mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
104 lines
5.2 KiB
Plaintext
104 lines
5.2 KiB
Plaintext
smartctl 7.2 2020-12-30 r5155 [NetBSD 9.99.94 amd64] (local build)
|
|
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Model Family: Seagate Barracuda Green (AF)
|
|
Device Model: ST2000DL003-9VT166
|
|
Serial Number: --
|
|
LU WWN Device Id: 5 000c50 ...
|
|
Firmware Version: CC3C
|
|
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
|
|
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
|
Rotation Rate: 5900 rpm
|
|
Device is: In smartctl database [for details use: -P show]
|
|
ATA Version is: ATA8-ACS T13/1699-D revision 4
|
|
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
|
|
Local Time is: Tue Mar 15 12:16:24 2022 AEDT
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART overall-health self-assessment test result: PASSED
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x82) Offline data collection activity
|
|
was completed without error.
|
|
Auto Offline Data Collection: Enabled.
|
|
Self-test execution status: ( 0) The previous self-test routine completed
|
|
without error or no self-test has ever
|
|
been run.
|
|
Total time to complete Offline
|
|
data collection: ( 612) seconds.
|
|
Offline data collection
|
|
capabilities: (0x7b) SMART execute Offline immediate.
|
|
Auto Offline data collection on/off support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
Offline surface scan supported.
|
|
Self-test supported.
|
|
Conveyance Self-test supported.
|
|
Selective Self-test supported.
|
|
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
General Purpose Logging supported.
|
|
Short self-test routine
|
|
recommended polling time: ( 1) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 329) minutes.
|
|
Conveyance self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
SCT capabilities: (0x30b7) SCT Status supported.
|
|
SCT Feature Control supported.
|
|
SCT Data Table supported.
|
|
|
|
SMART Attributes Data Structure revision number: 10
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
|
1 Raw_Read_Error_Rate 0x000f 117 099 006 Pre-fail Always - 159462624
|
|
3 Spin_Up_Time 0x0003 092 091 000 Pre-fail Always - 0
|
|
4 Start_Stop_Count 0x0032 096 096 020 Old_age Always - 4736
|
|
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
|
|
7 Seek_Error_Rate 0x000f 081 060 030 Pre-fail Always - 17792421677
|
|
9 Power_On_Hours 0x0032 042 042 000 Old_age Always - 51122
|
|
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
|
|
12 Power_Cycle_Count 0x0032 096 096 020 Old_age Always - 4738
|
|
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
|
|
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
|
|
187 Reported_Uncorrect 0x0032 099 099 000 Old_age Always - 1
|
|
188 Command_Timeout 0x0032 100 090 000 Old_age Always - 4295033377
|
|
189 High_Fly_Writes 0x003a 097 097 000 Old_age Always - 3
|
|
190 Airflow_Temperature_Cel 0x0022 061 046 045 Old_age Always - 39 (Min/Max 23/39)
|
|
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
|
|
192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 2195
|
|
193 Load_Cycle_Count 0x0032 098 098 000 Old_age Always - 4736
|
|
194 Temperature_Celsius 0x0022 039 054 000 Old_age Always - 39 (0 9 0 0 0)
|
|
195 Hardware_ECC_Recovered 0x001a 024 006 000 Old_age Always - 159462624
|
|
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
|
|
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
|
|
199 UDMA_CRC_Error_Count 0x003e 200 188 000 Old_age Always - 178
|
|
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 51176 (76 227 0)
|
|
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 466842415
|
|
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 4119103107
|
|
|
|
SMART Error Log Version: 1
|
|
No Errors Logged
|
|
|
|
SMART Self-test log structure revision number 1
|
|
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
|
|
|
SMART Selective self-test log data structure revision number 1
|
|
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|
1 0 0 Not_testing
|
|
2 0 0 Not_testing
|
|
3 0 0 Not_testing
|
|
4 0 0 Not_testing
|
|
5 0 0 Not_testing
|
|
Selective self-test flags (0x0):
|
|
After scanning selected spans, do NOT read-scan remainder of disk.
|
|
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|
|
|
|
|
|