mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
93 lines
4.5 KiB
Plaintext
93 lines
4.5 KiB
Plaintext
smartctl 7.3 2022-02-28 r5338 [OpenBSD 7.1 amd64] (local build)
|
|
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Model Family: Seagate Barracuda 7200.10
|
|
Device Model: ST3250310AS
|
|
Serial Number: --
|
|
Firmware Version: 3.AAA
|
|
User Capacity: 250,059,350,016 bytes [250 GB]
|
|
Sector Size: 512 bytes logical/physical
|
|
Device is: In smartctl database 7.3/5319
|
|
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
|
|
Local Time is: Mon Jun 6 13:20:23 2022 EDT
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART Status not supported: Incomplete response, ATA output registers missing
|
|
SMART overall-health self-assessment test result: PASSED
|
|
Warning: This result is based on an Attribute check.
|
|
See vendor-specific Attribute list for marginal Attributes.
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x82) Offline data collection activity
|
|
was completed without error.
|
|
Auto Offline Data Collection: Enabled.
|
|
Self-test execution status: ( 0) The previous self-test routine completed
|
|
without error or no self-test has ever
|
|
been run.
|
|
Total time to complete Offline
|
|
data collection: ( 430) seconds.
|
|
Offline data collection
|
|
capabilities: (0x5b) SMART execute Offline immediate.
|
|
Auto Offline data collection on/off support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
Offline surface scan supported.
|
|
Self-test supported.
|
|
No Conveyance Self-test supported.
|
|
Selective Self-test supported.
|
|
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
General Purpose Logging supported.
|
|
Short self-test routine
|
|
recommended polling time: ( 1) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 92) minutes.
|
|
|
|
SMART Attributes Data Structure revision number: 10
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
|
1 Raw_Read_Error_Rate 0x000f 107 086 006 Pre-fail Always - 221912134
|
|
3 Spin_Up_Time 0x0003 098 097 000 Pre-fail Always - 0
|
|
4 Start_Stop_Count 0x0032 087 087 020 Old_age Always - 13938
|
|
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
|
|
7 Seek_Error_Rate 0x000f 086 060 030 Pre-fail Always - 457152431
|
|
9 Power_On_Hours 0x0032 068 068 000 Old_age Always - 28576
|
|
10 Spin_Retry_Count 0x0013 100 099 097 Pre-fail Always - 0
|
|
12 Power_Cycle_Count 0x0032 098 098 020 Old_age Always - 2430
|
|
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
|
|
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
|
|
190 Airflow_Temperature_Cel 0x0022 060 036 045 Old_age Always In_the_past 40 (255 255 41 37 0)
|
|
194 Temperature_Celsius 0x0022 040 064 000 Old_age Always - 40 (0 16 0 0 0)
|
|
195 Hardware_ECC_Recovered 0x001a 061 049 000 Old_age Always - 154411052
|
|
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
|
|
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
|
|
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
|
|
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
|
|
202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0
|
|
|
|
SMART Error Log Version: 1
|
|
No Errors Logged
|
|
|
|
SMART Self-test log structure revision number 1
|
|
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|
# 1 Short offline Completed without error 00% 19808 -
|
|
|
|
SMART Selective self-test log data structure revision number 1
|
|
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|
1 0 0 Not_testing
|
|
2 0 0 Not_testing
|
|
3 0 0 Not_testing
|
|
4 0 0 Not_testing
|
|
5 0 0 Not_testing
|
|
Selective self-test flags (0x0):
|
|
After scanning selected spans, do NOT read-scan remainder of disk.
|
|
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|
|
|
|
|
|