mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
230 lines
11 KiB
Plaintext
230 lines
11 KiB
Plaintext
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build)
|
|
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Model Family: Seagate Mobile HDD
|
|
Device Model: ST2000LM007-1R8174
|
|
Serial Number: --
|
|
LU WWN Device Id: 5 000c50 ...
|
|
Firmware Version: SBK2
|
|
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
|
|
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
|
Rotation Rate: 5400 rpm
|
|
Form Factor: 2.5 inches
|
|
Device is: In smartctl database 7.3/5319
|
|
ATA Version is: ACS-3 T13/2161-D revision 3b
|
|
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
|
Local Time is: Sun Jul 31 10:21:26 2022 EDT
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
AAM feature is: Unavailable
|
|
APM level is: 128 (minimum power consumption without standby)
|
|
Rd look-ahead is: Enabled
|
|
Write cache is: Enabled
|
|
DSN feature is: Unavailable
|
|
ATA Security is: Disabled, frozen [SEC2]
|
|
Wt Cache Reorder: Enabled
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART overall-health self-assessment test result: PASSED
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x00) Offline data collection activity
|
|
was never started.
|
|
Auto Offline Data Collection: Disabled.
|
|
Self-test execution status: ( 0) The previous self-test routine completed
|
|
without error or no self-test has ever
|
|
been run.
|
|
Total time to complete Offline
|
|
data collection: ( 0) seconds.
|
|
Offline data collection
|
|
capabilities: (0x71) SMART execute Offline immediate.
|
|
No Auto Offline data collection support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
No Offline surface scan supported.
|
|
Self-test supported.
|
|
Conveyance Self-test supported.
|
|
Selective Self-test supported.
|
|
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
General Purpose Logging supported.
|
|
Short self-test routine
|
|
recommended polling time: ( 1) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 333) minutes.
|
|
Conveyance self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
SCT capabilities: (0x3035) SCT Status supported.
|
|
SCT Feature Control supported.
|
|
SCT Data Table supported.
|
|
|
|
SMART Attributes Data Structure revision number: 10
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|
1 Raw_Read_Error_Rate POSR-- 051 031 006 - 81448202
|
|
3 Spin_Up_Time PO---- 097 097 000 - 0
|
|
4 Start_Stop_Count -O--CK 098 098 020 - 2800
|
|
5 Reallocated_Sector_Ct PO--CK 041 040 036 - 38040
|
|
7 Seek_Error_Rate POSR-- 082 060 045 - 177774292
|
|
9 Power_On_Hours -O--CK 073 073 000 - 23855 (176 253 0)
|
|
10 Spin_Retry_Count PO--C- 100 100 097 - 0
|
|
12 Power_Cycle_Count -O--CK 100 100 020 - 265
|
|
184 End-to-End_Error -O--CK 100 100 099 - 0
|
|
187 Reported_Uncorrect -O--CK 001 001 000 - 1578
|
|
188 Command_Timeout -O--CK 100 023 000 - 2353678123603
|
|
189 High_Fly_Writes -O-RCK 100 100 000 - 0
|
|
190 Airflow_Temperature_Cel -O---K 078 047 040 - 22 (Min/Max 21/22)
|
|
191 G-Sense_Error_Rate -O--CK 100 100 000 - 12
|
|
192 Power-Off_Retract_Count -O--CK 100 100 000 - 51
|
|
193 Load_Cycle_Count -O--CK 052 052 000 - 97714
|
|
194 Temperature_Celsius -O---K 022 053 000 - 22 (0 10 0 0 0)
|
|
197 Current_Pending_Sector -O--C- 053 040 000 - 3880
|
|
198 Offline_Uncorrectable ----C- 053 040 000 - 3880
|
|
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 1
|
|
240 Head_Flying_Hours ------ 100 253 000 - 2179 (134 242 0)
|
|
241 Total_LBAs_Written ------ 100 253 000 - 128506691452
|
|
242 Total_LBAs_Read ------ 100 253 000 - 13189884898
|
|
254 Free_Fall_Sensor -O--CK 100 100 000 - 0
|
|
||||||_ K auto-keep
|
|
|||||__ C event count
|
|
||||___ R error rate
|
|
|||____ S speed/performance
|
|
||_____ O updated online
|
|
|______ P prefailure warning
|
|
|
|
General Purpose Log Directory Version 1
|
|
SMART Log Directory Version 1 [multi-sector log support]
|
|
Address Access R/W Size Description
|
|
0x00 GPL,SL R/O 1 Log Directory
|
|
0x01 SL R/O 1 Summary SMART error log
|
|
0x02 SL R/O 5 Comprehensive SMART error log
|
|
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
|
0x04 GPL,SL R/O 8 Device Statistics log
|
|
0x06 SL R/O 1 SMART self-test log
|
|
0x07 GPL R/O 1 Extended self-test log
|
|
0x09 SL R/W 1 Selective self-test log
|
|
0x10 GPL R/O 1 NCQ Command Error log
|
|
0x11 GPL R/O 1 SATA Phy Event Counters log
|
|
0x21 GPL R/O 1 Write stream error log
|
|
0x22 GPL R/O 1 Read stream error log
|
|
0x24 GPL R/O 512 Current Device Internal Status Data log
|
|
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
|
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|
0xa1 GPL,SL VS 24 Device vendor specific log
|
|
