mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
319 lines
16 KiB
Plaintext
319 lines
16 KiB
Plaintext
smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build)
|
|
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Model Family: Seagate Barracuda 3.5
|
|
Device Model: ST3000DM008-2DM166
|
|
Serial Number: --
|
|
LU WWN Device Id: 5 000c50 ...
|
|
Firmware Version: CC26
|
|
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
|
|
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
|
Rotation Rate: 7200 rpm
|
|
Form Factor: 3.5 inches
|
|
Device is: In smartctl database [for details use: -P show]
|
|
ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
|
|
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
|
Local Time is: Thu Feb 18 00:48:16 2021 PST
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
AAM feature is: Unavailable
|
|
APM level is: 128 (minimum power consumption without standby)
|
|
Rd look-ahead is: Enabled
|
|
Write cache is: Enabled
|
|
DSN feature is: Unavailable
|
|
ATA Security is: Disabled, frozen [SEC2]
|
|
Wt Cache Reorder: Unavailable
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART overall-health self-assessment test result: PASSED
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x00) Offline data collection activity
|
|
was never started.
|
|
Auto Offline Data Collection: Disabled.
|
|
Self-test execution status: ( 0) The previous self-test routine completed
|
|
without error or no self-test has ever
|
|
been run.
|
|
Total time to complete Offline
|
|
data collection: ( 80) seconds.
|
|
Offline data collection
|
|
capabilities: (0x73) SMART execute Offline immediate.
|
|
Auto Offline data collection on/off support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
No Offline surface scan supported.
|
|
Self-test supported.
|
|
Conveyance Self-test supported.
|
|
Selective Self-test supported.
|
|
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
General Purpose Logging supported.
|
|
Short self-test routine
|
|
recommended polling time: ( 1) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 306) minutes.
|
|
Conveyance self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
SCT capabilities: (0x1085) SCT Status supported.
|
|
|
|
SMART Attributes Data Structure revision number: 10
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|
1 Raw_Read_Error_Rate POSR-- 119 087 006 - 232630944
|
|
3 Spin_Up_Time PO---- 095 093 000 - 0
|
|
4 Start_Stop_Count -O--CK 100 100 020 - 54
|
|
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
|
|
7 Seek_Error_Rate POSR-- 076 060 030 - 48544880
|
|
9 Power_On_Hours -O--CK 060 060 000 - 35566
|
|
10 Spin_Retry_Count PO--C- 100 100 097 - 0
|
|
12 Power_Cycle_Count -O--CK 100 100 020 - 54
|
|
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
|
|
184 End-to-End_Error -O--CK 100 100 099 - 0
|
|
187 Reported_Uncorrect -O--CK 001 001 000 - 686
|
|
188 Command_Timeout -O--CK 100 098 000 - 0 0 7
|
|
189 High_Fly_Writes -O-RCK 089 089 000 - 11
|
|
190 Airflow_Temperature_Cel -O---K 071 059 045 - 29 (Min/Max 28/29)
|
|
191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
|
|
192 Power-Off_Retract_Count -O--CK 100 100 000 - 10
|
|
193 Load_Cycle_Count -O--CK 046 046 000 - 109329
|
|
194 Temperature_Celsius -O---K 029 041 000 - 29 (0 19 0 0 0)
|
|
