mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
161 lines
7.3 KiB
Plaintext
161 lines
7.3 KiB
Plaintext
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE amd64] (local build)
|
|
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Model Family: Seagate Barracuda 7200.10
|
|
Device Model: ST3360320AS
|
|
Serial Number: --
|
|
Firmware Version: 3.CHN
|
|
User Capacity: 360,080,695,296 bytes [360 GB]
|
|
Sector Size: 512 bytes logical/physical
|
|
Device is: In smartctl database [for details use: -P show]
|
|
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
|
|
Local Time is: Sun Jun 27 19:52:11 2021 EDT
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
AAM feature is: Unavailable
|
|
APM feature is: Unavailable
|
|
Rd look-ahead is: Enabled
|
|
Write cache is: Enabled
|
|
DSN feature is: Unavailable
|
|
ATA Security is: Unavailable
|
|
Another SCT command is executing, abort Feature Control
|
|
(SCT ext_status_code 0xffff, action_code=4, function_code=2)
|
|
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART overall-health self-assessment test result: PASSED
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x82) Offline data collection activity
|
|
was completed without error.
|
|
Auto Offline Data Collection: Enabled.
|
|
Self-test execution status: ( 0) The previous self-test routine completed
|
|
without error or no self-test has ever
|
|
been run.
|
|
Total time to complete Offline
|
|
data collection: ( 433) seconds.
|
|
Offline data collection
|
|
capabilities: (0x5b) SMART execute Offline immediate.
|
|
Auto Offline data collection on/off support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
Offline surface scan supported.
|
|
Self-test supported.
|
|
No Conveyance Self-test supported.
|
|
Selective Self-test supported.
|
|
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
General Purpose Logging supported.
|
|
Short self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 134) minutes.
|
|
SCT capabilities: (0x0035) SCT Status supported.
|
|
SCT Feature Control supported.
|
|
SCT Data Table supported.
|
|
|
|
SMART Attributes Data Structure revision number: 10
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|
1 Raw_Read_Error_Rate POSR-- 100 253 006 - 0
|
|
3 Spin_Up_Time -O---- 096 095 000 - 0
|
|
4 Start_Stop_Count PO--CK 095 095 020 - 5407
|
|
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
|
|
7 Seek_Error_Rate POSR-- 074 056 030 - 27511809
|
|
9 Power_On_Hours -O--CK 015 015 000 - 75014
|
|
10 Spin_Retry_Count PO--C- 100 100 097 - 0
|
|
12 Power_Cycle_Count PO--CK 096 096 020 - 5014
|
|
184 End-to-End_Error PO--CK 100 253 097 - 0
|
|
187 Reported_Uncorrect -O-RCK 100 100 000 - 0
|
|
189 High_Fly_Writes -O---K 100 100 045 - 0
|
|
190 Airflow_Temperature_Cel -O---K 066 050 000 - 34 (Min/Max 34/34)
|
|
194 Temperature_Celsius -O-RC- 034 050 000 - 34 (0 14 0 0 0)
|
|
195 Hardware_ECC_Recovered -O--C- 066 051 000 - 209987117
|
|
197 Current_Pending_Sector ----C- 100 100 000 - 0
|
|
198 Offline_Uncorrectable -OSRCK 100 100 000 - 0
|
|
199 UDMA_CRC_Error_Count ------ 200 200 000 - 0
|
|
200 Multi_Zone_Error_Rate -O--CK 100 253 000 - 0
|
|
202 Data_Address_Mark_Errs ------ 100 253 000 - 0
|
|
||||||_ K auto-keep
|
|
|||||__ C event count
|
|
||||___ R error rate
|
|
|||____ S speed/performance
|
|
||_____ O updated online
|
|
|______ P prefailure warning
|
|
|
|
General Purpose Log Directory Version 1
|
|
SMART Log Directory Version 1 [multi-sector log support]
|
|
Address Access R/W Size Description
|
|
0x00 GPL,SL R/O 1 Log Directory
|
|
0x01 GPL,SL R/O 1 Summary SMART error log
|
|
0x02 GPL,SL R/O 5 Comprehensive SMART error log
|
|
0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log
|
|
0x06 GPL,SL R/O 1 SMART self-test log
|
|
0x07 GPL,SL R/O 1 Extended self-test log
|
|
0x09 GPL,SL R/W 1 Selective self-test log
|
|
0x10 GPL,SL R/O 1 NCQ Command Error log
|
|
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
|
|
0x20 GPL,SL R/O 1 Streaming performance log [OBS-8]
|
|
0x21 GPL,SL R/O 1 Write stream error log
|
|
0x22 GPL,SL R/O 1 Read stream error log
|
|
0x23 GPL,SL R/O 1 Delayed sector log [OBS-8]
|
|
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|
0xa0 GPL,SL VS 1 Device vendor specific log
|
|
0xa1 GPL,SL VS 20 Device vendor specific log
|
|
0xa2 GPL,SL VS 101 Device vendor specific log
|
|
0xa8 GPL,SL VS 20 Device vendor specific log
|
|
0xa9 GPL,SL VS 1 Device vendor specific log
|
|
0xe0 GPL,SL R/W 1 SCT Command/Status
|
|
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
|
0xff GPL - 23040 Reserved
|
|
|
|
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
|
No Errors Logged
|
|
|
|
SMART Extended Self-test Log Version: 1 (1 sectors)
|
|
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|
# 1 Short offline Completed without error 00% 17805 -
|
|
# 2 Short offline Completed without error 00% 8 -
|
|
# 3 Short offline Completed without error 00% 0 -
|
|
|
|
SMART Selective self-test log data structure revision number 1
|
|
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|
1 0 0 Not_testing
|
|
2 0 0 Not_testing
|
|
3 0 0 Not_testing
|
|
4 0 0 Not_testing
|
|
5 0 0 Not_testing
|
|
Selective self-test flags (0x0):
|
|
After scanning selected spans, do NOT read-scan remainder of disk.
|
|
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|
|
|
SCT Status Version: 2
|
|
SCT Version (vendor specific): 521 (0x0209)
|
|
Device State: Active (0)
|
|
Current Temperature: 34 Celsius
|
|
Power Cycle Min/Max Temperature: --/35 Celsius
|
|
Lifetime Min/Max Temperature: --/50 Celsius
|
|
|
|
Another SCT command is executing, abort Read Data Table
|
|
(SCT ext_status_code 0xffff, action_code=4, function_code=2)
|
|
Read SCT Temperature History failed
|
|
|
|
SCT Error Recovery Control command not supported
|
|
|
|
Device Statistics (GP/SMART Log 0x04) not supported
|
|
|
|
Pending Defects log (GP Log 0x0c) not supported
|
|
|
|
SATA Phy Event Counters (GP Log 0x11)
|
|
ID Size Value Description
|
|
0x000a 2 6 Device-to-host register FISes sent due to a COMRESET
|
|
0x0001 2 0 Command failed due to ICRC error
|
|
0x0003 2 0 R_ERR response for device-to-host data FIS
|
|
0x0004 2 0 R_ERR response for host-to-device data FIS
|
|
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
|
|