80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Seagate/ST3500/ST3500418AS/87B3FD7D2A79
Andrey Ponomarenko 2a811b67c1 Update of reports (new: 6895, modified: 16)
2025-01-05 01:57:11 +03:00

334 lines
16 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p10 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.12
Device Model: ST3500418AS
Serial Number: --
LU WWN Device Id: 5 000c50 ...
Firmware Version: CC46
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database 7.3/5528
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Mon Mar 11 20:59:56 2024 CET
==> WARNING: A firmware update for this drive may be available,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/213891en
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM level is: 0 (vendor specific), recommended: 254
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unknown
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 600) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 86) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 114 099 006 - 78468250
3 Spin_Up_Time PO---- 097 097 000 - 0
4 Start_Stop_Count -O--CK 097 097 020 - 3224
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
7 Seek_Error_Rate POSR-- 081 060 030 - 155925425
9 Power_On_Hours -O--CK 095 095 000 - 4878
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 099 099 020 - 1612
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
184 End-to-End_Error -O--CK 100 100 099 - 0
187 Reported_Uncorrect -O--CK 077 077 000 - 23
188 Command_Timeout -O--CK 100 099 000 - 4295032835
189 High_Fly_Writes -O-RCK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 071 052 045 - 29 (Min/Max 22/29)
194 Temperature_Celsius -O---K 029 048 000 - 29 (0 14 0 0 0)
195 Hardware_ECC_Recovered -O-RC- 030 027 000 - 78468250
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
240 Head_Flying_Hours ------ 100 253 000 - 9286 (252 43 0)
241 Total_LBAs_Written ------ 100 253 000 - 4291972212
242 Total_LBAs_Read ------ 100 253 000 - 2604641375
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x02 GPL,SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 20 Device vendor specific log
0xa2 GPL VS 2248 Device vendor specific log
0xa8 GPL,SL VS 129 Device vendor specific log
0xa9 GPL,SL VS 1 Device vendor specific log
0xb0 GPL VS 2928 Device vendor specific log
0xbd GPL VS 252 Device vendor specific log
0xbe-0xbf GPL VS 65535 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 23 (device log contains only the most recent 20 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 23 [2] occurred at disk power-on lifetime: 2773 hours (115 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 02 2b d6 00 00 00 Error: UNC at LBA = 0x022bd600 = 36427264
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 18 00 00 02 2b d5 ff e0 00 05:14:43.867 READ DMA EXT
35 00 00 00 48 00 00 01 0e 15 07 e0 00 05:14:43.866 WRITE DMA EXT
25 00 00 00 48 00 00 00 f3 bd ff e0 00 05:14:43.865 READ DMA EXT
35 00 00 00 80 00 00 01 0e 14 87 e0 00 05:14:43.864 WRITE DMA EXT
25 00 00 00 80 00 00 00 f3 bd 7f e0 00 05:14:43.863 READ DMA EXT
Error 22 [1] occurred at disk power-on lifetime: 2502 hours (104 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 02 2b d6 00 00 00 Error: UNC at LBA = 0x022bd600 = 36427264
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 18 00 00 02 2b d5 ff e0 00 02:15:12.004 READ DMA EXT
35 00 00 00 48 00 00 00 f3 bd ff e0 00 02:15:12.003 WRITE DMA EXT
25 00 00 00 48 00 00 00 e9 23 97 e0 00 02:15:12.003 READ DMA EXT
35 00 00 00 80 00 00 00 f3 bd 7f e0 00 02:15:12.002 WRITE DMA EXT
25 00 00 00 80 00 00 00 e9 23 17 e0 00 02:15:12.001 READ DMA EXT
Error 21 [0] occurred at disk power-on lifetime: 2416 hours (100 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 02 2b d6 00 00 00 Error: UNC at LBA = 0x022bd600 = 36427264
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 18 00 00 02 2b d5 ff e0 00 01:50:34.781 READ DMA EXT
