mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
125 lines
6.6 KiB
Plaintext
125 lines
6.6 KiB
Plaintext
smartctl 7.4 2023-08-01 r5530 [OpenBSD 7.6 amd64] (local build)
|
|
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Model Family: Seagate Video 3.5 HDD
|
|
Device Model: ST1000VM002-1SD102
|
|
Serial Number: --
|
|
LU WWN Device Id: 5 000c50 ...
|
|
Firmware Version: SC11
|
|
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
|
|
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
|
Rotation Rate: 5900 rpm
|
|
Form Factor: 3.5 inches
|
|
Device is: In smartctl database 7.3/5528
|
|
ATA Version is: ATA8-ACS T13/1699-D revision 4
|
|
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
|
Local Time is: Sat Nov 9 08:17:39 2024 -03
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART Status not supported: Incomplete response, ATA output registers missing
|
|
SMART overall-health self-assessment test result: PASSED
|
|
Warning: This result is based on an Attribute check.
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x00) Offline data collection activity
|
|
was never started.
|
|
Auto Offline Data Collection: Disabled.
|
|
Self-test execution status: ( 0) The previous self-test routine completed
|
|
without error or no self-test has ever
|
|
been run.
|
|
Total time to complete Offline
|
|
data collection: ( 0) seconds.
|
|
Offline data collection
|
|
capabilities: (0x73) SMART execute Offline immediate.
|
|
Auto Offline data collection on/off support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
No Offline surface scan supported.
|
|
Self-test supported.
|
|
Conveyance Self-test supported.
|
|
Selective Self-test supported.
|
|
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
General Purpose Logging supported.
|
|
Short self-test routine
|
|
recommended polling time: ( 1) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 125) minutes.
|
|
Conveyance self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
SCT capabilities: (0x10bb) SCT Status supported.
|
|
SCT Error Recovery Control supported.
|
|
SCT Feature Control supported.
|
|
SCT Data Table supported.
|
|
|
|
SMART Attributes Data Structure revision number: 10
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
|
1 Raw_Read_Error_Rate 0x000f 081 063 006 Pre-fail Always - 123557921
|
|
3 Spin_Up_Time 0x0003 097 097 000 Pre-fail Always - 0
|
|
4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1797
|
|
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
|
|
7 Seek_Error_Rate 0x000f 087 060 045 Pre-fail Always - 485297733
|
|
9 Power_On_Hours 0x0032 083 083 000 Old_age Always - 15499
|
|
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
|
|
12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1481
|
|
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
|
|
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
|
|
188 Command_Timeout 0x0032 100 099 000 Old_age Always - 524299
|
|
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
|
|
190 Airflow_Temperature_Cel 0x0022 072 052 040 Old_age Always - 28 (Min/Max 22/28)
|
|
193 Load_Cycle_Count 0x0032 099 099 000 Old_age Always - 2276
|
|
194 Temperature_Celsius 0x0022 028 008 000 Old_age Always - 28 (0 8 0 0 0)
|
|
195 Hardware_ECC_Recovered 0x001a 001 001 000 Old_age Always - 123557921
|
|
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
|
|
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
|
|
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
|
|
|
|
SMART Error Log Version: 1
|
|
No Errors Logged
|
|
|
|
SMART Self-test log structure revision number 1
|
|
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|
# 1 Short offline Completed without error 00% 14452 -
|
|
# 2 Selective offline Completed without error 00% 11417 -
|
|
# 3 Selective offline Aborted by host 90% 11416 -
|
|
# 4 Selective offline Aborted by host 90% 11415 -
|
|
# 5 Selective offline Aborted by host 90% 11414 -
|
|
# 6 Selective offline Aborted by host 90% 11411 -
|
|
# 7 Selective offline Aborted by host 90% 11410 -
|
|
# 8 Selective offline Aborted by host 90% 11409 -
|
|
# 9 Selective offline Aborted by host 90% 11408 -
|
|
#10 Selective offline Aborted by host 90% 11407 -
|
|
#11 Selective offline Aborted by host 90% 11406 -
|
|
#12 Selective offline Aborted by host 90% 11405 -
|
|
#13 Selective offline Aborted by host 90% 11404 -
|
|
#14 Selective offline Aborted by host 90% 11403 -
|
|
#15 Selective offline Aborted by host 90% 11401 -
|
|
#16 Selective offline Aborted by host 90% 11400 -
|
|
#17 Selective offline Aborted by host 90% 11399 -
|
|
#18 Selective offline Aborted by host 90% 11398 -
|
|
#19 Selective offline Completed without error 00% 10677 -
|
|
#20 Selective offline Aborted by host 90% 10673 -
|
|
#21 Selective offline Aborted by host 90% 10672 -
|
|
|
|
SMART Selective self-test log data structure revision number 1
|
|
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|
1 1932266008 1953525167 Not_testing
|
|
2 0 0 Not_testing
|
|
3 0 0 Not_testing
|
|
4 0 0 Not_testing
|
|
5 0 0 Not_testing
|
|
Selective self-test flags (0x0):
|
|
After scanning selected spans, do NOT read-scan remainder of disk.
|
|
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|
|
|
The above only provides legacy SMART information - try 'smartctl -x' for more
|
|
|
|
|
|
|