80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Seagate/ST320/ST320LM001 HN-M320MBB/3A69CEC02168
Andrey Ponomarenko 2a811b67c1 Update of reports (new: 6895, modified: 16)
2025-01-05 01:57:11 +03:00

348 lines
18 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Samsung SpinPoint M8 (AF)
Device Model: ST320LM001 HN-M320MBB
Serial Number: --
LU WWN Device Id: 5 0004cf ...
Firmware Version: 2AR20002
User Capacity: 320,072,933,376 bytes [320 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database 7.3/5319
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Fri Aug 16 17:50:21 2024 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Disabled
APM level is: 254 (maximum performance)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 5220) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 87) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 100 100 051 - 983
2 Throughput_Performance -OS--K 252 252 000 - 0
3 Spin_Up_Time PO---K 082 054 025 - 5711
4 Start_Stop_Count -O--CK 093 093 000 - 7175
5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0
7 Seek_Error_Rate -OSR-K 252 252 051 - 0
8 Seek_Time_Performance --S--K 252 252 015 - 0
9 Power_On_Hours -O--CK 100 100 000 - 20383
10 Spin_Retry_Count -O--CK 252 252 051 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 190
12 Power_Cycle_Count -O--CK 093 093 000 - 7377
191 G-Sense_Error_Rate -O---K 100 100 000 - 2968
192 Power-Off_Retract_Count -O---K 252 252 000 - 0
194 Temperature_Celsius -O---- 064 048 000 - 35 (Min/Max 18/52)
195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0
196 Reallocated_Event_Count -O--CK 252 252 000 - 0
197 Current_Pending_Sector -O--CK 252 100 000 - 0
198 Offline_Uncorrectable ----CK 252 100 000 - 0
199 UDMA_CRC_Error_Count -OS-CK 098 098 000 - 1508
200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 376207
223 Load_Retry_Count -O--CK 100 100 000 - 190
225 Load_Cycle_Count -O--CK 036 036 000 - 656345
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 2 Comprehensive SMART error log
0x03 GPL R/O 2 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 2 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xc0-0xdf GPL,SL VS 16 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
Device Error Count: 2389 (device log contains only the most recent 8 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 2389 [4] occurred at disk power-on lifetime: 20370 hours (848 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 51 00 00 01 00 22 af e0 00 Error: ICRC, ABRT 81 sectors at LBA = 0x010022af = 16786095
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 02 00 00 00 01 00 21 00 e0 08 00:00:01.406 WRITE DMA EXT
35 00 00 02 00 00 00 01 00 1f 00 e0 08 00:00:01.406 WRITE DMA EXT
25 00 00 02 00 00 00 00 0f c0 90 e0 08 00:00:01.406 READ DMA EXT
35 00 00 02 00 00 00 01 00 1d 00 e0 08 00:00:01.406 WRITE DMA EXT
ca 00 00 00 08 00 00 00 08 19 18 ee 08 00:00:01.406 WRITE DMA
Error 2388 [3] occurred at disk power-on lifetime: 20358 hours (848 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 e0 00 00 00 11 81 80 40 00 Error: UNC at LBA = 0x00118180 = 1147264
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 01 00 00 00 00 11 82 60 40 08 00:00:00.415 READ FPDMA QUEUED
60 00 00 01 00 00 00 00 11 81 60 40 08 00:00:00.412 READ FPDMA QUEUED
60 00 00 01 00 00 00 00 11 81 60 40 08 00:00:00.413 READ FPDMA QUEUED
60 00 00 01 00 00 00 00 11 80 60 40 08 00:00:00.413 READ FPDMA QUEUED
60 00 00 01 00 00 00 00 11 7f 60 40 08 00:00:00.413 READ FPDMA QUEUED
Error 2387 [2] occurred at disk power-on lifetime: 20357 hours (848 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 01 00 00 00 11 81 87 40 00 Error: UNC at LBA = 0x00118187 = 1147271
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 90 00 01 00 00 00 11 81 87 40 00 00:00:14.489 READ FPDMA QUEUED
60 00 90 00 01 00 00 00 11 81 87 40 00 00:00:14.610 READ FPDMA QUEUED
ef 00 90 00 03 00 00 00 00 00 00 a0 00 00:00:14.610 SET FEATURES [Disable SATA feature]
ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:00:14.610 SET FEATURES [Enable write cache]
00 00 90 01 00 00 00 00 61 d2 78 40 00 00:00:14.610 NOP [Reserved subcommand] [OBS-ACS-2]
Error 2386 [1] occurred at disk power-on lifetime: 20357 hours (848 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 01 00 00 00 11 81 87 40 00 Error: WP at LBA = 0x00118187 = 1147271
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 90 00 08 00 00 00 0f 5e 50 40 00 00:00:14.582 WRITE FPDMA QUEUED
