80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Seagate/ST2000/ST2000DL003-9VT166/B75B576124C8
Andrey Ponomarenko a41331e270 Update of reports (new: 14, modified: 3797)
2023-02-14 02:15:20 +03:00

320 lines
16 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p11 amd64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda Green (AF)
Device Model: ST2000DL003-9VT166
Serial Number: --
LU WWN Device Id: 5 000c50 ...
Firmware Version: CC32
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5900 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Wed Sep 16 16:28:50 2020 -03
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM level is: 0 (vendor specific), recommended: 254
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 623) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 352) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x30b7) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 118 099 006 - 176841600
3 Spin_Up_Time PO---- 088 086 000 - 0
4 Start_Stop_Count -O--CK 099 099 020 - 1392
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
7 Seek_Error_Rate POSR-- 081 060 030 - 136384239
9 Power_On_Hours -O--CK 052 052 000 - 42535
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 099 099 020 - 1356
183 Runtime_Bad_Block -O--CK 095 095 000 - 5
184 End-to-End_Error -O--CK 100 100 099 - 0
187 Reported_Uncorrect -O--CK 085 085 000 - 15
188 Command_Timeout -O--CK 100 100 000 - 0
189 High_Fly_Writes -O-RCK 011 011 000 - 89
190 Airflow_Temperature_Cel -O---K 057 048 045 - 43 (Min/Max 32/46)
191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
192 Power-Off_Retract_Count -O--CK 100 100 000 - 1222
193 Load_Cycle_Count -O--CK 100 100 000 - 1414
194 Temperature_Celsius -O---K 043 052 000 - 43 (0 14 0 0 0)
195 Hardware_ECC_Recovered -O-RC- 030 004 000 - 176841600
197 Current_Pending_Sector -O--C- 100 099 000 - 0
198 Offline_Uncorrectable ----C- 100 099 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
240 Head_Flying_Hours ------ 100 253 000 - 42507 (45 171 0)
241 Total_LBAs_Written ------ 100 253 000 - 2955074796
242 Total_LBAs_Read ------ 100 253 000 - 1017322262
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 20 Device vendor specific log
0xa2 GPL VS 2248 Device vendor specific log
0xa8 GPL,SL VS 20 Device vendor specific log
0xa9 GPL,SL VS 1 Device vendor specific log
0xab GPL VS 1 Device vendor specific log
0xb0 GPL VS 2819 Device vendor specific log
0xbd GPL VS 252 Device vendor specific log
0xbe-0xbf GPL VS 65535 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 7
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 7 [6] occurred at disk power-on lifetime: 41056 hours (1710 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 45 a0 01 20 00 00 Error: UNC at LBA = 0x45a00120 = 1168113952
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 80 00 00 45 a0 01 08 40 00 11d+15:27:34.411 READ FPDMA QUEUED
27 00 00 00 00 00 00 00 00 00 00 e0 00 11d+15:27:34.406 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 00 00 00 00 00 a0 00 11d+15:27:34.405 IDENTIFY DEVICE
ef 00 03 00 45 00 00 00 00 00 00 a0 00 11d+15:27:34.405 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 00 00 00 00 00 e0 00 11d+15:27:34.405 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 6 [5] occurred at disk power-on lifetime: 41056 hours (1710 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 45 a0 01 20 00 00 Error: UNC at LBA = 0x45a00120 = 1168113952
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 80 00 00 45 a0 01 08 40 00 11d+15:27:31.011 READ FPDMA QUEUED
27 00 00 00 00 00 00 00 00 00 00 e0 00 11d+15:27:31.002 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 00 00 00 00 00 a0 00 11d+15:27:31.001 IDENTIFY DEVICE
ef 00 03 00 45 00 00 00 00 00 00 a0 00 11d+15:27:31.001 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 00 00 00 00 00 e0 00 11d+15:27:31.001 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 5 [4] occurred at disk power-on lifetime: 41056 hours (1710 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 45 a0 01 20 00 00 Error: UNC at LBA = 0x45a00120 = 1168113952
