80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Seagate/ST2000/ST2000LX001-1RG174/4776681BEF09
Andrey Ponomarenko a41331e270 Update of reports (new: 14, modified: 3797)
2023-02-14 02:15:20 +03:00

363 lines
19 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-STABLE amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate FireCuda 2.5
Device Model: ST2000LX001-1RG174
Serial Number: --
LU WWN Device Id: 5 000c50 ...
Firmware Version: SDM1
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Jul 12 15:12:05 2021 JST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x79) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 336) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 076 052 006 - 36904240
3 Spin_Up_Time PO---- 099 098 000 - 0
4 Start_Stop_Count -O--CK 096 096 020 - 4285
5 Reallocated_Sector_Ct PO--CK 091 091 036 - 261
7 Seek_Error_Rate POSR-- 090 060 045 - 6793
9 Power_On_Hours -O--CK 081 081 000 - 16988 (161 96 0)
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 100 100 020 - 182
184 End-to-End_Error -O--CK 100 100 099 - 0
187 Reported_Uncorrect -O--CK 014 014 000 - 86
188 Command_Timeout -O--CK 100 096 000 - 94490722334
189 High_Fly_Writes -O-RCK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 064 040 040 Past 36 (Min/Max 26/41)
191 G-Sense_Error_Rate -O--CK 100 100 000 - 15
192 Power-Off_Retract_Count -O--CK 100 100 000 - 34
193 Load_Cycle_Count -O--CK 098 098 000 - 5864
194 Temperature_Celsius -O---K 036 060 000 - 36 (0 11 0 0 0)
197 Current_Pending_Sector -O--C- 098 098 000 - 184
198 Offline_Uncorrectable ----C- 098 098 000 - 184
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
240 Head_Flying_Hours ------ 100 253 000 - 16553h+42m+12.822s
241 Total_LBAs_Written ------ 100 253 000 - 30739779778
242 Total_LBAs_Read ------ 100 253 000 - 24718748069
254 Free_Fall_Sensor -O--CK 100 100 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x24 GPL R/O 512 Current Device Internal Status Data log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 24 Device vendor specific log
0xa2 GPL VS 6920 Device vendor specific log
0xa8 GPL,SL VS 136 Device vendor specific log
0xa9 GPL,SL VS 1 Device vendor specific log
0xab GPL VS 1 Device vendor specific log
0xb0 GPL VS 7680 Device vendor specific log
0xbe-0xbf GPL VS 65535 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL,SL VS 16 Device vendor specific log
0xc2 GPL,SL VS 240 Device vendor specific log
0xc3 GPL,SL VS 8 Device vendor specific log
0xc4 GPL,SL VS 24 Device vendor specific log
0xc9 GPL,SL VS 1 Device vendor specific log
0xca GPL,SL VS 16 Device vendor specific log
0xd3 GPL VS 1920 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 85 (device log contains only the most recent 20 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 85 [4] occurred at disk power-on lifetime: 16983 hours (707 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 a6 81 fb 40 00 00 Error: UNC at LBA = 0xa681fb40 = 2793536320
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 01 00 00 00 a6 81 fb 40 40 00 03:24:56.268 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 00 00 03:24:56.266 READ LOG EXT
60 00 00 01 00 00 00 a6 81 fb 40 40 00 03:24:56.194 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 00 00 03:24:56.193 READ LOG EXT
60 00 00 01 00 00 00 a6 81 fb 40 40 00 03:24:56.123 READ FPDMA QUEUED
Error 84 [3] occurred at disk power-on lifetime: 16983 hours (707 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 a6 81 fb 40 00 00 Error: UNC at LBA = 0xa681fb40 = 2793536320
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 01 00 00 00 a6 81 fb 40 40 00 03:24:56.194 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 00 00 03:24:56.193 READ LOG EXT
60 00 00 01 00 00 00 a6 81 fb 40 40 00 03:24:56.123 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 00 00 03:24:56.122 READ LOG EXT
61 00 00 00 20 00 00 5a 83 6d 20 40 00 03:24:56.018 WRITE FPDMA QUEUED
Error 83 [2] occurred at disk power-on lifetime: 16983 hours (707 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 a6 81 fb 40 00 00 Error: UNC at LBA = 0xa681fb40 = 2793536320
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 01 00 00 00 a6 81 fb 40 40 00 03:24:56.123 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 00 00 03:24:56.122 READ LOG EXT
61 00 00 00 20 00 00 5a 83 6d 20 40 00 03:24:56.018 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 5a 83 6d 00 40 00 03:24:56.018 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 cd 80 24 60 40 00 03:24:56.018 WRITE FPDMA QUEUED