0xa2 GPL VS 8160 Device vendor specific log
|
|
0xa8 GPL,SL VS 136 Device vendor specific log
|
|
0xa9 GPL,SL VS 1 Device vendor specific log
|
|
0xab GPL VS 1 Device vendor specific log
|
|
0xb0 GPL VS 8920 Device vendor specific log
|
|
0xbe-0xbf GPL VS 65535 Device vendor specific log
|
|
0xc0 GPL,SL VS 1 Device vendor specific log
|
|
0xc1 GPL,SL VS 16 Device vendor specific log
|
|
0xc2 GPL,SL VS 240 Device vendor specific log
|
|
0xc3 GPL,SL VS 8 Device vendor specific log
|
|
0xc4 GPL,SL VS 24 Device vendor specific log
|
|
0xc9 GPL,SL VS 1 Device vendor specific log
|
|
0xca GPL,SL VS 16 Device vendor specific log
|
|
0xd3 GPL VS 1920 Device vendor specific log
|
|
0xe0 GPL,SL R/W 1 SCT Command/Status
|
|
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
|
|
|
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
|
Device Error Count: 1578 (device log contains only the most recent 20 errors)
|
|
CR = Command Register
|
|
FEATR = Features Register
|
|
COUNT = Count (was: Sector Count) Register
|
|
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
|
LH = LBA High (was: Cylinder High) Register ] LBA
|
|
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
|
LL = LBA Low (was: Sector Number) Register ]
|
|
DV = Device (was: Device/Head) Register
|
|
DC = Device Control Register
|
|
ER = Error register
|
|
ST = Status register
|
|
Powered_Up_Time is measured from power on, and printed as
|
|
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
|
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
|
|
|
Error 1578 [17] log entry is empty
|
|
Error 1577 [16] log entry is empty
|
|
Error 1576 [15] log entry is empty
|
|
Error 1575 [14] log entry is empty
|
|
Error 1574 [13] log entry is empty
|
|
Error 1573 [12] log entry is empty
|
|
Error 1572 [11] log entry is empty
|
|
Error 1571 [10] log entry is empty
|
|
SMART Extended Self-test Log Version: 1 (1 sectors)
|
|
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|
# 1 Short offline Completed: read failure 90% 18352 442016
|
|
|
|
SMART Selective self-test log data structure revision number 1
|
|
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|
1 0 0 Not_testing
|
|
2 0 0 Not_testing
|
|
3 0 0 Not_testing
|
|
4 0 0 Not_testing
|
|
5 0 0 Not_testing
|
|
Selective self-test flags (0x0):
|
|
After scanning selected spans, do NOT read-scan remainder of disk.
|
|
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|
|
|
SCT Status Version: 3
|
|
SCT Version (vendor specific): 522 (0x020a)
|
|
Device State: Active (0)
|
|
Current Temperature: 22 Celsius
|
|
Power Cycle Min/Max Temperature: 21/22 Celsius
|
|
Lifetime Min/Max Temperature: 9/53 Celsius
|
|
Specified Max Operating Temperature: 35 Celsius
|
|
Under/Over Temperature Limit Count: 0/0
|
|
|
|
SCT Temperature History Version: 2
|
|
Temperature Sampling Period: 1 minute
|
|
Temperature Logging Interval: 30 minutes
|
|
Min/Max recommended Temperature: 14/55 Celsius
|
|
Min/Max Temperature Limit: 10/60 Celsius
|
|
Temperature History Size (Index): 128 (73)
|
|
|
|
SCT Error Recovery Control command not supported
|
|
|
|
Device Statistics (GP Log 0x04)
|
|
Page Offset Size Value Flags Description
|
|
0x01 ===== = = === == General Statistics (rev 1) ==
|
|
0x01 0x008 4 265 --- Lifetime Power-On Resets
|
|
0x01 0x010 4 23855 --- Power-on Hours
|
|
0x01 0x018 6 128518956301 --- Logical Sectors Written
|
|
0x01 0x020 6 182831187 --- Number of Write Commands
|
|
0x01 0x028 6 13175589977 --- Logical Sectors Read
|
|
0x01 0x030 6 873210086 --- Number of Read Commands
|
|
0x01 0x038 6 - --- Date and Time TimeStamp
|
|
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
|
|
0x03 0x008 4 20053 --- Spindle Motor Power-on Hours
|
|
0x03 0x010 4 528 --- Head Flying Hours
|
|
0x03 0x018 4 97714 --- Head Load Events
|
|
0x03 0x020 4 38040 --- Number of Reallocated Logical Sectors
|
|
0x03 0x028 4 663 --- Read Recovery Attempts
|
|
0x03 0x030 4 0 --- Number of Mechanical Start Failures
|
|
0x03 0x038 4 3880 --- Number of Realloc. Candidate Logical Sectors
|
|
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
|
0x04 0x008 4 18522 --- Number of Reported Uncorrectable Errors
|
|
0x04 0x010 4 594 --- Resets Between Cmd Acceptance and Completion
|
|
|||_ C monitored condition met
|
|
||__ D supports DSN
|
|
|___ N normalized value
|
|
|
|
Pending Defects log (GP Log 0x0c) not supported
|
|
|
|
SATA Phy Event Counters (GP Log 0x11)
|
|
ID Size Value Description
|
|
0x000a 2 6 Device-to-host register FISes sent due to a COMRESET
|
|
0x0001 2 0 Command failed due to ICRC error
|
|
0x0003 2 0 R_ERR response for device-to-host data FIS
|
|
0x0004 2 0 R_ERR response for host-to-device data FIS
|
|
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
|
|
|
|
|
|