197 Current_Pending_Sector -O--C- 099 093 000 - 312
|
|
198 Offline_Uncorrectable ----C- 099 093 000 - 312
|
|
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
|
|
240 Head_Flying_Hours ------ 100 253 000 - 2292h+25m+35.214s
|
|
241 Total_LBAs_Written ------ 100 253 000 - 20526981048
|
|
242 Total_LBAs_Read ------ 100 253 000 - 1735817081263
|
|
||||||_ K auto-keep
|
|
|||||__ C event count
|
|
||||___ R error rate
|
|
|||____ S speed/performance
|
|
||_____ O updated online
|
|
|______ P prefailure warning
|
|
|
|
General Purpose Log Directory Version 1
|
|
SMART Log Directory Version 1 [multi-sector log support]
|
|
Address Access R/W Size Description
|
|
0x00 GPL,SL R/O 1 Log Directory
|
|
0x01 SL R/O 1 Summary SMART error log
|
|
0x02 SL R/O 5 Comprehensive SMART error log
|
|
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
|
0x06 SL R/O 1 SMART self-test log
|
|
0x07 GPL R/O 1 Extended self-test log
|
|
0x09 SL R/W 1 Selective self-test log
|
|
0x10 GPL R/O 1 NCQ Command Error log
|
|
0x11 GPL R/O 1 SATA Phy Event Counters log
|
|
0x21 GPL R/O 1 Write stream error log
|
|
0x22 GPL R/O 1 Read stream error log
|
|
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
|
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|
0xa1 GPL,SL VS 20 Device vendor specific log
|
|
0xa2 GPL VS 4496 Device vendor specific log
|
|
0xa8 GPL,SL VS 129 Device vendor specific log
|
|
0xa9 GPL,SL VS 1 Device vendor specific log
|
|
0xab GPL VS 1 Device vendor specific log
|
|
0xb0 GPL VS 5176 Device vendor specific log
|
|
0xbe-0xbf GPL VS 65535 Device vendor specific log
|
|
0xc0 GPL,SL VS 1 Device vendor specific log
|
|
0xc1 GPL,SL VS 10 Device vendor specific log
|
|
0xc3 GPL,SL VS 8 Device vendor specific log
|
|
0xe0 GPL,SL R/W 1 SCT Command/Status
|
|
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
|
|
|
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
|
Device Error Count: 686 (device log contains only the most recent 20 errors)
|
|
CR = Command Register
|
|
FEATR = Features Register
|
|
COUNT = Count (was: Sector Count) Register
|
|
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
|
LH = LBA High (was: Cylinder High) Register ] LBA
|
|
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
|
LL = LBA Low (was: Sector Number) Register ]
|
|
DV = Device (was: Device/Head) Register
|
|
DC = Device Control Register
|
|
ER = Error register
|
|
ST = Status register
|
|
Powered_Up_Time is measured from power on, and printed as
|
|
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
|
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
|
|
|
Error 686 [5] occurred at disk power-on lifetime: 33081 hours (1378 days + 9 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
|
-- -- -- == -- == == == -- -- -- -- --
|
|
40 -- 51 00 00 00 00 f4 8c 8d 60 00 00 Error: UNC at LBA = 0xf48c8d60 = 4102851936
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
|
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
|
60 00 00 01 00 00 00 f4 8c 95 88 40 00 05:59:52.506 READ FPDMA QUEUED
|
|
60 00 00 01 00 00 00 f4 8c 94 88 40 00 05:59:52.506 READ FPDMA QUEUED
|
|
60 00 00 01 00 00 00 f4 8c 93 88 40 00 05:59:52.506 READ FPDMA QUEUED
|
|
60 00 00 01 00 00 00 f4 8c 92 88 40 00 05:59:52.506 READ FPDMA QUEUED
|
|
60 00 00 01 00 00 00 f4 8c 91 88 40 00 05:59:52.506 READ FPDMA QUEUED
