80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Seagate/ST320/ST320LT012-1DG14C/D1CE46D52AD1
Andrey Ponomarenko 2a811b67c1 Update of reports (new: 6895, modified: 16)
2025-01-05 01:57:11 +03:00

325 lines
16 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p4 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Laptop HDD
Device Model: ST320LT012-1DG14C
Serial Number: --
LU WWN Device Id: 5 000c50 ...
Firmware Version: 0001SDM1
User Capacity: 320,072,933,376 bytes [320 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database 7.3/5528
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sun Dec 3 04:02:56 2023 -04
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 81) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x1035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 115 085 006 - 91376648
3 Spin_Up_Time PO---- 099 099 000 - 0
4 Start_Stop_Count -O--CK 098 098 020 - 2152
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
7 Seek_Error_Rate POSR-- 063 060 030 - 120332523454
9 Power_On_Hours -O--CK 096 096 000 - 4026 (86 25 0)
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 099 099 020 - 1469
184 End-to-End_Error -O--CK 100 100 099 - 0
187 Reported_Uncorrect -O--CK 001 001 000 - 3224
188 Command_Timeout -O--CK 100 099 000 - 8
189 High_Fly_Writes -O-RCK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 071 050 045 - 29 (Min/Max 29/29)
191 G-Sense_Error_Rate -O--CK 100 100 000 - 749
192 Power-Off_Retract_Count -O--CK 100 100 000 - 275
193 Load_Cycle_Count -O--CK 073 073 000 - 55061
194 Temperature_Celsius -O---K 029 050 000 - 29 (0 22 0 0 0)
197 Current_Pending_Sector -O--C- 100 099 000 - 0
198 Offline_Uncorrectable ----C- 100 099 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
240 Head_Flying_Hours ------ 097 097 000 - 3341 (20 49 0)
241 Total_LBAs_Written ------ 100 253 000 - 7518725224
242 Total_LBAs_Read ------ 100 253 000 - 11546483427
254 Free_Fall_Sensor -O--CK 100 100 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 20 Device vendor specific log
0xa2 GPL VS 2248 Device vendor specific log
0xa8 GPL,SL VS 65 Device vendor specific log
0xa9 GPL,SL VS 1 Device vendor specific log
0xab GPL VS 1 Device vendor specific log
0xb0 GPL VS 2864 Device vendor specific log
0xbd-0xbf GPL VS 65535 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL,SL VS 10 Device vendor specific log
0xc3 GPL,SL VS 8 Device vendor specific log
0xc4 GPL,SL VS 18 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 3247 (device log contains only the most recent 20 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 3247 [6] occurred at disk power-on lifetime: 3791 hours (157 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 02 21 62 00 00 00 Error: UNC at LBA = 0x02216200 = 35742208
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 01 00 00 00 02 21 61 88 e0 00 00:02:04.198 READ DMA EXT
25 00 00 01 00 00 00 02 21 60 88 e0 00 00:02:04.196 READ DMA EXT
25 00 00 00 08 00 00 02 21 60 08 e0 00 00:02:04.196 READ DMA EXT
35 00 00 00 01 00 00 01 f9 0e 8e e0 00 00:02:04.195 WRITE DMA EXT
25 00 00 00 40 00 00 01 e0 b3 70 e0 00 00:02:04.195 READ DMA EXT
Error 3246 [5] occurred at disk power-on lifetime: 3791 hours (157 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 02 21 62 00 00 00 Error: UNC at LBA = 0x02216200 = 35742208
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 01 00 00 00 02 21 5f 88 e0 00 00:02:01.085 READ DMA EXT
25 00 00 01 00 00 00 02 21 5e 88 e0 00 00:02:01.081 READ DMA EXT
25 00 00 00 08 00 00 02 21 5e 48 e0 00 00:02:01.080 READ DMA EXT
25 00 00 00 08 00 00 01 e0 b2 e0 e0 00 00:02:01.080 READ DMA EXT
35 00 00 01 00 00 00 00 4c f2 c0 e0 00 00:02:01.079 WRITE DMA EXT
Error 3245 [4] occurred at disk power-on lifetime: 3791 hours (157 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 02 21 62 00 00 00 Error: UNC at LBA = 0x02216200 = 35742208
