80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Seagate/ST2000/ST2000DM001-9YN164/8A373BF0CFC7
Andrey Ponomarenko 06d1e49c98 Update of reports (new: 3633, modified: 0)
2023-02-14 01:25:13 +03:00

318 lines
16 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.0-RELEASE-p12 amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST2000DM001-9YN164
Serial Number: --
LU WWN Device Id: 5 000c50 ...
Firmware Version: CC4H
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Device is: In smartctl database 7.2/5254
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is: Sun Aug 14 12:34:21 2022 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 254 (maximum performance)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 575) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 223) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3085) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 118 099 006 - 187295952
3 Spin_Up_Time PO---- 095 094 000 - 0
4 Start_Stop_Count -O--CK 100 100 020 - 104
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
7 Seek_Error_Rate POSR-- 079 060 030 - 13128501680
9 Power_On_Hours -O--CK 065 065 000 - 31348
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 100 100 020 - 101
183 Runtime_Bad_Block -O--CK 001 001 000 - 4005
184 End-to-End_Error -O--CK 100 100 099 - 0
187 Reported_Uncorrect -O--CK 001 001 000 - 109
188 Command_Timeout -O--CK 100 097 000 - 119 119 132
189 High_Fly_Writes -O-RCK 099 099 000 - 1
190 Airflow_Temperature_Cel -O---K 058 051 045 - 42 (Min/Max 27/48)
191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
192 Power-Off_Retract_Count -O--CK 100 100 000 - 70
193 Load_Cycle_Count -O--CK 050 050 000 - 100029
194 Temperature_Celsius -O---K 042 049 000 - 42 (0 19 0 0 0)
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 131 000 - 71982
240 Head_Flying_Hours ------ 100 253 000 - 24686h+10m+01.953s
241 Total_LBAs_Written ------ 100 253 000 - 64996686611340
242 Total_LBAs_Read ------ 100 253 000 - 194221905140606
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 20 Device vendor specific log
0xa2 GPL VS 4496 Device vendor specific log
0xa8 GPL,SL VS 20 Device vendor specific log
0xa9 GPL,SL VS 1 Device vendor specific log
0xab GPL VS 1 Device vendor specific log
0xb0 GPL VS 5067 Device vendor specific log
0xbd GPL VS 512 Device vendor specific log
0xbe-0xbf GPL VS 65535 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 109 (device log contains only the most recent 20 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 109 [8] occurred at disk power-on lifetime: 25540 hours (1064 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 9f 17 20 18 00 00 Error: UNC at LBA = 0x9f172018 = 2669092888
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 08 00 00 69 e1 af c8 40 00 15d+12:26:16.034 READ FPDMA QUEUED
60 00 00 00 08 00 00 69 e1 af b8 40 00 15d+12:26:16.034 READ FPDMA QUEUED
60 00 00 06 80 00 00 2a 44 4f f0 40 00 15d+12:26:16.034 READ FPDMA QUEUED
60 00 00 02 b0 00 00 9f 17 1e b8 40 00 15d+12:26:16.034 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 00 00 15d+12:26:15.986 READ LOG EXT
Error 108 [7] occurred at disk power-on lifetime: 25540 hours (1064 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 9f 17 20 18 00 00 Error: UNC at LBA = 0x9f172018 = 2669092888
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 08 00 00 69 e1 af c8 40 00 15d+12:26:13.086 READ FPDMA QUEUED
60 00 00 00 08 00 00 69 e1 af b8 40 00 15d+12:26:13.086 READ FPDMA QUEUED
60 00 00 06 80 00 00 2a 44 4f f0 40 00 15d+12:26:13.086 READ FPDMA QUEUED
60 00 00 02 b0 00 00 9f 17 1e b8 40 00 15d+12:26:13.086 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 00 00 15d+12:26:13.086 READ LOG EXT
Error 107 [6] occurred at disk power-on lifetime: 25540 hours (1064 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 9f 17 20 18 00 00 Error: UNC at LBA = 0x9f172018 = 2669092888
