80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Seagate/ST3200/ST3200822AS/2003FF33E5E8
Andrey Ponomarenko a41331e270 Update of reports (new: 14, modified: 3797)
2023-02-14 02:15:20 +03:00

246 lines
11 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE-p5 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus
Device Model: ST3200822AS
Serial Number: --
Firmware Version: 3.02
User Capacity: 200,049,647,616 bytes [200 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-6 T13/1410D revision 2
Local Time is: Sat Jan 1 11:14:16 2022 MST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Unavailable
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 111) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 055 046 006 - 93503769
3 Spin_Up_Time PO---- 096 096 000 - 0
4 Start_Stop_Count -O--CK 099 099 020 - 2001
5 Reallocated_Sector_Ct PO--CK 070 070 036 - 1222
7 Seek_Error_Rate POSR-- 089 060 030 - 939346016
9 Power_On_Hours -O--CK 012 012 000 - 77296
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 099 099 020 - 1994
194 Temperature_Celsius -O---K 038 052 000 - 38
195 Hardware_ECC_Recovered -O-RC- 055 046 000 - 93503769
197 Current_Pending_Sector -O--C- 100 100 000 - 35
198 Offline_Uncorrectable ----C- 100 100 000 - 35
199 UDMA_CRC_Error_Count -OSRCK 200 199 000 - 1
200 Multi_Zone_Error_Rate ------ 100 253 000 - 0
202 Data_Address_Mark_Errs -O--CK 030 183 000 - 70
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory not supported
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 SL R/O 5 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 SL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x20 SL R/O 1 Streaming performance log [OBS-8]
0x21 SL R/O 1 Write stream error log
0x22 SL R/O 1 Read stream error log
0x23 SL R/O 1 Delayed sector log [OBS-8]
0x80-0x9f SL R/W 16 Host vendor specific log
0xa0 SL VS 1 Device vendor specific log
0xa1 SL VS 20 Device vendor specific log
0xa2 SL VS 101 Device vendor specific log
0xa8 SL VS 20 Device vendor specific log
0xa9 SL VS 1 Device vendor specific log
0xb0 SL VS 1 Device vendor specific log
0xb4 SL VS 4 Device vendor specific log
0xbe-0xbf SL VS 1 Device vendor specific log
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log Version: 1
ATA Error Count: 1447 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1447 occurred at disk power-on lifetime: 11713 hours (488 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 97 be c6 13 40 Error: UNC 151 sectors at LBA = 0x0013c6be = 1296062
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 00 27 c4 13 40 00 17:59:17.983 READ DMA EXT
25 00 00 27 c4 13 40 00 17:59:17.967 READ DMA EXT
25 00 00 27 bc 13 40 00 17:59:25.827 READ DMA EXT
25 00 00 27 b4 13 40 00 17:59:20.812 READ DMA EXT
25 00 00 27 ac 13 40 00 17:59:19.512 READ DMA EXT
Error 1446 occurred at disk power-on lifetime: 11713 hours (488 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 97 be c6 13 40 Error: UNC 151 sectors at LBA = 0x0013c6be = 1296062
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 00 27 c4 13 40 00 17:59:17.983 READ DMA EXT
25 00 00 27 bc 13 40 00 17:59:17.967 READ DMA EXT
25 00 00 27 b4 13 40 00 17:59:17.944 READ DMA EXT
25 00 00 27 ac 13 40 00 17:59:20.812 READ DMA EXT
25 00 00 27 a4 13 40 00 17:59:19.512 READ DMA EXT
Error 1445 occurred at disk power-on lifetime: 10788 hours (449 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 6f fe 5e 1b 40 Error: UNC 111 sectors at LBA = 0x001b5efe = 1793790
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 00 8f 57 1b 40 00 13:39:13.972 READ DMA EXT
25 00 00 8f 57 1b 40 00 13:39:13.972 READ DMA EXT
25 00 00 8f 57 1b 40 00 13:39:13.897 READ DMA EXT
25 00 00 8f 57 1b 40 00 13:39:35.598 READ DMA EXT
25 00 00 8f 57 1b 40 00 13:39:31.119 READ DMA EXT
Error 1444 occurred at disk power-on lifetime: 10788 hours (449 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 6f fe 5e 1b 40 Error: UNC 111 sectors at LBA = 0x001b5efe = 1793790
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 00 8f 57 1b 40 00 13:39:13.972 READ DMA EXT
25 00 00 8f 57 1b 40 00 13:39:13.972 READ DMA EXT
25 00 00 8f 57 1b 40 00 13:39:13.897 READ DMA EXT
25 00 00 8f 57 1b 40 00 13:39:13.727 READ DMA EXT
25 00 00 8f 4f 1b 40 00 13:39:31.119 READ DMA EXT
Error 1443 occurred at disk power-on lifetime: 10788 hours (449 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 6f fe 5e 1b 40 Error: UNC 111 sectors at LBA = 0x001b5efe = 1793790
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 00 8f 57 1b 40 00 13:39:13.972 READ DMA EXT
25 00 00 8f 57 1b 40 00 13:39:13.972 READ DMA EXT
25 00 00 8f 57 1b 40 00 13:39:13.897 READ DMA EXT
25 00 00 8f 4f 1b 40 00 13:39:13.727 READ DMA EXT
25 00 00 8f 47 1b 40 00 13:39:13.696 READ DMA EXT
SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 6682 -
# 2 Short offline Completed without error 00% 6554 -
# 3 Extended offline Completed without error 00% 4043 -
# 4 Short offline Completed without error 00% 4042 -
# 5 Short offline Completed without error 00% 4041 -
# 6 Short offline Completed without error 00% 35552 -
# 7 Short offline Completed without error 00% 33649 -
# 8 Short captive Completed: read failure 90% 33627 182741979
# 9 Extended captive Completed: read failure 90% 33627 182741979
#10 Extended captive Completed: read failure 90% 33627 182741979
#11 Short offline Completed without error 00% 0 -
3 of 3 failed self-tests are outdated by newer successful extended offline self-test # 3
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Commands not supported
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11) not supported
View Git Blame Copy Permalink