mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
200 lines
8.5 KiB
Plaintext
200 lines
8.5 KiB
Plaintext
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p5 amd64] (local build)
|
|
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Model Family: Seagate U10
|
|
Device Model: ST310212A
|
|
Serial Number: --
|
|
Firmware Version: 3.02
|
|
User Capacity: 10,242,892,800 bytes [10.2 GB]
|
|
Sector Size: 512 bytes logical/physical
|
|
Device is: In smartctl database 7.3/5319
|
|
ATA Version is: ATA/ATAPI-5 (minor revision not indicated)
|
|
Local Time is: Wed Feb 22 18:14:44 2023 -03
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
AAM feature is: Unavailable
|
|
APM level is: 64 (intermediate level with standby)
|
|
Rd look-ahead is: Enabled
|
|
Write cache is: Enabled
|
|
DSN feature is: Unavailable
|
|
ATA Security is: Unavailable
|
|
Wt Cache Reorder: Unavailable
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART overall-health self-assessment test result: PASSED
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x82) Offline data collection activity
|
|
was completed without error.
|
|
Auto Offline Data Collection: Enabled.
|
|
Self-test execution status: ( 0) The previous self-test routine completed
|
|
without error or no self-test has ever
|
|
been run.
|
|
Total time to complete Offline
|
|
data collection: ( 2400) seconds.
|
|
Offline data collection
|
|
capabilities: (0x1d) SMART execute Offline immediate.
|
|
No Auto Offline data collection support.
|
|
Abort Offline collection upon new
|
|
command.
|
|
Offline surface scan supported.
|
|
Self-test supported.
|
|
No Conveyance Self-test supported.
|
|
No Selective Self-test supported.
|
|
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
No General Purpose Logging support.
|
|
Short self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 14) minutes.
|
|
|
|
SMART Attributes Data Structure revision number: 16
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|
1 Raw_Read_Error_Rate ---R-- 082 082 000 - 231736924
|
|
3 Spin_Up_Time -OS--- 098 098 000 - 0
|
|
4 Start_Stop_Count PO--C- 100 100 020 - 685
|
|
5 Reallocated_Sector_Ct PO--C- 100 100 036 - 24
|
|
7 Seek_Error_Rate P--R-- 068 060 030 - 38711262534
|
|
9 Power_On_Hours -O--C- 084 084 000 - 14648
|
|
10 Spin_Retry_Count PO--C- 100 099 090 - 0
|
|
12 Power_Cycle_Count PO--C- 098 098 000 - 2128
|
|
197 Current_Pending_Sector ----CK 100 100 000 - 0
|
|
198 Offline_Uncorrectable ----CK 100 100 000 - 0
|
|
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0
|
|
||||||_ K auto-keep
|
|
|||||__ C event count
|
|
||||___ R error rate
|
|
|||____ S speed/performance
|
|
||_____ O updated online
|
|
|______ P prefailure warning
|
|
|
|
General Purpose Log Directory not supported
|
|
|
|
SMART Log Directory Version 0
|
|
Address Access R/W Size Description
|
|
0x00 SL R/O 1 Log Directory
|
|
|
|
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
|
|
|
|
SMART Error Log Version: 1
|
|
ATA Error Count: 38 (device log contains only the most recent five errors)
|
|
CR = Command Register [HEX]
|
|
FR = Features Register [HEX]
|
|
SC = Sector Count Register [HEX]
|
|
SN = Sector Number Register [HEX]
|
|
CL = Cylinder Low Register [HEX]
|
|
CH = Cylinder High Register [HEX]
|
|
DH = Device/Head Register [HEX]
|
|
DC = Device Command Register [HEX]
|
|
ER = Error register [HEX]
|
|
ST = Status register [HEX]
|
|
Powered_Up_Time is measured from power on, and printed as
|
|
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
|
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
|
|
|
Error 38 occurred at disk power-on lifetime: 493 hours (20 days + 13 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER ST SC SN CL CH DH
