80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Seagate/ST2000/ST2000DM001-1CH164/1D2AFDA794FB
Andrey Ponomarenko 51569f7bd1 Update of reports (new: 1098, modified: 0)
2020-11-03 14:43:05 +03:00

338 lines
18 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST2000DM001-1CH164
Serial Number: --
LU WWN Device Id: 5 000c50 ...
Firmware Version: CC24
User Capacity: 2,000,397,852,160 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Aug 19 16:26:47 2020 EEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 584) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 225) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3085) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 115 091 006 - 98618624
3 Spin_Up_Time PO---- 097 095 000 - 0
4 Start_Stop_Count -O--CK 098 098 020 - 2369
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
7 Seek_Error_Rate POSR-- 069 060 030 - 77430059447
9 Power_On_Hours -O--CK 085 085 000 - 13239
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 099 099 020 - 1788
183 Runtime_Bad_Block -O--CK 099 099 000 - 1
184 End-to-End_Error -O--CK 100 100 099 - 0
187 Reported_Uncorrect -O--CK 001 001 000 - 2722
188 Command_Timeout -O--CK 100 097 000 - 8 8 14
189 High_Fly_Writes -O-RCK 001 001 000 - 179
190 Airflow_Temperature_Cel -O---K 068 054 045 - 32 (Min/Max 26/32)
191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
192 Power-Off_Retract_Count -O--CK 100 100 000 - 248
193 Load_Cycle_Count -O--CK 097 097 000 - 6401
194 Temperature_Celsius -O---K 032 046 000 - 32 (0 16 0 0 0)
197 Current_Pending_Sector -O--C- 100 097 000 - 0
198 Offline_Uncorrectable ----C- 100 097 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 192 000 - 1760
240 Head_Flying_Hours ------ 100 253 000 - 11862h+12m+45.574s
241 Total_LBAs_Written ------ 100 253 000 - 99631280960
242 Total_LBAs_Read ------ 100 253 000 - 74765537603
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 20 Device vendor specific log
0xa2 GPL VS 4496 Device vendor specific log
0xa8 GPL,SL VS 129 Device vendor specific log
0xa9 GPL,SL VS 1 Device vendor specific log
0xab GPL VS 1 Device vendor specific log
0xb0 GPL VS 5176 Device vendor specific log
0xbd GPL VS 512 Device vendor specific log
0xbe-0xbf GPL VS 65535 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL,SL VS 10 Device vendor specific log
0xc4 GPL,SL VS 5 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 2726 (device log contains only the most recent 20 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 2726 [5] occurred at disk power-on lifetime: 6639 hours (276 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 80 ca 1e 68 00 00 Error: UNC at LBA = 0x80ca1e68 = 2160729704
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 08 00 00 80 ca 1e 68 40 00 02:19:32.680 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 00 00 02:19:32.651 READ LOG EXT
60 00 00 00 08 00 00 80 ca 1e 68 40 00 02:19:29.793 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 00 00 02:19:29.759 READ LOG EXT
60 00 00 00 08 00 00 80 ca 1e 68 40 00 02:19:26.920 READ FPDMA QUEUED
Error 2725 [4] occurred at disk power-on lifetime: 6639 hours (276 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 80 ca 1e 68 00 00 Error: UNC at LBA = 0x80ca1e68 = 2160729704
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 08 00 00 80 ca 1e 68 40 00 02:19:29.793 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 00 00 02:19:29.759 READ LOG EXT
60 00 00 00 08 00 00 80 ca 1e 68 40 00 02:19:26.920 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 00 00 02:19:26.891 READ LOG EXT
60 00 00 00 08 00 00 80 ca 1e 68 40 00 02:19:24.045 READ FPDMA QUEUED
Error 2724 [3] occurred at disk power-on lifetime: 6639 hours (276 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 80 ca 1e 68 00 00 Error: UNC at LBA = 0x80ca1e68 = 2160729704
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 08 00 00 80 ca 1e 68 40 00 02:19:26.920 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 00 00 02:19:26.891 READ LOG EXT
60 00 00 00 08 00 00 80 ca 1e 68 40 00 02:19:24.045 READ FPDMA QUEUED
60 00 00 00 08 00 00 70 ca dc 68 40 00 02:19:24.044 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 00 00 02:19:23.944 READ LOG EXT