|
|
|
|
Error 685 [4] occurred at disk power-on lifetime: 33081 hours (1378 days + 9 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
|
-- -- -- == -- == == == -- -- -- -- --
|
|
40 -- 51 00 00 00 00 f4 8c 8d 60 00 00 Error: UNC at LBA = 0xf48c8d60 = 4102851936
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
|
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
|
60 00 00 01 00 00 00 f4 8c 95 88 40 00 05:59:48.893 READ FPDMA QUEUED
|
|
60 00 00 01 00 00 00 f4 8c 94 88 40 00 05:59:48.893 READ FPDMA QUEUED
|
|
60 00 00 01 00 00 00 f4 8c 93 88 40 00 05:59:48.893 READ FPDMA QUEUED
|
|
60 00 00 01 00 00 00 f4 8c 92 88 40 00 05:59:48.893 READ FPDMA QUEUED
|
|
60 00 00 01 00 00 00 f4 8c 91 88 40 00 05:59:48.893 READ FPDMA QUEUED
|
|
|
|
Error 684 [3] occurred at disk power-on lifetime: 33081 hours (1378 days + 9 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
|
-- -- -- == -- == == == -- -- -- -- --
|
|
40 -- 51 00 00 00 00 f4 8c 8d 60 00 00 Error: UNC at LBA = 0xf48c8d60 = 4102851936
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
|
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
|
60 00 00 01 00 00 00 f4 8c 95 88 40 00 05:59:45.263 READ FPDMA QUEUED
|
|
60 00 00 01 00 00 00 f4 8c 94 88 40 00 05:59:45.263 READ FPDMA QUEUED
|
|
60 00 00 01 00 00 00 f4 8c 93 88 40 00 05:59:45.263 READ FPDMA QUEUED
|
|
60 00 00 01 00 00 00 f4 8c 92 88 40 00 05:59:45.263 READ FPDMA QUEUED
|
|
60 00 00 01 00 00 00 f4 8c 91 88 40 00 05:59:45.263 READ FPDMA QUEUED
|
|
|
|
Error 683 [2] occurred at disk power-on lifetime: 33081 hours (1378 days + 9 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
|
-- -- -- == -- == == == -- -- -- -- --
|
|
40 -- 51 00 00 00 00 f4 8c 8d 60 00 00 Error: UNC at LBA = 0xf48c8d60 = 4102851936
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
|
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
|
60 00 00 01 00 00 00 f4 8c 95 88 40 00 05:59:41.667 READ FPDMA QUEUED
|
|
60 00 00 01 00 00 00 f4 8c 94 88 40 00 05:59:41.667 READ FPDMA QUEUED
|
|
60 00 00 01 00 00 00 f4 8c 93 88 40 00 05:59:41.667 READ FPDMA QUEUED
|
|
60 00 00 01 00 00 00 f4 8c 92 88 40 00 05:59:41.667 READ FPDMA QUEUED
|
|
60 00 00 01 00 00 00 f4 8c 91 88 40 00 05:59:41.667 READ FPDMA QUEUED
|
|
|
|
Error 682 [1] occurred at disk power-on lifetime: 33081 hours (1378 days + 9 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
|
-- -- -- == -- == == == -- -- -- -- --
|
|
40 -- 51 00 00 00 00 f4 8c 8d 60 00 00 Error: UNC at LBA = 0xf48c8d60 = 4102851936
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
|
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
|
60 00 00 01 00 00 00 f4 8c 95 88 40 00 05:59:36.405 READ FPDMA QUEUED
|
|
60 00 00 01 00 00 00 f4 8c 94 88 40 00 05:59:36.405 READ FPDMA QUEUED
|
|
60 00 00 01 00 00 00 f4 8c 93 88 40 00 05:59:36.405 READ FPDMA QUEUED
|
|
60 00 00 01 00 00 00 f4 8c 92 88 40 00 05:59:36.405 READ FPDMA QUEUED
|
|
60 00 00 01 00 00 00 f4 8c 91 88 40 00 05:59:36.405 READ FPDMA QUEUED
|
|
|
|
Error 681 [0] occurred at disk power-on lifetime: 33080 hours (1378 days + 8 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
|
-- -- -- == -- == == == -- -- -- -- --
|
|
40 -- 51 00 00 00 00 10 51 ae 50 00 00 Error: UNC at LBA = 0x1051ae50 = 273788496
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