|
|
-- -- -- -- -- -- --
|
|
40 51 7c 93 c3 28 e1 Error: UNC at LBA = 0x0128c393 = 19448723
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|
-- -- -- -- -- -- -- -- ---------------- --------------------
|
|
40 00 70 9f c3 28 e1 00 00:11:44.148 READ VERIFY SECTOR(S)
|
|
40 00 50 bf c3 28 e1 00 00:11:26.052 READ VERIFY SECTOR(S)
|
|
40 00 d0 3f c2 28 e1 00 00:11:18.761 READ VERIFY SECTOR(S)
|
|
40 00 d0 3f c1 28 e1 00 00:11:18.754 READ VERIFY SECTOR(S)
|
|
40 00 d0 3f c0 28 e1 00 00:11:18.744 READ VERIFY SECTOR(S)
|
|
|
|
Error 37 occurred at disk power-on lifetime: 493 hours (20 days + 13 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER ST SC SN CL CH DH
|
|
-- -- -- -- -- -- --
|
|
40 51 7c 93 c3 28 e1 Error: UNC at LBA = 0x0128c393 = 19448723
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|
-- -- -- -- -- -- -- -- ---------------- --------------------
|
|
40 00 70 9f c3 28 e1 00 00:11:44.148 READ VERIFY SECTOR(S)
|
|
40 00 50 bf c3 28 e1 00 00:11:26.052 READ VERIFY SECTOR(S)
|
|
40 00 d0 3f c2 28 e1 00 00:11:18.761 READ VERIFY SECTOR(S)
|
|
40 00 d0 3f c1 28 e1 00 00:11:18.754 READ VERIFY SECTOR(S)
|
|
40 00 d0 3f c0 28 e1 00 00:11:18.744 READ VERIFY SECTOR(S)
|
|
|
|
Error 36 occurred at disk power-on lifetime: 493 hours (20 days + 13 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER ST SC SN CL CH DH
|
|
-- -- -- -- -- -- --
|
|
40 51 7c 93 c3 28 e1 Error: UNC at LBA = 0x0128c393 = 19448723
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|
-- -- -- -- -- -- -- -- ---------------- --------------------
|
|
40 00 70 9f c3 28 e1 00 00:11:44.148 READ VERIFY SECTOR(S)
|
|
40 00 50 bf c3 28 e1 00 00:11:26.052 READ VERIFY SECTOR(S)
|
|
40 00 d0 3f c2 28 e1 00 00:11:18.761 READ VERIFY SECTOR(S)
|
|
40 00 d0 3f c1 28 e1 00 00:11:18.754 READ VERIFY SECTOR(S)
|
|
40 00 d0 3f c0 28 e1 00 00:11:18.744 READ VERIFY SECTOR(S)
|
|
|
|
Error 35 occurred at disk power-on lifetime: 493 hours (20 days + 13 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER ST SC SN CL CH DH
|
|
-- -- -- -- -- -- --
|
|
40 51 7c 93 c3 28 e1 Error: UNC at LBA = 0x0128c393 = 19448723
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|
-- -- -- -- -- -- -- -- ---------------- --------------------
|
|
40 00 70 9f c3 28 e1 00 00:11:44.148 READ VERIFY SECTOR(S)
|
|
40 00 50 bf c3 28 e1 00 00:11:26.052 READ VERIFY SECTOR(S)
|
|
40 00 d0 3f c2 28 e1 00 00:11:18.761 READ VERIFY SECTOR(S)
|
|
40 00 d0 3f c1 28 e1 00 00:11:18.754 READ VERIFY SECTOR(S)
|
|
40 00 d0 3f c0 28 e1 00 00:11:18.744 READ VERIFY SECTOR(S)
|
|
|
|
Error 34 occurred at disk power-on lifetime: 493 hours (20 days + 13 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER ST SC SN CL CH DH
|
|
-- -- -- -- -- -- --
|
|
40 51 7c 93 c3 28 e1 Error: UNC at LBA = 0x0128c393 = 19448723
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|
-- -- -- -- -- -- -- -- ---------------- --------------------
|
|
40 00 70 9f c3 28 e1 00 00:11:44.148 READ VERIFY SECTOR(S)
|
|
40 00 50 bf c3 28 e1 00 00:11:26.052 READ VERIFY SECTOR(S)
|
|
40 00 d0 3f c2 28 e1 00 00:11:18.761 READ VERIFY SECTOR(S)
|
|
40 00 d0 3f c1 28 e1 00 00:11:18.754 READ VERIFY SECTOR(S)
|
|
40 00 d0 3f c0 28 e1 00 00:11:18.744 READ VERIFY SECTOR(S)
|
|
|
|
SMART Extended Self-test Log (GP Log 0x07) not supported
|
|
|
|
SMART Self-test log structure revision number 1
|
|
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
|
|
|
Selective Self-tests/Logging not supported
|
|
|
|
SCT Commands not supported
|
|
|
|
Device Statistics (GP/SMART Log 0x04) not supported
|
|
|
|
Pending Defects log (GP Log 0x0c) not supported
|
|
|
|
SATA Phy Event Counters (GP Log 0x11) not supported
|
|
|