Error 2723 [2] occurred at disk power-on lifetime: 6639 hours (276 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 80 ca 1e 68 00 00 Error: UNC at LBA = 0x80ca1e68 = 2160729704
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 08 00 00 80 ca 1e 68 40 00 02:19:24.045 READ FPDMA QUEUED
60 00 00 00 08 00 00 70 ca dc 68 40 00 02:19:24.044 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 00 00 02:19:23.944 READ LOG EXT
60 00 00 00 08 00 00 a0 c8 c3 e0 40 00 02:19:20.896 READ FPDMA QUEUED
60 00 00 00 08 00 00 e6 f0 ba 08 40 00 02:19:20.896 READ FPDMA QUEUED
Error 2722 [1] occurred at disk power-on lifetime: 6639 hours (276 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 80 ca 1e 68 00 00 Error: UNC at LBA = 0x80ca1e68 = 2160729704
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 08 00 00 a0 c8 c3 e0 40 00 02:19:20.896 READ FPDMA QUEUED
60 00 00 00 08 00 00 e6 f0 ba 08 40 00 02:19:20.896 READ FPDMA QUEUED
60 00 00 00 08 00 00 80 ca 1e 68 40 00 02:19:20.896 READ FPDMA QUEUED
60 00 00 00 08 00 00 70 ca dc 68 40 00 02:19:20.896 READ FPDMA QUEUED
60 00 00 00 08 00 00 a0 ce 55 88 40 00 02:19:20.896 READ FPDMA QUEUED
Error 2721 [0] occurred at disk power-on lifetime: 6093 hours (253 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 15 14 87 a8 00 00 Error: UNC at LBA = 0x151487a8 = 353666984
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 01 00 00 00 15 14 dd a8 40 00 01:50:11.196 READ FPDMA QUEUED
60 00 00 01 00 00 00 15 14 ed a8 40 00 01:50:11.196 READ FPDMA QUEUED
60 00 00 01 00 00 00 15 14 8a a8 40 00 01:50:11.196 READ FPDMA QUEUED
60 00 00 01 00 00 00 15 14 89 a8 40 00 01:50:11.196 READ FPDMA QUEUED
60 00 00 01 00 00 00 15 14 88 a8 40 00 01:50:11.195 READ FPDMA QUEUED
Error 2720 [19] occurred at disk power-on lifetime: 6093 hours (253 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 15 14 87 a8 00 00 Error: WP at LBA = 0x151487a8 = 353666984
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 40 00 00 2a 98 34 68 40 00 01:50:08.300 WRITE FPDMA QUEUED
61 00 00 00 40 00 00 2b 22 17 28 40 00 01:50:08.299 WRITE FPDMA QUEUED
61 00 00 00 18 00 00 29 13 f1 10 40 00 01:50:08.298 WRITE FPDMA QUEUED
60 00 00 01 00 00 00 15 14 dd a8 40 00 01:50:08.298 READ FPDMA QUEUED
60 00 00 01 00 00 00 15 14 ed a8 40 00 01:50:08.298 READ FPDMA QUEUED
Error 2719 [18] occurred at disk power-on lifetime: 6093 hours (253 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 15 14 87 a8 00 00 Error: WP at LBA = 0x151487a8 = 353666984
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 18 00 00 29 13 f1 10 40 00 01:50:05.828 WRITE FPDMA QUEUED
61 00 00 00 40 00 00 2a 98 34 68 40 00 01:50:05.391 WRITE FPDMA QUEUED
61 00 00 00 40 00 00 2b 22 17 28 40 00 01:50:05.390 WRITE FPDMA QUEUED
60 00 00 01 00 00 00 15 14 dd a8 40 00 01:50:05.390 READ FPDMA QUEUED
60 00 00 01 00 00 00 15 14 ed a8 40 00 01:50:05.390 READ FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 9047 -
# 2 Extended offline Completed without error 00% 8982 -
# 3 Extended offline Aborted by host 90% 8934 -
# 4 Short offline Completed without error 00% 8934 -
# 5 Short offline Completed without error 00% 7167 -
# 6 Short offline Completed without error 00% 7150 -
# 7 Short offline Completed without error 00% 7136 -
# 8 Short offline Completed without error 00% 7123 -
# 9 Short offline Completed without error 00% 7110 -
#10 Short offline Completed without error 00% 7096 -
#11 Extended offline Interrupted (host reset) 90% 7080 -
#12 Short offline Completed without error 00% 7069 -
#13 Short offline Completed without error 00% 7052 -
#14 Short offline Completed without error 00% 7034 -
#15 Short offline Completed without error 00% 7019 -
#16 Short offline Completed without error 00% 6594 -
#17 Short offline Completed without error 00% 6574 -
#18 Short offline Completed without error 00% 6479 -
#19 Short offline Completed without error 00% 6461 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
Device State: Active (0)
Current Temperature: 29 Celsius
Power Cycle Min/Max Temperature: 26/29 Celsius
Lifetime Min/Max Temperature: 16/46 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Data Table command not supported
SCT Error Recovery Control command not supported
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
View Git Blame Copy Permalink