|
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
|
60 00 00 00 40 00 00 10 51 b5 08 40 00 05:10:23.965 READ FPDMA QUEUED
|
|
60 00 00 00 d8 00 00 10 51 b4 30 40 00 05:10:23.965 READ FPDMA QUEUED
|
|
60 00 00 01 00 00 00 10 51 b3 30 40 00 05:10:23.965 READ FPDMA QUEUED
|
|
60 00 00 01 00 00 00 10 51 b2 30 40 00 05:10:23.965 READ FPDMA QUEUED
|
|
60 00 00 01 00 00 00 10 51 b1 30 40 00 05:10:23.965 READ FPDMA QUEUED
|
|
|
|
Error 680 [19] occurred at disk power-on lifetime: 33080 hours (1378 days + 8 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
|
-- -- -- == -- == == == -- -- -- -- --
|
|
40 -- 51 00 00 00 00 10 51 ae 50 00 00 Error: UNC at LBA = 0x1051ae50 = 273788496
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
|
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
|
60 00 00 00 40 00 00 10 51 b5 08 40 00 05:10:20.335 READ FPDMA QUEUED
|
|
60 00 00 00 d8 00 00 10 51 b4 30 40 00 05:10:20.335 READ FPDMA QUEUED
|
|
60 00 00 01 00 00 00 10 51 b3 30 40 00 05:10:20.335 READ FPDMA QUEUED
|
|
60 00 00 01 00 00 00 10 51 b2 30 40 00 05:10:20.335 READ FPDMA QUEUED
|
|
60 00 00 01 00 00 00 10 51 b1 30 40 00 05:10:20.335 READ FPDMA QUEUED
|
|
|
|
Error 679 [18] occurred at disk power-on lifetime: 33080 hours (1378 days + 8 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
|
-- -- -- == -- == == == -- -- -- -- --
|
|
40 -- 51 00 00 00 00 10 51 ae 50 00 00 Error: UNC at LBA = 0x1051ae50 = 273788496
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
|
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
|
60 00 00 00 40 00 00 10 51 b5 08 40 00 05:10:16.697 READ FPDMA QUEUED
|
|
60 00 00 00 d8 00 00 10 51 b4 30 40 00 05:10:16.697 READ FPDMA QUEUED
|
|
60 00 00 01 00 00 00 10 51 b3 30 40 00 05:10:16.697 READ FPDMA QUEUED
|
|
60 00 00 01 00 00 00 10 51 b2 30 40 00 05:10:16.697 READ FPDMA QUEUED
|
|
60 00 00 01 00 00 00 10 51 b1 30 40 00 05:10:16.697 READ FPDMA QUEUED
|
|
|
|
SMART Extended Self-test Log Version: 1 (1 sectors)
|
|
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
|
|
|
SMART Selective self-test log data structure revision number 1
|
|
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|
1 0 0 Not_testing
|
|
2 0 0 Not_testing
|
|
3 0 0 Not_testing
|
|
4 0 0 Not_testing
|
|
5 0 0 Not_testing
|
|
Selective self-test flags (0x0):
|
|
After scanning selected spans, do NOT read-scan remainder of disk.
|
|
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|
|
|
SCT Status Version: 3
|
|
SCT Version (vendor specific): 522 (0x020a)
|
|
Device State: Active (0)
|
|
Current Temperature: 30 Celsius
|
|
Power Cycle Min/Max Temperature: 28/32 Celsius
|
|
Lifetime Min/Max Temperature: 19/41 Celsius
|
|
Under/Over Temperature Limit Count: 0/0
|
|
|
|
SCT Data Table command not supported
|
|
|
|
SCT Error Recovery Control command not supported
|
|
|
|
Device Statistics (GP/SMART Log 0x04) not supported
|
|
|
|
Pending Defects log (GP Log 0x0c) not supported
|
|
|
|
SATA Phy Event Counters (GP Log 0x11)
|
|
ID Size Value Description
|
|
0x000a 2 5 Device-to-host register FISes sent due to a COMRESET
|
|
0x0001 2 0 Command failed due to ICRC error
|
|
0x0003 2 0 R_ERR response for device-to-host data FIS
|
|
0x0004 2 0 R_ERR response for host-to-device data FIS
|
|
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
|
|
|
|
|
|