80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Seagate/ST3500/ST3500413AS/B0AFDEBA4713
Andrey Ponomarenko bca313f72f Update of reports (new: 0, modified: 707)
2023-02-16 22:22:24 +03:00

325 lines
16 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.12
Device Model: ST3500413AS
Serial Number: --
LU WWN Device Id: 5 000c50 ...
Firmware Version: JC47
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Wed Feb 23 05:52:14 2022 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Disabled
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unknown
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 600) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 79) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 114 092 006 - 74628471
3 Spin_Up_Time PO---- 100 100 000 - 0
4 Start_Stop_Count -O--CK 090 090 020 - 10980
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
7 Seek_Error_Rate POSR-- 082 060 030 - 167791080
9 Power_On_Hours -O--CK 093 093 000 - 6411
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 091 091 020 - 9582
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
184 End-to-End_Error -O--CK 100 100 099 - 0
187 Reported_Uncorrect -O--CK 001 001 000 - 600
188 Command_Timeout -O--CK 100 098 000 - 115965952114
189 High_Fly_Writes -O-RCK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 072 053 045 - 28 (Min/Max 25/28)
194 Temperature_Celsius -O---K 028 047 000 - 28 (0 9 0 0 0)
195 Hardware_ECC_Recovered -O-RC- 035 024 000 - 74628471
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
240 Head_Flying_Hours ------ 100 253 000 - 27272 (241 19 0)
241 Total_LBAs_Written ------ 100 253 000 - 1100675266
242 Total_LBAs_Read ------ 100 253 000 - 1793400756
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x02 GPL,SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 20 Device vendor specific log
0xa2 GPL VS 2248 Device vendor specific log
0xa8 GPL,SL VS 129 Device vendor specific log
0xa9 GPL,SL VS 1 Device vendor specific log
0xb0 GPL VS 2928 Device vendor specific log
0xbd GPL VS 252 Device vendor specific log
0xbe-0xbf GPL VS 65535 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 710 (device log contains only the most recent 20 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 710 [9] occurred at disk power-on lifetime: 5810 hours (242 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 0a 3b 3c f2 00 00 Error: UNC at LBA = 0x0a3b3cf2 = 171654386
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 d0 00 00 0a 3b 3c 68 40 00 01:05:44.486 READ DMA EXT
25 00 00 00 08 00 00 00 4b 3d a8 40 00 01:05:44.441 READ DMA EXT
25 00 00 00 d0 00 00 0a 3b 3c 68 40 00 01:05:41.728 READ DMA EXT
25 00 00 00 08 00 00 0a 3b 4c 88 40 00 01:05:41.726 READ DMA EXT
25 00 00 01 00 00 00 0a 3b 4b 88 40 00 01:05:41.635 READ DMA EXT
Error 709 [8] occurred at disk power-on lifetime: 5810 hours (242 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 0a 3b 3c f2 00 00 Error: UNC at LBA = 0x0a3b3cf2 = 171654386
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 d0 00 00 0a 3b 3c 68 40 00 01:05:41.728 READ DMA EXT
25 00 00 00 08 00 00 0a 3b 4c 88 40 00 01:05:41.726 READ DMA EXT
25 00 00 01 00 00 00 0a 3b 4b 88 40 00 01:05:41.635 READ DMA EXT
25 00 00 00 d0 00 00 0a 3b 3c 68 40 00 01:05:38.894 READ DMA EXT
25 00 00 00 b0 00 00 0a 3b 4a d8 40 00 01:05:38.846 READ DMA EXT
Error 708 [7] occurred at disk power-on lifetime: 5810 hours (242 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 0a 3b 3c f2 00 00 Error: UNC at LBA = 0x0a3b3cf2 = 171654386
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 d0 00 00 0a 3b 3c 68 40 00 01:05:38.894 READ DMA EXT
