mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
233 lines
10 KiB
Plaintext
233 lines
10 KiB
Plaintext
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p5 amd64] (local build)
|
|
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus
|
|
Device Model: ST3160827AS
|
|
Serial Number: --
|
|
Firmware Version: 3.42
|
|
User Capacity: 160,041,885,696 bytes [160 GB]
|
|
Sector Size: 512 bytes logical/physical
|
|
Device is: In smartctl database 7.3/5319
|
|
ATA Version is: ATA/ATAPI-6 T13/1410D revision 2
|
|
Local Time is: Fri Jul 28 20:24:21 2023 SAST
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
AAM feature is: Unavailable
|
|
APM feature is: Unavailable
|
|
Rd look-ahead is: Enabled
|
|
Write cache is: Enabled
|
|
DSN feature is: Unavailable
|
|
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
|
Wt Cache Reorder: Unavailable
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART overall-health self-assessment test result: PASSED
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x82) Offline data collection activity
|
|
was completed without error.
|
|
Auto Offline Data Collection: Enabled.
|
|
Self-test execution status: ( 0) The previous self-test routine completed
|
|
without error or no self-test has ever
|
|
been run.
|
|
Total time to complete Offline
|
|
data collection: ( 430) seconds.
|
|
Offline data collection
|
|
capabilities: (0x5b) SMART execute Offline immediate.
|
|
Auto Offline data collection on/off support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
Offline surface scan supported.
|
|
Self-test supported.
|
|
No Conveyance Self-test supported.
|
|
Selective Self-test supported.
|
|
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
No General Purpose Logging support.
|
|
Short self-test routine
|
|
recommended polling time: ( 1) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 94) minutes.
|
|
|
|
SMART Attributes Data Structure revision number: 10
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|
1 Raw_Read_Error_Rate POSR-- 054 047 006 - 61488271
|
|
3 Spin_Up_Time PO---- 097 096 000 - 0
|
|
4 Start_Stop_Count -O--CK 098 098 020 - 2842
|
|
5 Reallocated_Sector_Ct PO--CK 099 099 036 - 58
|
|
7 Seek_Error_Rate POSR-- 088 060 030 - 784490145
|
|
9 Power_On_Hours -O--CK 046 046 000 - 48138
|
|
10 Spin_Retry_Count PO--C- 100 100 097 - 0
|
|
12 Power_Cycle_Count -O--CK 098 098 020 - 2364
|
|
194 Temperature_Celsius -O---K 043 056 000 - 43 (0 6 0 0 0)
|
|
195 Hardware_ECC_Recovered -O-RC- 054 047 000 - 61488271
|
|
197 Current_Pending_Sector -O--C- 100 100 000 - 3
|
|
198 Offline_Uncorrectable ----C- 100 100 000 - 3
|
|
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
|
|
200 Multi_Zone_Error_Rate ------ 100 253 000 - 0
|
|
202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0
|
|
||||||_ K auto-keep
|
|
|||||__ C event count
|
|
||||___ R error rate
|
|
|||____ S speed/performance
|
|
||_____ O updated online
|
|
|______ P prefailure warning
|
|
|
|
General Purpose Log Directory not supported
|
|
|
|
SMART Log Directory Version 1 [multi-sector log support]
|
|
Address Access R/W Size Description
|
|
0x00 SL R/O 1 Log Directory
|
|
0x01 SL R/O 1 Summary SMART error log
|
|
0x02 SL R/O 5 Comprehensive SMART error log
|
|
0x03 SL R/O 5 Ext. Comprehensive SMART error log
|
|
0x06 SL R/O 1 SMART self-test log
|
|
0x07 SL R/O 1 Extended self-test log
|
|
0x09 SL R/W 1 Selective self-test log
|
|
0x20 SL R/O 1 Streaming performance log [OBS-8]
|
|
0x21 SL R/O 1 Write stream error log
|
|
0x22 SL R/O 1 Read stream error log
|
|
0x23 SL R/O 1 Delayed sector log [OBS-8]
|
|
0x80-0x9f SL R/W 16 Host vendor specific log
|
|
0xa0 SL VS 1 Device vendor specific log
|
|
0xa1 SL VS 20 Device vendor specific log
|
|
0xa2 SL VS 101 Device vendor specific log
|
|
0xa8 SL VS 20 Device vendor specific log
|
|
0xa9 SL VS 1 Device vendor specific log
|
|
0xe0 SL R/W 1 SCT Command/Status
|
|
0xe1 SL R/W 1 SCT Data Transfer
|
|
|
|
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
|
|
|
|
SMART Error Log Version: 1
|
|
ATA Error Count: 72 (device log contains only the most recent five errors)
|
|
CR = Command Register [HEX]
|
|
FR = Features Register [HEX]
|
|
SC = Sector Count Register [HEX]
|
|
SN = Sector Number Register [HEX]
|
|
CL = Cylinder Low Register [HEX]
|
|
CH = Cylinder High Register [HEX]
|
|
DH = Device/Head Register [HEX]
|
|
DC = Device Command Register [HEX]