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 01 00 00 00 02 21 61 10 e0 00 00:01:57.558 READ DMA EXT
25 00 00 01 00 00 00 02 21 60 10 e0 00 00:01:57.535 READ DMA EXT
25 00 00 01 00 00 00 02 21 5f 10 e0 00 00:01:57.513 READ DMA EXT
25 00 00 01 00 00 00 02 21 5e 10 e0 00 00:01:57.489 READ DMA EXT
25 00 00 01 00 00 00 02 21 5d 10 e0 00 00:01:57.465 READ DMA EXT
Error 3244 [3] occurred at disk power-on lifetime: 3791 hours (157 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 02 21 62 00 00 00 Error: UNC at LBA = 0x02216200 = 35742208
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 01 00 00 00 02 21 5e 10 e0 00 00:01:54.204 READ DMA EXT
25 00 00 01 00 00 00 02 21 5d 10 e0 00 00:01:54.198 READ DMA EXT
25 00 00 00 08 00 00 01 e0 b1 d8 e0 00 00:01:54.197 READ DMA EXT
25 00 00 01 00 00 00 01 8c 66 a8 e0 00 00:01:54.194 READ DMA EXT
25 00 00 01 00 00 00 01 8c 65 a8 e0 00 00:01:54.182 READ DMA EXT
Error 3243 [2] occurred at disk power-on lifetime: 3791 hours (157 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 02 21 62 00 00 00 Error: UNC at LBA = 0x02216200 = 35742208
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 01 00 00 00 02 21 5e 10 e0 00 00:01:51.053 READ DMA EXT
25 00 00 01 00 00 00 02 21 5d 10 e0 00 00:01:51.046 READ DMA EXT
25 00 00 01 00 00 00 01 8c 65 88 e0 00 00:01:51.041 READ DMA EXT
25 00 00 01 00 00 00 01 8c 64 88 e0 00 00:01:51.025 READ DMA EXT
25 00 00 00 40 00 00 01 28 2b 48 e0 00 00:01:51.015 READ DMA EXT
Error 3242 [1] occurred at disk power-on lifetime: 3791 hours (157 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 02 21 62 00 00 00 Error: UNC at LBA = 0x02216200 = 35742208
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 01 00 00 00 02 21 61 10 e0 00 00:01:47.864 READ DMA EXT
25 00 00 01 00 00 00 02 21 60 10 e0 00 00:01:47.864 READ DMA EXT
25 00 00 01 00 00 00 02 21 5f 10 e0 00 00:01:47.858 READ DMA EXT
25 00 00 01 00 00 00 02 21 5e 10 e0 00 00:01:47.836 READ DMA EXT
25 00 00 01 00 00 00 02 21 5d 10 e0 00 00:01:47.816 READ DMA EXT
Error 3241 [0] occurred at disk power-on lifetime: 3791 hours (157 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 02 21 62 00 00 00 Error: UNC at LBA = 0x02216200 = 35742208
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 01 00 00 00 02 21 5e 10 e0 00 00:01:44.662 READ DMA EXT
25 00 00 01 00 00 00 02 21 5d 10 e0 00 00:01:44.652 READ DMA EXT
25 00 00 00 98 00 00 01 fb 19 88 e0 00 00:01:44.651 READ DMA EXT
25 00 00 00 08 00 00 01 fb 19 48 e0 00 00:01:44.645 READ DMA EXT
25 00 00 00 a8 00 00 01 8c 67 88 e0 00 00:01:44.643 READ DMA EXT
Error 3240 [19] occurred at disk power-on lifetime: 3791 hours (157 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 02 21 62 00 00 00 Error: UNC at LBA = 0x02216200 = 35742208
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 01 00 00 00 02 21 61 10 e0 00 00:01:41.136 READ DMA EXT
25 00 00 01 00 00 00 02 21 60 10 e0 00 00:01:41.136 READ DMA EXT
25 00 00 01 00 00 00 02 21 5f 10 e0 00 00:01:40.957 READ DMA EXT
25 00 00 01 00 00 00 02 21 5e 10 e0 00 00:01:40.924 READ DMA EXT
25 00 00 01 00 00 00 02 21 5d 10 e0 00 00:01:40.907 READ DMA EXT
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
Device State: Active (0)
Current Temperature: 29 Celsius
Power Cycle Min/Max Temperature: 29/29 Celsius
Lifetime Min/Max Temperature: 21/50 Celsius
Specified Max Operating Temperature: 39 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 30 minutes
Min/Max recommended Temperature: 14/55 Celsius
Min/Max Temperature Limit: 10/60 Celsius
Temperature History Size (Index): 128 (87)
SCT Error Recovery Control command not supported
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
View Git Blame Copy Permalink