80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Seagate/ST1000/ST1000DM003-1CH162/070EC0E5C5EC
Andrey Ponomarenko 06d1e49c98 Update of reports (new: 3633, modified: 0)
2023-02-14 01:25:13 +03:00

318 lines
16 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.0-STABLE amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST1000DM003-1CH162
Serial Number: --
LU WWN Device Id: 5 000c50 ...
Firmware Version: CC47
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database 7.3/5319
ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Aug 9 13:07:31 2022 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 584) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 110) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3085) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 112 098 006 - 49352440
3 Spin_Up_Time PO---- 097 097 000 - 0
4 Start_Stop_Count -O--CK 099 099 020 - 1925
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 8
7 Seek_Error_Rate POSR-- 087 060 030 - 496723251
9 Power_On_Hours -O--CK 081 081 000 - 17033
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 099 099 020 - 1926
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
184 End-to-End_Error -O--CK 099 099 099 NOW 1
187 Reported_Uncorrect -O--CK 010 010 000 - 90
188 Command_Timeout -O--CK 100 100 000 - 0 0 0
189 High_Fly_Writes -O-RCK 090 090 000 - 10
190 Airflow_Temperature_Cel -O---K 068 054 045 - 32 (Min/Max 30/35)
191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
192 Power-Off_Retract_Count -O--CK 100 100 000 - 69
193 Load_Cycle_Count -O--CK 098 098 000 - 4966
194 Temperature_Celsius -O---K 032 046 000 - 32 (0 14 0 0 0)
197 Current_Pending_Sector -O--C- 099 099 000 - 280
198 Offline_Uncorrectable ----C- 099 099 000 - 280
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
240 Head_Flying_Hours ------ 100 253 000 - 17124h+04m+10.209s
241 Total_LBAs_Written ------ 100 253 000 - 74774656122
242 Total_LBAs_Read ------ 100 253 000 - 53172217064
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 20 Device vendor specific log
0xa2 GPL VS 4496 Device vendor specific log
0xa8 GPL,SL VS 129 Device vendor specific log
0xa9 GPL,SL VS 1 Device vendor specific log
0xab GPL VS 1 Device vendor specific log
0xb0 GPL VS 5176 Device vendor specific log
0xbe-0xbf GPL VS 65535 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL,SL VS 10 Device vendor specific log
0xc4 GPL,SL VS 5 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 90 (device log contains only the most recent 20 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 90 [9] occurred at disk power-on lifetime: 15367 hours (640 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 53 21 88 48 00 00 Error: UNC at LBA = 0x53218848 = 1394706504
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 a0 00 00 53 21 88 40 40 00 11d+01:49:20.496 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 00 00 11d+01:49:20.469 READ LOG EXT
60 00 00 00 a0 00 00 53 21 88 40 40 00 11d+01:49:16.908 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 00 00 11d+01:49:16.877 READ LOG EXT
60 00 00 00 a0 00 00 53 21 88 40 40 00 11d+01:49:13.311 READ FPDMA QUEUED
Error 89 [8] occurred at disk power-on lifetime: 15367 hours (640 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 53 21 88 48 00 00 Error: UNC at LBA = 0x53218848 = 1394706504
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 a0 00 00 53 21 88 40 40 00 11d+01:49:16.908 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 00 00 11d+01:49:16.877 READ LOG EXT
60 00 00 00 a0 00 00 53 21 88 40 40 00 11d+01:49:13.311 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 00 00 11d+01:49:13.284 READ LOG EXT
60 00 00 00 a0 00 00 53 21 88 40 40 00 11d+01:49:09.732 READ FPDMA QUEUED
Error 88 [7] occurred at disk power-on lifetime: 15367 hours (640 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 53 21 88 48 00 00 Error: UNC at LBA = 0x53218848 = 1394706504
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 a0 00 00 53 21 88 40 40 00 11d+01:49:13.311 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 00 00 11d+01:49:13.284 READ LOG EXT
60 00 00 00 a0 00 00 53 21 88 40 40 00 11d+01:49:09.732 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 00 00 11d+01:49:09.700 READ LOG EXT
60 00 00 00 a0 00 00 53 21 88 40 40 00 11d+01:49:06.115 READ FPDMA QUEUED
Error 87 [6] occurred at disk power-on lifetime: 15367 hours (640 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 53 21 88 48 00 00 Error: UNC at LBA = 0x53218848 = 1394706504
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 a0 00 00 53 21 88 40 40 00 11d+01:49:09.732 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 00 00 11d+01:49:09.700 READ LOG EXT
60 00 00 00 a0 00 00 53 21 88 40 40 00 11d+01:49:06.115 READ FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 40 00 11d+01:49:06.022 FLUSH CACHE EXT
61 00 00 00 10 00 00 74 70 66 10 40 00 11d+01:49:06.022 WRITE FPDMA QUEUED
Error 86 [5] occurred at disk power-on lifetime: 15367 hours (640 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 53 21 88 48 00 00 Error: UNC at LBA = 0x53218848 = 1394706504
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 a0 00 00 53 21 88 40 40 00 11d+01:49:06.115 READ FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 40 00 11d+01:49:06.022 FLUSH CACHE EXT
61 00 00 00 10 00 00 74 70 66 10 40 00 11d+01:49:06.022 WRITE FPDMA QUEUED
61 00 00 00 10 00 00 74 70 64 10 40 00 11d+01:49:06.022 WRITE FPDMA QUEUED
61 00 00 00 10 00 00 01 06 4a 10 40 00 11d+01:49:06.022 WRITE FPDMA QUEUED
Error 85 [4] occurred at disk power-on lifetime: 15367 hours (640 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 53 21 88 48 00 00 Error: UNC at LBA = 0x53218848 = 1394706504
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 a0 00 00 53 21 88 40 40 00 11d+01:49:02.347 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 00 00 11d+01:49:02.307 READ LOG EXT
60 00 00 00 a0 00 00 53 21 88 40 40 00 11d+01:48:58.756 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 00 00 11d+01:48:58.709 READ LOG EXT
60 00 00 00 a0 00 00 53 21 88 40 40 00 11d+01:48:55.150 READ FPDMA QUEUED
Error 84 [3] occurred at disk power-on lifetime: 15367 hours (640 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 53 21 88 48 00 00 Error: UNC at LBA = 0x53218848 = 1394706504
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 a0 00 00 53 21 88 40 40 00 11d+01:48:58.756 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 00 00 11d+01:48:58.709 READ LOG EXT
60 00 00 00 a0 00 00 53 21 88 40 40 00 11d+01:48:55.150 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 00 00 11d+01:48:54.901 READ LOG EXT
61 00 00 00 08 00 00 49 e6 78 f0 40 00 11d+01:48:51.358 WRITE FPDMA QUEUED
Error 83 [2] occurred at disk power-on lifetime: 15367 hours (640 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 53 21 88 48 00 00 Error: UNC at LBA = 0x53218848 = 1394706504
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 a0 00 00 53 21 88 40 40 00 11d+01:48:55.150 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 00 00 11d+01:48:54.901 READ LOG EXT
61 00 00 00 08 00 00 49 e6 78 f0 40 00 11d+01:48:51.358 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 49 e6 78 a8 40 00 11d+01:48:51.358 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 49 e6 78 90 40 00 11d+01:48:51.358 WRITE FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
Device State: Active (0)
Current Temperature: 32 Celsius
Power Cycle Min/Max Temperature: 30/35 Celsius
Lifetime Min/Max Temperature: 14/46 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Data Table command not supported
SCT Error Recovery Control command not supported
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 31 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
View Git Blame Copy Permalink