60 00 90 00 01 00 00 00 11 81 87 40 00 00:00:14.489 READ FPDMA QUEUED
60 00 90 00 01 00 00 00 11 81 87 40 00 00:00:14.580 READ FPDMA QUEUED
61 00 90 00 08 00 00 00 03 f2 d8 40 00 00:00:14.580 WRITE FPDMA QUEUED
61 00 90 01 00 00 00 12 4c e5 30 40 00 00:00:14.580 WRITE FPDMA QUEUED
Error 2385 [0] occurred at disk power-on lifetime: 20357 hours (848 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 01 00 00 00 11 81 87 40 00 Error: WP at LBA = 0x00118187 = 1147271
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 08 00 00 00 04 4b 18 40 00 00:00:14.553 WRITE FPDMA QUEUED
60 00 90 00 01 00 00 00 11 81 87 40 00 00:00:14.489 READ FPDMA QUEUED
60 00 00 00 01 00 00 00 11 81 87 40 00 00:00:14.551 READ FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 e0 00 00:00:14.551 FLUSH CACHE EXT
61 00 90 00 08 00 00 00 61 5e 08 40 00 00:00:14.551 WRITE FPDMA QUEUED
Error 2384 [7] occurred at disk power-on lifetime: 20357 hours (848 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 01 00 00 00 11 81 86 40 00 Error: UNC at LBA = 0x00118186 = 1147270
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 90 00 01 00 00 00 11 81 86 40 00 00:00:14.426 READ FPDMA QUEUED
60 00 90 00 01 00 00 00 11 81 86 40 00 00:00:14.548 READ FPDMA QUEUED
61 00 90 01 00 00 00 00 61 fa 78 40 00 00:00:14.548 WRITE FPDMA QUEUED
61 00 90 01 00 00 00 00 61 fb 78 40 00 00:00:14.548 WRITE FPDMA QUEUED
61 00 90 01 00 00 00 00 61 fc 78 40 00 00:00:14.548 WRITE FPDMA QUEUED
Error 2383 [6] occurred at disk power-on lifetime: 20357 hours (848 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 01 00 00 00 11 81 86 40 00 Error: WP at LBA = 0x00118186 = 1147270
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 90 01 00 00 00 00 61 f7 78 40 00 00:00:14.520 WRITE FPDMA QUEUED
60 00 00 00 01 00 00 00 11 81 86 40 00 00:00:14.367 READ FPDMA QUEUED
60 00 90 00 01 00 00 00 11 81 86 40 00 00:00:14.518 READ FPDMA QUEUED
61 00 90 01 00 00 00 00 61 f3 78 40 00 00:00:14.518 WRITE FPDMA QUEUED
61 00 90 01 00 00 00 00 61 f4 78 40 00 00:00:14.518 WRITE FPDMA QUEUED
Error 2382 [5] occurred at disk power-on lifetime: 20357 hours (848 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 01 00 00 00 11 81 86 40 00 Error: WP at LBA = 0x00118186 = 1147270
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 90 01 00 00 00 00 61 ef 78 40 00 00:00:14.491 WRITE FPDMA QUEUED
60 00 90 00 01 00 00 00 11 81 86 40 00 00:00:14.367 READ FPDMA QUEUED
60 00 90 00 01 00 00 00 11 81 86 40 00 00:00:14.489 READ FPDMA QUEUED
61 00 90 01 00 00 00 00 61 ee 78 40 00 00:00:14.489 WRITE FPDMA QUEUED
61 00 90 01 00 00 00 00 61 ed 78 40 00 00:00:14.489 WRITE FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (2 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 20358 1147264
# 2 Extended offline Completed: read failure 90% 20358 1147264
# 3 Short offline Completed: read failure 90% 20358 1147264
# 4 Short offline Completed: read failure 90% 20358 1147264
# 5 Short offline Completed without error 00% 17401 -
# 6 Short offline Completed without error 00% 14013 -
# 7 Short offline Completed without error 00% 13750 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed_read_failure [90% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 256 (0x0100)
Device State: Active (0)
Current Temperature: 35 Celsius
Power Cycle Min/Max Temperature: 24/36 Celsius
Lifetime Min/Max Temperature: 18/53 Celsius
Specified Max Operating Temperature: 80 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 5 minutes
Temperature Logging Interval: 5 minutes
Min/Max recommended Temperature: -5/80 Celsius
Min/Max Temperature Limit: -10/85 Celsius
Temperature History Size (Index): 128 (28)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0007 4 0 R_ERR response for host-to-device non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 39 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 12 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
0x8e00 4 0 Vendor specific
0x8e01 4 0 Vendor specific
0x8e02 4 0 Vendor specific
0x8e03 4 0 Vendor specific
0x8e04 4 0 Vendor specific
0x8e05 4 0 Vendor specific
0x8e06 4 0 Vendor specific
0x8e07 4 0 Vendor specific
0x8e08 4 0 Vendor specific
0x8e09 4 0 Vendor specific
0x8e0a 4 0 Vendor specific
0x8e0b 4 0 Vendor specific
0x8e0c 4 0 Vendor specific
0x8e0d 4 0 Vendor specific
0x8e0e 4 0 Vendor specific
0x8e0f 4 0 Vendor specific
0x8e10 4 0 Vendor specific
0x8e11 4 0 Vendor specific
View Git Blame Copy Permalink