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 02 b0 00 00 28 65 c2 88 40 00 15d+12:26:10.331 READ FPDMA QUEUED
60 00 00 02 b0 00 00 28 65 bf d8 40 00 15d+12:26:10.331 READ FPDMA QUEUED
60 00 00 02 b0 00 00 28 65 ba f8 40 00 15d+12:26:10.330 READ FPDMA QUEUED
60 00 00 02 b0 00 00 9f 17 1e b8 40 00 15d+12:26:10.322 READ FPDMA QUEUED
61 00 00 00 10 00 00 00 00 02 10 40 00 15d+12:26:10.315 WRITE FPDMA QUEUED
Error 106 [5] occurred at disk power-on lifetime: 25540 hours (1064 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 9f 17 20 18 00 00 Error: UNC at LBA = 0x9f172018 = 2669092888
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 08 00 00 00 0a 29 87 58 40 00 15d+12:26:07.414 READ FPDMA QUEUED
60 00 00 00 08 00 00 2a 42 c1 38 40 00 15d+12:26:07.414 READ FPDMA QUEUED
60 00 00 00 08 00 00 69 e1 b0 80 40 00 15d+12:26:07.414 READ FPDMA QUEUED
60 00 00 02 b0 00 00 9f 17 21 68 40 00 15d+12:26:07.414 READ FPDMA QUEUED
60 00 00 02 b0 00 00 9f 17 1e b8 40 00 15d+12:26:07.414 READ FPDMA QUEUED
Error 105 [4] occurred at disk power-on lifetime: 25540 hours (1064 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 9f 17 20 18 00 00 Error: UNC at LBA = 0x9f172018 = 2669092888
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 02 b0 00 00 9f 17 21 68 40 00 15d+12:26:04.597 READ FPDMA QUEUED
60 00 00 02 b0 00 00 9f 17 1e b8 40 00 15d+12:26:04.597 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 00 00 15d+12:26:04.511 READ LOG EXT
60 00 00 02 b0 00 00 9f 17 1c 08 40 00 15d+12:26:01.701 READ FPDMA QUEUED
60 00 00 02 b0 00 00 9f 17 13 f8 40 00 15d+12:26:01.675 READ FPDMA QUEUED
Error 104 [3] occurred at disk power-on lifetime: 25540 hours (1064 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 9f 17 20 18 00 00 Error: UNC at LBA = 0x9f172018 = 2669092888
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 02 b0 00 00 9f 17 1c 08 40 00 15d+12:26:01.701 READ FPDMA QUEUED
60 00 00 02 b0 00 00 9f 17 13 f8 40 00 15d+12:26:01.675 READ FPDMA QUEUED
60 00 00 02 b0 00 00 9f 17 19 58 40 00 15d+12:26:01.670 READ FPDMA QUEUED
60 00 00 02 b0 00 00 9f 17 16 a8 40 00 15d+12:26:01.662 READ FPDMA QUEUED
60 00 00 02 b0 00 00 9f 17 0e 98 40 00 15d+12:25:59.589 READ FPDMA QUEUED
Error 103 [2] occurred at disk power-on lifetime: 24379 hours (1015 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 7b c4 47 a8 00 00 Error: UNC at LBA = 0x7bc447a8 = 2076460968
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 d0 ff 00 80 00 00 7b ba 3f 00 40 00 01:39:52.841 READ DMA EXT
25 d0 ff 00 80 00 00 7b ba 3e 80 40 00 01:39:52.832 READ DMA EXT
25 d0 ff 00 80 00 00 7b aa 4d 00 40 00 01:39:50.025 READ DMA EXT
25 d0 ff 00 80 00 00 7b aa 4c 80 40 00 01:39:50.013 READ DMA EXT
25 d0 ff 00 80 00 00 7b aa 4c 00 40 00 01:39:50.012 READ DMA EXT
Error 102 [1] occurred at disk power-on lifetime: 24369 hours (1015 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 7b c4 47 a8 00 00 Error: UNC at LBA = 0x7bc447a8 = 2076460968
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 d8 00 00 80 00 00 7b c4 47 80 40 00 01:59:04.504 READ DMA EXT
25 d8 00 00 80 00 00 7b c4 47 00 40 00 01:59:04.504 READ DMA EXT
25 d8 00 00 80 00 00 7b c4 46 80 40 00 01:59:04.503 READ DMA EXT
25 d8 00 00 80 00 00 7b c4 46 00 40 00 01:59:04.503 READ DMA EXT
25 d8 00 00 80 00 00 7b c4 45 80 40 00 01:59:04.502 READ DMA EXT
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 20066 -
# 2 Short offline Completed without error 00% 20066 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
Device State: Active (0)
Current Temperature: 42 Celsius
Power Cycle Min/Max Temperature: 27/48 Celsius
Lifetime Min/Max Temperature: 19/49 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Data Table command not supported
SCT Error Recovery Control command not supported
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 4523 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
View Git Blame Copy Permalink