiB
Plaintext
213 lines
9.1 KiB
Plaintext
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p3 amd64] (local build)
|
|
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Model Family: SAMSUNG SpinPoint P80
|
|
Device Model: SAMSUNG SP0812C
|
|
Serial Number: --
|
|
Firmware Version: SU100-30
|
|
User Capacity: 80,060,424,192 bytes [80.0 GB]
|
|
Sector Size: 512 bytes logical/physical
|
|
Device is: In smartctl database 7.3/5528
|
|
ATA Version is: ATA/ATAPI-7 T13/1532D revision 0
|
|
Local Time is: Sun Sep 15 10:14:09 2024 ACST
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
AAM level is: 254 (maximum performance), recommended: 254
|
|
APM feature is: Unavailable
|
|
Rd look-ahead is: Enabled
|
|
Write cache is: Enabled
|
|
DSN feature is: Unavailable
|
|
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
|
Wt Cache Reorder: Unavailable
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART overall-health self-assessment test result: PASSED
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x00) Offline data collection activity
|
|
was never started.
|
|
Auto Offline Data Collection: Disabled.
|
|
Self-test execution status: ( 0) The previous self-test routine completed
|
|
without error or no self-test has ever
|
|
been run.
|
|
Total time to complete Offline
|
|
data collection: ( 3000) seconds.
|
|
Offline data collection
|
|
capabilities: (0x1b) SMART execute Offline immediate.
|
|
Auto Offline data collection on/off support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
Offline surface scan supported.
|
|
Self-test supported.
|
|
No Conveyance Self-test supported.
|
|
No Selective Self-test supported.
|
|
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
No General Purpose Logging support.
|
|
Short self-test routine
|
|
recommended polling time: ( 1) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 50) minutes.
|
|
|
|
SMART Attributes Data Structure revision number: 16
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|
1 Raw_Read_Error_Rate POSR-- 100 100 051 - 0
|
|
3 Spin_Up_Time POS--- 100 100 025 - 4160
|
|
4 Start_Stop_Count -O--CK 080 080 000 - 21124
|
|
5 Reallocated_Sector_Ct PO--CK 100 100 011 - 0
|
|
7 Seek_Error_Rate POSR-- 100 100 051 - 0
|
|
8 Seek_Time_Performance P-S--K 100 100 015 - 0
|
|
9 Power_On_Half_Minutes -O--CK 097 097 000 - 18534h+36m
|
|
10 Spin_Retry_Count PO--CK 100 100 051 - 2
|
|
11 Calibration_Retry_Count -O--C- 100 100 000 - 0
|
|
12 Power_Cycle_Count -O--CK 090 090 000 - 10632
|
|
194 Temperature_Celsius -O---K 193 079 000 - 15
|
|
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 207857
|
|
196 Reallocated_Event_Count -O--CK 098 098 000 - 6
|
|
197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
|
198 Total_Offl_Uncorrectabl ----CK 098 098 000 - 6
|
|
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 1
|
|
200 Multi_Zone_Error_Rate -O-R-- 100 100 051 - 0
|
|
201 Soft_Read_Error_Rate -O-R-- 100 100 051 - 0
|
|
||||||_ K auto-keep
|
|
|||||__ C event count
|
|
||||___ R error rate
|
|
|||____ S speed/performance
|
|
||_____ O updated online
|
|
|______ P prefailure warning
|
|
|
|
General Purpose Log Directory not supported
|
|
|
|
SMART Log Directory Version 1 [multi-sector log support]
|
|
Address Access R/W Size Description
|
|
0x00 SL R/O 1 Log Directory
|
|
0x01 SL R/O 1 Summary SMART error log
|
|
0x02 SL R/O 2 Comprehensive SMART error log
|
|
0x06 SL R/O 2 SMART self-test log
|
|
0x80-0x9f SL R/W 16 Host vendor specific log
|
|
|
|
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
|
|
|
|
SMART Error Log Version: 1
|
|
ATA Error Count: 87 (device log contains only the most recent five errors)
|
|
CR = Command Register [HEX]
|
|
FR = Features Register [HEX]
|
|
SC = Sector Count Register [HEX]
|
|
SN = Sector Number Register [HEX]
|
|
CL = Cylinder Low Register [HEX]
|
|
CH = Cylinder High Register [HEX]
|
|
DH = Device/Head Register [HEX]
