mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
197 lines
9.3 KiB
Plaintext
197 lines
9.3 KiB
Plaintext
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p4 amd64] (local build)
|
|
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Model Family: Seagate Constellation ES.3
|
|
Device Model: ST2000NM0033-9ZM175
|
|
Serial Number: --
|
|
LU WWN Device Id: 5 000c50 ...
|
|
Firmware Version: SN03
|
|
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
|
|
Sector Size: 512 bytes logical/physical
|
|
Rotation Rate: 7200 rpm
|
|
Form Factor: 3.5 inches
|
|
Device is: In smartctl database [for details use: -P show]
|
|
ATA Version is: ACS-2 (minor revision not indicated)
|
|
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
|
|
Local Time is: Sat May 8 23:39:43 2021 UTC
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
AAM feature is: Unavailable
|
|
APM feature is: Unavailable
|
|
Rd look-ahead is: Enabled
|
|
Write cache is: Enabled
|
|
DSN feature is: Unavailable
|
|
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
|
Wt Cache Reorder: Enabled
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART overall-health self-assessment test result: PASSED
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x82) Offline data collection activity
|
|
was completed without error.
|
|
Auto Offline Data Collection: Enabled.
|
|
Self-test execution status: ( 0) The previous self-test routine completed
|
|
without error or no self-test has ever
|
|
been run.
|
|
Total time to complete Offline
|
|
data collection: ( 592) seconds.
|
|
Offline data collection
|
|
capabilities: (0x7b) SMART execute Offline immediate.
|
|
Auto Offline data collection on/off support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
Offline surface scan supported.
|
|
Self-test supported.
|
|
Conveyance Self-test supported.
|
|
Selective Self-test supported.
|
|
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
General Purpose Logging supported.
|
|
Short self-test routine
|
|
recommended polling time: ( 1) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 254) minutes.
|
|
Conveyance self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
SCT capabilities: (0x50bd) SCT Status supported.
|
|
SCT Error Recovery Control supported.
|
|
SCT Feature Control supported.
|
|
SCT Data Table supported.
|
|
|
|
SMART Attributes Data Structure revision number: 10
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|
1 Raw_Read_Error_Rate POSR-- 081 063 044 - 160218649
|
|
3 Spin_Up_Time PO---- 096 095 000 - 0
|
|
4 Start_Stop_Count -O--CK 100 100 020 - 41
|
|
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
|
|
7 Seek_Error_Rate POSR-- 091 060 030 - 1382816084
|
|
9 Power_On_Hours -O--CK 033 033 000 - 59137
|
|
10 Spin_Retry_Count PO--C- 100 100 097 - 0
|
|
12 Power_Cycle_Count -O--CK 100 100 020 - 40
|
|
184 End-to-End_Error -O--CK 100 100 099 - 0
|
|
187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
|
188 Command_Timeout -O--CK 100 099 000 - 2
|
|
189 High_Fly_Writes -O-RCK 100 100 000 - 0
|
|
190 Airflow_Temperature_Cel -O---K 069 054 045 - 31 (Min/Max 24/36)
|
|
191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
|
|
192 Power-Off_Retract_Count -O--CK 100 100 000 - 34
|
|
193 Load_Cycle_Count -O--CK 099 099 000 - 2576
|
|
194 Temperature_Celsius -O---K 031 046 000 - 31 (0 21 0 0 0)
|
|
195 Hardware_ECC_Recovered -O-RC- 042 004 000 - 160218649
|
|
197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
|
198 Offline_Uncorrectable ----C- 100 100 000 - 0
|
|
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 2
|
|
||||||_ K auto-keep
|
|
|||||__ C event count
|
|
||||___ R error rate
|
|
|||____ S speed/performance
|
|
||_____ O updated online
|
|
|______ P prefailure warning
|
|
|
|
General Purpose Log Directory Version 1
|
|
SMART Log Directory Version 1 [multi-sector log support]
|
|
Address Access R/W Size Description
|
|
0x00 GPL,SL R/O 1 Log Directory
|
|
0x01 SL R/O 1 Summary SMART error log
|
|
0x02 SL R/O 5 Comprehensive SMART error log