25 00 00 00 b0 00 00 0a 3b 4a d8 40 00 01:05:38.846 READ DMA EXT
25 00 00 00 d0 00 00 0a 3b 3c 68 40 00 01:05:36.113 READ DMA EXT
25 00 00 00 a0 00 00 0a 3b 4a 38 40 00 01:05:36.024 READ DMA EXT
25 00 00 00 d0 00 00 0a 3b 3c 68 40 00 01:05:33.279 READ DMA EXT
Error 707 [6] occurred at disk power-on lifetime: 5810 hours (242 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 0a 3b 3c f2 00 00 Error: UNC at LBA = 0x0a3b3cf2 = 171654386
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 d0 00 00 0a 3b 3c 68 40 00 01:05:36.113 READ DMA EXT
25 00 00 00 a0 00 00 0a 3b 4a 38 40 00 01:05:36.024 READ DMA EXT
25 00 00 00 d0 00 00 0a 3b 3c 68 40 00 01:05:33.279 READ DMA EXT
25 00 00 00 18 00 00 0a 3b 48 30 40 00 01:05:33.234 READ DMA EXT
25 00 00 00 d0 00 00 0a 3b 3c 68 40 00 01:05:30.515 READ DMA EXT
Error 706 [5] occurred at disk power-on lifetime: 5810 hours (242 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 0a 3b 3c f2 00 00 Error: UNC at LBA = 0x0a3b3cf2 = 171654386
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 d0 00 00 0a 3b 3c 68 40 00 01:05:33.279 READ DMA EXT
25 00 00 00 18 00 00 0a 3b 48 30 40 00 01:05:33.234 READ DMA EXT
25 00 00 00 d0 00 00 0a 3b 3c 68 40 00 01:05:30.515 READ DMA EXT
25 00 00 00 10 00 00 0a 3b 48 20 40 00 01:05:30.429 READ DMA EXT
25 00 00 00 d0 00 00 0a 3b 3c 68 40 00 01:05:27.711 READ DMA EXT
Error 705 [4] occurred at disk power-on lifetime: 5810 hours (242 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 0a 3b 3c f2 00 00 Error: UNC at LBA = 0x0a3b3cf2 = 171654386
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 d0 00 00 0a 3b 3c 68 40 00 01:05:30.515 READ DMA EXT
25 00 00 00 10 00 00 0a 3b 48 20 40 00 01:05:30.429 READ DMA EXT
25 00 00 00 d0 00 00 0a 3b 3c 68 40 00 01:05:27.711 READ DMA EXT
25 00 00 00 40 00 00 0a 3b 47 e0 40 00 01:05:27.709 READ DMA EXT
25 00 00 00 38 00 00 0a 3b 47 a8 40 00 01:05:27.665 READ DMA EXT
Error 704 [3] occurred at disk power-on lifetime: 5810 hours (242 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 0a 3b 3c f2 00 00 Error: UNC at LBA = 0x0a3b3cf2 = 171654386
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 d0 00 00 0a 3b 3c 68 40 00 01:05:27.711 READ DMA EXT
25 00 00 00 40 00 00 0a 3b 47 e0 40 00 01:05:27.709 READ DMA EXT
25 00 00 00 38 00 00 0a 3b 47 a8 40 00 01:05:27.665 READ DMA EXT
25 00 00 00 d0 00 00 0a 3b 3c 68 40 00 01:05:24.937 READ DMA EXT
25 00 00 00 20 00 00 0a 3b 47 88 40 00 01:05:24.843 READ DMA EXT
Error 703 [2] occurred at disk power-on lifetime: 5810 hours (242 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 0a 3b 3c f2 00 00 Error: UNC at LBA = 0x0a3b3cf2 = 171654386
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 d0 00 00 0a 3b 3c 68 40 00 01:05:24.937 READ DMA EXT
25 00 00 00 20 00 00 0a 3b 47 88 40 00 01:05:24.843 READ DMA EXT
25 00 00 00 d0 00 00 0a 3b 3c 68 40 00 01:05:22.125 READ DMA EXT
25 00 00 00 88 00 00 0a 3b 49 20 40 00 01:05:22.078 READ DMA EXT
25 00 00 00 d0 00 00 0a 3b 3c 68 40 00 01:05:19.353 READ DMA EXT
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 90% 5497 171647681
# 2 Short offline Aborted by host 90% 1450 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
Device State: Active (0)
Current Temperature: 28 Celsius
Power Cycle Min/Max Temperature: 25/28 Celsius
Lifetime Min/Max Temperature: 9/46 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 59 minutes
Min/Max recommended Temperature: 14/55 Celsius
Min/Max Temperature Limit: 10/60 Celsius
Temperature History Size (Index): 128 (69)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 8 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
View Git Blame Copy Permalink