|
|
DC = Device Command Register [HEX]
|
|
ER = Error register [HEX]
|
|
ST = Status register [HEX]
|
|
Powered_Up_Time is measured from power on, and printed as
|
|
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
|
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
|
|
|
Error 87 occurred at disk power-on lifetime: 18482 hours (770 days + 2 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER ST SC SN CL CH DH
|
|
-- -- -- -- -- -- --
|
|
84 51 00 08 4c c4 e5 Error: ICRC, ABRT at LBA = 0x05c44c08 = 96750600
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|
-- -- -- -- -- -- -- -- ---------------- --------------------
|
|
c8 00 00 08 4c c4 e5 00 00:00:43.938 READ DMA
|
|
c8 00 20 20 a9 a3 e7 00 00:00:43.938 READ DMA
|
|
c8 00 30 e0 c8 0c e8 00 00:00:43.938 READ DMA
|
|
c8 00 08 78 1f 91 e5 00 00:00:43.938 READ DMA
|
|
c8 00 c0 20 c8 0c e8 00 00:00:43.938 READ DMA
|
|
|
|
Error 86 occurred at disk power-on lifetime: 18478 hours (769 days + 22 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER ST SC SN CL CH DH
|
|
-- -- -- -- -- -- --
|
|
84 51 c0 00 1d 80 e3 Error: ICRC, ABRT 192 sectors at LBA = 0x03801d00 = 58727680
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|
-- -- -- -- -- -- -- -- ---------------- --------------------
|
|
c8 00 c0 00 1d 80 e3 00 00:10:23.313 READ DMA
|
|
c8 00 08 20 16 04 e9 00 00:10:23.313 READ DMA
|
|
c8 00 e8 18 13 80 e3 00 00:10:23.313 READ DMA
|
|
c8 00 10 08 13 80 e3 00 00:10:23.313 READ DMA
|
|
c8 00 08 f8 15 04 e9 00 00:10:23.313 READ DMA
|
|
|
|
Error 85 occurred at disk power-on lifetime: 18462 hours (769 days + 6 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER ST SC SN CL CH DH
|
|
-- -- -- -- -- -- --
|
|
04 51 fe 00 00 00 40 Error: ABRT
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|
-- -- -- -- -- -- -- -- ---------------- --------------------
|
|
ef 05 fe 00 00 00 40 00 00:00:53.000 SET FEATURES [Enable APM]
|
|
c8 00 90 a8 c1 4d e2 00 00:00:53.000 READ DMA
|
|
c8 00 08 18 3e 04 e1 00 00:00:53.000 READ DMA
|
|
c8 00 f8 d0 1f 4e e2 00 00:00:53.000 READ DMA
|
|
c8 00 d8 50 96 4d e2 00 00:00:52.938 READ DMA
|
|
|
|
Error 84 occurred at disk power-on lifetime: 18462 hours (769 days + 6 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER ST SC SN CL CH DH
|
|
-- -- -- -- -- -- --
|
|
04 51 fe 00 00 00 40 Error: ABRT
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|
-- -- -- -- -- -- -- -- ---------------- --------------------
|
|
ef 05 fe 00 00 00 40 00 00:08:43.188 SET FEATURES [Enable APM]
|
|
c8 00 88 d0 bb 4d e2 00 00:08:43.188 READ DMA
|
|
c8 00 10 50 63 04 e8 00 00:08:43.125 READ DMA
|
|
c8 00 00 48 b3 57 e6 00 00:08:43.125 READ DMA
|
|
c8 00 08 18 3e 04 e1 00 00:08:43.125 READ DMA
|
|
|
|
Error 83 occurred at disk power-on lifetime: 18462 hours (769 days + 6 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER ST SC SN CL CH DH
|
|
-- -- -- -- -- -- --
|
|
04 51 fe 00 00 00 40 Error: ABRT
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|
-- -- -- -- -- -- -- -- ---------------- --------------------
|
|
ef 05 fe 00 00 00 40 00 00:04:15.375 SET FEATURES [Enable APM]
|
|
c8 00 00 e0 b9 4d e2 00 00:04:15.375 READ DMA
|
|
c8 00 08 18 3e 04 e1 00 00:04:15.313 READ DMA
|
|
c8 00 10 50 63 04 e8 00 00:04:15.313 READ DMA
|
|
c8 00 00 30 47 5b e6 00 00:04:15.313 READ DMA
|
|
|
|
SMART Extended Self-test Log (GP Log 0x07) not supported
|
|
|
|
SMART Self-test log structure revision number 1
|
|
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|
# 1 Short offline Completed without error 00% 18534 -
|
|
# 2 Extended offline Completed: read failure 00% 18333 18664237
|
|
|
|
Selective Self-tests/Logging not supported
|
|
|
|
SCT Commands not supported
|
|
|
|
Device Statistics (GP/SMART Log 0x04) not supported
|
|
|
|
Pending Defects log (GP Log 0x0c) not supported
|
|
|
|
SATA Phy Event Counters (GP Log 0x11) not supported
|
|
|