35 00 00 00 48 00 00 00 e9 23 97 e0 00 01:50:34.780 WRITE DMA EXT
25 00 00 00 48 00 00 00 4e 0e ff e0 00 01:50:34.779 READ DMA EXT
35 00 00 00 80 00 00 00 e9 23 17 e0 00 01:50:34.779 WRITE DMA EXT
25 00 00 00 80 00 00 00 4e 0e 7f e0 00 01:50:34.778 READ DMA EXT
Error 20 [19] occurred at disk power-on lifetime: 2381 hours (99 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 02 2b d6 00 00 00 Error: UNC at LBA = 0x022bd600 = 36427264
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 18 00 00 02 2b d5 ff e0 00 01:12:40.074 READ DMA EXT
35 00 00 00 48 00 00 00 4e 0e ff e0 00 01:12:40.073 WRITE DMA EXT
25 00 00 00 48 00 00 00 4b 20 b7 e0 00 01:12:40.073 READ DMA EXT
35 00 00 00 80 00 00 00 4e 0e 7f e0 00 01:12:40.072 WRITE DMA EXT
25 00 00 00 80 00 00 00 4b 20 37 e0 00 01:12:40.071 READ DMA EXT
Error 19 [18] occurred at disk power-on lifetime: 2378 hours (99 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 02 2b d6 00 00 00 Error: UNC at LBA = 0x022bd600 = 36427264
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 18 00 00 02 2b d5 ff e0 00 00:47:01.544 READ DMA EXT
35 00 00 00 48 00 00 00 4b 20 b7 e0 00 00:47:01.543 WRITE DMA EXT
25 00 00 00 48 00 00 03 72 84 0f e0 00 00:47:01.542 READ DMA EXT
35 00 00 00 80 00 00 00 4b 20 37 e0 00 00:47:01.542 WRITE DMA EXT
25 00 00 00 80 00 00 03 72 83 8f e0 00 00:47:01.541 READ DMA EXT
Error 18 [17] occurred at disk power-on lifetime: 2170 hours (90 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 02 2b d6 00 00 00 Error: UNC at LBA = 0x022bd600 = 36427264
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 18 00 00 02 2b d5 ff e0 00 03:58:03.853 READ DMA EXT
35 00 00 00 48 00 00 03 72 84 0f e0 00 03:58:03.852 WRITE DMA EXT
25 00 00 00 48 00 00 00 e2 28 4f e0 00 03:58:03.851 READ DMA EXT
35 00 00 00 80 00 00 03 72 83 8f e0 00 03:58:03.850 WRITE DMA EXT
25 00 00 00 80 00 00 00 e2 27 cf e0 00 03:58:03.850 READ DMA EXT
Error 17 [16] occurred at disk power-on lifetime: 2124 hours (88 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 02 2b d6 00 00 00 Error: UNC at LBA = 0x022bd600 = 36427264
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 18 00 00 02 2b d5 ff e0 00 02:37:49.609 READ DMA EXT
35 00 00 00 48 00 00 00 e2 28 4f e0 00 02:37:49.608 WRITE DMA EXT
25 00 00 00 48 00 00 03 72 83 57 e0 00 02:37:49.607 READ DMA EXT
35 00 00 00 80 00 00 00 e2 27 cf e0 00 02:37:49.607 WRITE DMA EXT
25 00 00 00 80 00 00 03 72 82 d7 e0 00 02:37:49.606 READ DMA EXT
Error 16 [15] occurred at disk power-on lifetime: 2120 hours (88 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 02 2b d6 00 00 00 Error: UNC at LBA = 0x022bd600 = 36427264
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 18 00 00 02 2b d5 ff e0 00 00:43:11.889 READ DMA EXT
35 00 00 00 48 00 00 03 72 83 57 e0 00 00:43:11.888 WRITE DMA EXT
25 00 00 00 48 00 00 00 66 46 f7 e0 00 00:43:11.888 READ DMA EXT
35 00 00 00 80 00 00 03 72 82 d7 e0 00 00:43:11.887 WRITE DMA EXT
25 00 00 00 80 00 00 00 66 46 77 e0 00 00:43:11.887 READ DMA EXT
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 4794 -
# 2 Extended offline Completed without error 00% 4757 -
# 3 Short offline Completed without error 00% 4750 -
# 4 Short offline Completed without error 00% 4749 -
# 5 Extended offline Interrupted (host reset) 00% 4725 -
# 6 Extended offline Interrupted (host reset) 00% 4723 -
# 7 Short offline Completed without error 00% 4721 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
Device State: Active (0)
Current Temperature: 29 Celsius
Power Cycle Min/Max Temperature: 22/29 Celsius
Lifetime Min/Max Temperature: 14/48 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 59 minutes
Min/Max recommended Temperature: 14/55 Celsius
Min/Max Temperature Limit: 10/60 Celsius
Temperature History Size (Index): 128 (36)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 2 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
View Git Blame Copy Permalink