|
|
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
|
0x06 SL R/O 1 SMART self-test log
|
|
0x07 GPL R/O 1 Extended self-test log
|
|
0x08 GPL,SL R/O 2 Power Conditions log
|
|
0x09 SL R/W 1 Selective self-test log
|
|
0x10 GPL R/O 1 NCQ Command Error log
|
|
0x11 GPL R/O 1 SATA Phy Event Counters log
|
|
0x21 GPL R/O 1 Write stream error log
|
|
0x22 GPL R/O 1 Read stream error log
|
|
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
|
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|
0xa1 GPL,SL VS 20 Device vendor specific log
|
|
0xa2 GPL VS 4496 Device vendor specific log
|
|
0xa8 GPL,SL VS 129 Device vendor specific log
|
|
0xa9 GPL,SL VS 1 Device vendor specific log
|
|
0xb0 GPL VS 5176 Device vendor specific log
|
|
0xbd GPL VS 512 Device vendor specific log
|
|
0xbe-0xbf GPL VS 65535 Device vendor specific log
|
|
0xc1 GPL,SL VS 10 Device vendor specific log
|
|
0xc2 GPL,SL VS 50 Device vendor specific log
|
|
0xc3 GPL,SL VS 8 Device vendor specific log
|
|
0xc4 GPL,SL VS 5 Device vendor specific log
|
|
0xe0 GPL,SL R/W 1 SCT Command/Status
|
|
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
|
|
|
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
|
No Errors Logged
|
|
|
|
SMART Extended Self-test Log Version: 1 (1 sectors)
|
|
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|
# 1 Extended offline Completed without error 00% 59121 -
|
|
# 2 Short offline Completed without error 00% 59115 -
|
|
# 3 Short offline Completed without error 00% 59091 -
|
|
# 4 Short offline Completed without error 00% 59067 -
|
|
# 5 Short offline Completed without error 00% 59043 -
|
|
# 6 Short offline Completed without error 00% 59019 -
|
|
# 7 Short offline Completed without error 00% 58995 -
|
|
# 8 Short offline Completed without error 00% 58971 -
|
|
# 9 Extended offline Completed without error 00% 58953 -
|
|
#10 Short offline Completed without error 00% 58947 -
|
|
#11 Short offline Completed without error 00% 58923 -
|
|
#12 Short offline Completed without error 00% 58899 -
|
|
#13 Short offline Completed without error 00% 58875 -
|
|
#14 Short offline Completed without error 00% 58851 -
|
|
#15 Short offline Completed without error 00% 58827 -
|
|
#16 Short offline Completed without error 00% 58803 -
|
|
#17 Extended offline Completed without error 00% 58785 -
|
|
#18 Short offline Completed without error 00% 58779 -
|
|
#19 Short offline Completed without error 00% 58755 -
|
|
|
|
SMART Selective self-test log data structure revision number 1
|
|
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|
1 0 0 Not_testing
|
|
2 0 0 Not_testing
|
|
3 0 0 Not_testing
|
|
4 0 0 Not_testing
|
|
5 0 0 Not_testing
|
|
Selective self-test flags (0x0):
|
|
After scanning selected spans, do NOT read-scan remainder of disk.
|
|
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|
|
|
SCT Status Version: 3
|
|
SCT Version (vendor specific): 522 (0x020a)
|
|
Device State: Active (0)
|
|
Current Temperature: 31 Celsius
|
|
Power Cycle Min/Max Temperature: 24/36 Celsius
|
|
Lifetime Min/Max Temperature: 21/46 Celsius
|
|
Under/Over Temperature Limit Count: 0/58456
|
|
|
|
SCT Temperature History Version: 2
|
|
Temperature Sampling Period: 1 minute
|
|
Temperature Logging Interval: 10 minutes
|
|
Min/Max recommended Temperature: 0/ 0 Celsius
|
|
Min/Max Temperature Limit: 0/ 0 Celsius
|
|
Temperature History Size (Index): 128 (108)
|
|
|
|
SCT Error Recovery Control:
|
|
Read: 100 (10.0 seconds)
|
|
Write: 100 (10.0 seconds)
|
|
|
|
Device Statistics (GP/SMART Log 0x04) not supported
|
|
|
|
Pending Defects log (GP Log 0x0c) not supported
|
|
|
|
SATA Phy Event Counters (GP Log 0x11)
|
|
ID Size Value Description
|
|
0x000a 2 54 Device-to-host register FISes sent due to a COMRESET
|
|
0x0001 2 0 Command failed due to ICRC error
|
|
0x0003 2 0 R_ERR response for device-to-host data FIS
|
|
0x0004 2 0 R_ERR response for host-to-device data FIS
|
|
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
|
|
|
|
|
|