mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
120 lines
6.3 KiB
Plaintext
120 lines
6.3 KiB
Plaintext
smartctl 7.4 2023-08-01 r5530 [OpenBSD 7.4 amd64] (local build)
|
|
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Model Family: Seagate FireCuda 2.5
|
|
Device Model: ST2000LX001-1RG174
|
|
Serial Number: --
|
|
LU WWN Device Id: 5 000c50 ...
|
|
Firmware Version: SDM1
|
|
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
|
|
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
|
Rotation Rate: 5400 rpm
|
|
Form Factor: 2.5 inches
|
|
Device is: In smartctl database 7.3/5528
|
|
ATA Version is: ACS-3 T13/2161-D revision 3b
|
|
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
|
|
Local Time is: Fri Jan 19 16:48:23 2024 -03
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART Status not supported: Incomplete response, ATA output registers missing
|
|
SMART overall-health self-assessment test result: PASSED
|
|
Warning: This result is based on an Attribute check.
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x00) Offline data collection activity
|
|
was never started.
|
|
Auto Offline Data Collection: Disabled.
|
|
Self-test execution status: ( 0) The previous self-test routine completed
|
|
without error or no self-test has ever
|
|
been run.
|
|
Total time to complete Offline
|
|
data collection: ( 0) seconds.
|
|
Offline data collection
|
|
capabilities: (0x71) SMART execute Offline immediate.
|
|
No Auto Offline data collection support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
No Offline surface scan supported.
|
|
Self-test supported.
|
|
Conveyance Self-test supported.
|
|
Selective Self-test supported.
|
|
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
General Purpose Logging supported.
|
|
Short self-test routine
|
|
recommended polling time: ( 1) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 341) minutes.
|
|
Conveyance self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
SCT capabilities: (0x3035) SCT Status supported.
|
|
SCT Feature Control supported.
|
|
SCT Data Table supported.
|
|
|
|
SMART Attributes Data Structure revision number: 10
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
|
1 Raw_Read_Error_Rate 0x000f 077 064 006 Pre-fail Always - 49892413
|
|
3 Spin_Up_Time 0x0003 100 099 000 Pre-fail Always - 0
|
|
4 Start_Stop_Count 0x0032 087 087 020 Old_age Always - 13790
|
|
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
|
|
7 Seek_Error_Rate 0x000f 081 060 045 Pre-fail Always - 116159315
|
|
9 Power_On_Hours 0x0032 064 064 000 Old_age Always - 31847 (152 195 0)
|
|
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
|
|
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 140
|
|
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
|
|
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
|
|
188 Command_Timeout 0x0032 100 099 000 Old_age Always - 11
|
|
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
|
|
190 Airflow_Temperature_Cel 0x0022 070 045 040 Old_age Always - 30 (Min/Max 30/31)
|
|
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 2
|
|
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 21
|
|
193 Load_Cycle_Count 0x0032 093 093 000 Old_age Always - 15471
|
|
194 Temperature_Celsius 0x0022 030 055 000 Old_age Always - 30 (0 14 0 0 0)
|
|
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
|
|
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
|
|
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 1
|
|
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 26844h+33m+51.413s
|
|
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 13530552461
|
|
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 30710463877
|
|
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0
|
|
|
|
SMART Error Log Version: 1
|
|
No Errors Logged
|
|
|
|
SMART Self-test log structure revision number 1
|
|
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|
# 1 Short offline Aborted by host 70% 4277 -
|
|
# 2 Short offline Aborted by host 90% 4277 -
|
|
# 3 Short offline Aborted by host 90% 3342 -
|
|
# 4 Short offline Aborted by host 90% 3337 -
|
|
# 5 Short offline Aborted by host 80% 3337 -
|
|
# 6 Short offline Completed without error 00% 3019 -
|
|
# 7 Short offline Completed without error 00% 2326 -
|
|
# 8 Short offline Completed without error 00% 2039 -
|
|
# 9 Short offline Completed without error 00% 1798 -
|
|
#10 Short offline Completed without error 00% 1317 -
|
|
#11 Short offline Completed without error 00% 1253 -
|
|
#12 Short offline Completed without error 00% 596 -
|
|
|
|
SMART Selective self-test log data structure revision number 1
|
|
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|
1 0 0 Not_testing
|
|
2 0 0 Not_testing
|
|
3 0 0 Not_testing
|
|
4 0 0 Not_testing
|
|
5 0 0 Not_testing
|
|
Selective self-test flags (0x0):
|
|
After scanning selected spans, do NOT read-scan remainder of disk.
|
|
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|
|
|
The above only provides legacy SMART information - try 'smartctl -x' for more
|
|
|
|
|
|
|