|
|
ER = Error register [HEX]
|
|
ST = Status register [HEX]
|
|
Powered_Up_Time is measured from power on, and printed as
|
|
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
|
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
|
|
|
Error 72 occurred at disk power-on lifetime: 43368 hours (1807 days + 0 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER ST SC SN CL CH DH
|
|
-- -- -- -- -- -- --
|
|
40 51 88 67 95 2b e0 Error: UNC 136 sectors at LBA = 0x002b9567 = 2856295
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|
-- -- -- -- -- -- -- -- ---------------- --------------------
|
|
25 00 00 df 94 2b e0 00 00:57:13.588 READ DMA EXT
|
|
25 00 00 df 93 2b e0 00 00:57:13.585 READ DMA EXT
|
|
25 00 00 df 92 2b e0 00 00:57:13.584 READ DMA EXT
|
|
25 00 00 df 91 2b e0 00 00:57:13.583 READ DMA EXT
|
|
35 00 80 5f b2 f6 e0 00 00:57:14.058 WRITE DMA EXT
|
|
|
|
Error 71 occurred at disk power-on lifetime: 41966 hours (1748 days + 14 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER ST SC SN CL CH DH
|
|
-- -- -- -- -- -- --
|
|
40 51 08 67 81 21 e0 Error: UNC 8 sectors at LBA = 0x00218167 = 2195815
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|
-- -- -- -- -- -- -- -- ---------------- --------------------
|
|
25 00 20 5f 81 21 e0 00 00:28:24.182 READ DMA EXT
|
|
25 00 3e 87 49 57 e0 00 00:28:24.171 READ DMA EXT
|
|
35 00 20 7f 3b b6 e0 00 00:28:24.171 WRITE DMA EXT
|
|
25 00 40 b7 48 57 e0 00 00:28:24.170 READ DMA EXT
|
|
35 00 20 ff 6a b6 e0 00 00:28:24.165 WRITE DMA EXT
|
|
|
|
Error 70 occurred at disk power-on lifetime: 18892 hours (787 days + 4 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER ST SC SN CL CH DH
|
|
-- -- -- -- -- -- --
|
|
40 51 36 b7 01 62 e0 Error: UNC 54 sectors at LBA = 0x006201b7 = 6422967
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|
-- -- -- -- -- -- -- -- ---------------- --------------------
|
|
25 20 3e 81 01 62 e0 00 00:00:17.033 READ DMA EXT
|
|
25 20 02 7f 01 62 e0 00 00:00:17.032 READ DMA EXT
|
|
25 20 3b 84 42 51 e0 00 00:00:17.032 READ DMA EXT
|
|
25 20 05 7f 42 51 e0 00 00:00:17.031 READ DMA EXT
|
|
25 20 02 ff fd 50 e0 00 00:00:17.031 READ DMA EXT
|
|
|
|
Error 69 occurred at disk power-on lifetime: 18876 hours (786 days + 12 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER ST SC SN CL CH DH
|
|
-- -- -- -- -- -- --
|
|
40 51 01 1f f4 09 e0 Error: UNC at LBA = 0x0009f41f = 652319
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|
-- -- -- -- -- -- -- -- ---------------- --------------------
|
|
42 00 01 1f f4 09 e0 00 00:21:42.234 READ VERIFY SECTOR(S) EXT
|
|
25 00 01 00 00 00 e0 00 00:21:42.221 READ DMA EXT
|
|
42 00 02 21 f4 09 e0 00 00:21:42.208 READ VERIFY SECTOR(S) EXT
|
|
25 00 01 00 00 00 e0 00 00:21:42.193 READ DMA EXT
|
|
42 00 02 1f f4 09 e0 00 00:21:52.569 READ VERIFY SECTOR(S) EXT
|
|
|
|
Error 68 occurred at disk power-on lifetime: 18876 hours (786 days + 12 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER ST SC SN CL CH DH
|
|
-- -- -- -- -- -- --
|
|
40 51 02 1f f4 09 e0 Error: UNC at LBA = 0x0009f41f = 652319
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|
-- -- -- -- -- -- -- -- ---------------- --------------------
|
|
42 00 02 1f f4 09 e0 00 00:21:42.234 READ VERIFY SECTOR(S) EXT
|
|
42 00 04 23 f4 09 e0 00 00:21:42.221 READ VERIFY SECTOR(S) EXT
|
|
25 00 01 00 00 00 e0 00 00:21:42.208 READ DMA EXT
|
|
42 00 04 1f f4 09 e0 00 00:21:42.193 READ VERIFY SECTOR(S) EXT
|
|
25 00 01 00 00 00 e0 00 00:21:38.820 READ DMA EXT
|
|
|
|
SMART Extended Self-test Log (GP Log 0x07) not supported
|
|
|
|
SMART Self-test log structure revision number 1
|
|
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|
# 1 Short offline Completed without error 00% 48068 -
|
|
# 2 Short offline Completed without error 00% 2 -
|
|
|
|
SMART Selective self-test log data structure revision number 1
|
|
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|
1 0 0 Not_testing
|
|
2 0 0 Not_testing
|
|
3 0 0 Not_testing
|
|
4 0 0 Not_testing
|
|
5 0 0 Not_testing
|
|
Selective self-test flags (0x0):
|
|
After scanning selected spans, do NOT read-scan remainder of disk.
|
|
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|
|
|
SCT Commands not supported
|
|
|
|
Device Statistics (GP/SMART Log 0x04) not supported
|
|
|
|
Pending Defects log (GP Log 0x0c) not supported
|
|
|
|
SATA Phy Event Counters (GP Log 0x11) not supported
|
|
|