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 80 00 00 45 a0 01 08 40 00 11d+15:27:27.613 READ FPDMA QUEUED
27 00 00 00 00 00 00 00 00 00 00 e0 00 11d+15:27:27.608 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 00 00 00 00 00 a0 00 11d+15:27:27.607 IDENTIFY DEVICE
ef 00 03 00 45 00 00 00 00 00 00 a0 00 11d+15:27:27.607 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 00 00 00 00 00 e0 00 11d+15:27:27.607 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 4 [3] occurred at disk power-on lifetime: 41056 hours (1710 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 45 a0 01 20 00 00 Error: UNC at LBA = 0x45a00120 = 1168113952
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 80 00 00 45 a0 01 08 40 00 11d+15:27:24.190 READ FPDMA QUEUED
60 00 00 00 40 00 00 44 00 01 48 40 00 11d+15:27:24.189 READ FPDMA QUEUED
27 00 00 00 00 00 00 00 00 00 00 e0 00 11d+15:27:24.183 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 00 00 00 00 00 a0 00 11d+15:27:24.183 IDENTIFY DEVICE
ef 00 03 00 45 00 00 00 00 00 00 a0 00 11d+15:27:24.183 SET FEATURES [Set transfer mode]
Error 3 [2] occurred at disk power-on lifetime: 41056 hours (1710 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 45 a0 01 20 00 00 Error: UNC at LBA = 0x45a00120 = 1168113952
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 80 00 00 45 80 02 88 40 00 11d+15:27:20.773 READ FPDMA QUEUED
60 00 00 00 40 00 00 44 00 01 48 40 00 11d+15:27:20.773 READ FPDMA QUEUED
60 00 00 00 80 00 00 45 a0 01 08 40 00 11d+15:27:20.773 READ FPDMA QUEUED
60 00 00 00 40 00 00 45 80 01 88 40 00 11d+15:27:20.772 READ FPDMA QUEUED
27 00 00 00 00 00 00 00 00 00 00 e0 00 11d+15:27:20.767 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 2 [1] occurred at disk power-on lifetime: 41056 hours (1710 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 45 a0 01 20 00 00 Error: UNC at LBA = 0x45a00120 = 1168113952
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 40 00 00 44 00 01 48 40 00 11d+15:27:17.271 READ FPDMA QUEUED
60 00 00 00 80 00 00 45 a0 01 08 40 00 11d+15:27:17.268 READ FPDMA QUEUED
60 00 00 00 40 00 00 45 a0 00 88 40 00 11d+15:27:17.260 READ FPDMA QUEUED
60 00 00 00 80 00 00 45 80 02 88 40 00 11d+15:27:17.246 READ FPDMA QUEUED
60 00 00 00 40 00 00 45 80 01 88 40 00 11d+15:27:17.246 READ FPDMA QUEUED
Error 1 [0] occurred at disk power-on lifetime: 29964 hours (1248 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 9e 3f c2 20 00 00 Error: UNC at LBA = 0x9e3fc220 = 2654978592
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 04 00 00 00 9e 3f d0 00 40 00 05:31:36.543 READ FPDMA QUEUED
60 00 00 02 e0 00 00 9e 3f cd 20 40 00 05:31:36.543 READ FPDMA QUEUED
60 00 00 01 20 00 00 9e 3f cc 00 40 00 05:31:36.542 READ FPDMA QUEUED
60 00 00 04 00 00 00 9e 3f c4 00 40 00 05:31:36.541 READ FPDMA QUEUED
60 00 00 02 e0 00 00 9e 3f c1 20 40 00 05:31:36.541 READ FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 42519 -
# 2 Short offline Completed without error 00% 42495 -
# 3 Short offline Completed without error 00% 42471 -
# 4 Extended offline Completed without error 00% 42453 -
# 5 Short offline Completed without error 00% 42423 -
# 6 Short offline Completed without error 00% 42399 -
# 7 Short offline Completed without error 00% 42375 -
# 8 Short offline Completed without error 00% 42351 -
# 9 Extended offline Completed without error 00% 41770 -
#10 Extended offline Completed without error 00% 41603 -
#11 Extended offline Completed without error 00% 41286 -
#12 Extended offline Completed without error 00% 40809 -
#13 Short offline Completed without error 00% 40777 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
Device State: Active (0)
Current Temperature: 43 Celsius
Power Cycle Min/Max Temperature: 32/46 Celsius
Lifetime Min/Max Temperature: 14/52 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 59 minutes
Min/Max recommended Temperature: 14/55 Celsius
Min/Max Temperature Limit: 10/60 Celsius
Temperature History Size (Index): 128 (41)
SCT Error Recovery Control command not supported
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 8 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
View Git Blame Copy Permalink