Error 82 [1] occurred at disk power-on lifetime: 16983 hours (707 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 a6 81 fb 40 00 00 Error: WP at LBA = 0xa681fb40 = 2793536320
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 20 00 00 5a 83 6d 20 40 00 03:24:56.018 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 5a 83 6d 00 40 00 03:24:56.018 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 cd 80 24 60 40 00 03:24:56.018 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 9d 02 a6 d8 40 00 03:24:56.016 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 a1 80 c6 70 40 00 03:24:56.016 WRITE FPDMA QUEUED
Error 81 [0] occurred at disk power-on lifetime: 16983 hours (707 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 a6 81 fb 40 00 00 Error: WP at LBA = 0xa681fb40 = 2793536320
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 08 00 00 9d 02 a6 d8 40 00 03:24:55.967 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 a1 80 c6 70 40 00 03:24:55.967 WRITE FPDMA QUEUED
60 00 00 01 00 00 00 a6 82 02 40 40 00 03:24:55.965 READ FPDMA QUEUED
60 00 00 01 00 00 00 a6 82 01 40 40 00 03:24:55.965 READ FPDMA QUEUED
60 00 00 01 00 00 00 a6 82 00 40 40 00 03:24:55.965 READ FPDMA QUEUED
Error 80 [19] occurred at disk power-on lifetime: 16982 hours (707 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 a6 81 fb 40 00 00 Error: UNC at LBA = 0xa681fb40 = 2793536320
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 20 00 00 a6 81 fb 40 e0 00 01:56:16.830 READ DMA EXT
00 00 00 00 00 00 00 00 00 00 00 00 04 01:56:16.756 NOP [Abort queued commands]
25 00 00 00 20 00 00 a6 81 fb 40 e0 00 01:56:16.732 READ DMA EXT
00 00 00 00 00 00 00 00 00 00 00 00 04 01:56:16.661 NOP [Abort queued commands]
25 00 00 00 20 00 00 a6 81 fb 40 e0 00 01:56:16.635 READ DMA EXT
Error 79 [18] occurred at disk power-on lifetime: 16982 hours (707 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 a6 81 fb 40 00 00 Error: UNC at LBA = 0xa681fb40 = 2793536320
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 20 00 00 a6 81 fb 40 e0 00 01:56:16.732 READ DMA EXT
00 00 00 00 00 00 00 00 00 00 00 00 04 01:56:16.661 NOP [Abort queued commands]
25 00 00 00 20 00 00 a6 81 fb 40 e0 00 01:56:16.635 READ DMA EXT
25 00 00 00 20 00 00 a6 81 fd a0 e0 00 01:56:16.632 READ DMA EXT
25 00 00 00 20 00 00 a6 81 fd 80 e0 00 01:56:16.632 READ DMA EXT
Error 78 [17] occurred at disk power-on lifetime: 16982 hours (707 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 a6 81 fb 40 00 00 Error: UNC at LBA = 0xa681fb40 = 2793536320
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 20 00 00 a6 81 fb 40 e0 00 01:56:16.635 READ DMA EXT
25 00 00 00 20 00 00 a6 81 fd a0 e0 00 01:56:16.632 READ DMA EXT
25 00 00 00 20 00 00 a6 81 fd 80 e0 00 01:56:16.632 READ DMA EXT
25 00 00 00 20 00 00 a6 81 fd 60 e0 00 01:56:16.631 READ DMA EXT
25 00 00 00 20 00 00 a6 81 fd 40 e0 00 01:56:16.631 READ DMA EXT
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Aborted by host 90% 9695 -
# 2 Short offline Completed without error 00% 9695 -
# 3 Short offline Completed without error 00% 7683 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
Device State: Active (0)
Current Temperature: 36 Celsius
Power Cycle Min/Max Temperature: 25/42 Celsius
Lifetime Min/Max Temperature: 11/60 Celsius
Specified Max Operating Temperature: 41 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 30 minutes
Min/Max recommended Temperature: 14/55 Celsius
Min/Max Temperature Limit: 10/60 Celsius
Temperature History Size (Index): 128 (44)
SCT Error Recovery Control command not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 182 --- Lifetime Power-On Resets
0x01 0x010 4 16988 --- Power-on Hours
0x01 0x018 6 30742925146 --- Logical Sectors Written
0x01 0x020 6 439600103 --- Number of Write Commands
0x01 0x028 6 24719534515 --- Logical Sectors Read
0x01 0x030 6 279737019 --- Number of Read Commands
0x01 0x038 6 - --- Date and Time TimeStamp
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 16364 --- Spindle Motor Power-on Hours
0x03 0x010 4 15276 --- Head Flying Hours
0x03 0x018 4 5864 --- Head Load Events
0x03 0x020 4 261 --- Number of Reallocated Logical Sectors
0x03 0x028 4 0 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x03 0x038 4 184 --- Number of Realloc. Candidate Logical Sectors
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 399 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 30 --- Resets Between Cmd Acceptance and Completion
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
View Git Blame Copy Permalink