80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Seagate/ST3750/ST3750640NS/B3E16EA14AD7
Andrey Ponomarenko 06d1e49c98 Update of reports (new: 3633, modified: 0)
2023-02-14 01:25:13 +03:00

321 lines
16 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.0-STABLE amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda ES
Device Model: ST3750640NS
Serial Number: --
Firmware Version: 3.CNK
User Capacity: 750,156,374,016 bytes [750 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database 7.3/5319
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
Local Time is: Mon Apr 18 03:23:51 2022 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 254 (maximum performance)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Unexpected SCT status 0xffff (action_code=4, function_code=2)
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 202) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 086 077 006 - 127512877
3 Spin_Up_Time PO---- 094 093 000 - 0
4 Start_Stop_Count -O--CK 099 099 020 - 1798
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 1
7 Seek_Error_Rate POSR-- 082 060 030 - 177549838
9 Power_On_Hours -O--CK 065 065 000 - 31312
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 099 099 020 - 1708
187 Reported_Uncorrect -O--CK 100 100 000 - 0
189 High_Fly_Writes -O-RCK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 049 041 045 Past 51 (Min/Max 48/51 #79)
194 Temperature_Celsius -O---K 051 059 000 - 51 (0 11 0 0 0)
195 Hardware_ECC_Recovered -O-RC- 051 048 000 - 116988192
197 Current_Pending_Sector -O--C- 100 100 000 - 1
198 Offline_Uncorrectable ----C- 100 100 000 - 1
199 UDMA_CRC_Error_Count -OSRCK 200 105 000 - 977
200 Multi_Zone_Error_Rate ------ 100 253 000 - 0
202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x02 GPL,SL R/O 5 Comprehensive SMART error log
0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 1 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL,SL R/O 1 NCQ Command Error log
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
0x20 GPL,SL R/O 1 Streaming performance log [OBS-8]
0x21 GPL,SL R/O 1 Write stream error log
0x22 GPL,SL R/O 1 Read stream error log
0x23 GPL,SL R/O 1 Delayed sector log [OBS-8]
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0 GPL,SL VS 1 Device vendor specific log
0xa1 GPL,SL VS 20 Device vendor specific log
0xa2 GPL,SL VS 101 Device vendor specific log
0xa8 GPL,SL VS 20 Device vendor specific log
0xa9 GPL,SL VS 1 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
0xff GPL - 23040 Reserved
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 426 (device log contains only the most recent 20 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 426 [5] occurred at disk power-on lifetime: 8375 hours (348 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 57 65 00 54 60 e0 00 03:13:23.688 READ DMA EXT
25 00 00 00 08 00 57 66 00 54 e0 e0 00 03:13:23.687 READ DMA EXT
27 00 00 00 00 00 00 00 00 00 00 e0 00 03:13:23.372 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 01 00 00 ff ff 00 ff ff a0 00 03:13:23.371 IDENTIFY DEVICE
ef 00 03 00 42 00 ff ff 00 ff ff a0 00 03:13:23.371 SET FEATURES [Set transfer mode]
Error 425 [4] occurred at disk power-on lifetime: 8375 hours (348 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 57 66 00 54 e0 e0 00 03:13:22.446 READ DMA EXT
25 00 00 00 08 00 57 65 00 54 f0 e0 00 03:13:22.445 READ DMA EXT
27 00 00 00 00 00 00 00 00 00 00 e0 00 03:13:22.445 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 01 00 00 ff ff 00 ff ff a0 00 03:13:22.444 IDENTIFY DEVICE
ef 00 03 00 42 00 ff ff 00 ff ff a0 00 03:13:21.975 SET FEATURES [Set transfer mode]
Error 424 [3] occurred at disk power-on lifetime: 8375 hours (348 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 57 64 00 54 10 e0 00 03:13:24.671 READ DMA EXT
25 00 00 00 10 00 57 64 00 54 48 e0 00 03:13:25.679 READ DMA EXT
27 00 00 00 00 00 00 00 00 00 00 e0 00 03:13:25.663 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 01 00 00 ff ff 00 ff ff a0 00 03:13:25.606 IDENTIFY DEVICE
ef 00 03 00 42 00 ff ff 00 ff ff a0 00 03:13:25.605 SET FEATURES [Set transfer mode]
Error 423 [2] occurred at disk power-on lifetime: 8375 hours (348 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 10 00 57 64 00 54 48 e0 00 03:13:24.671 READ DMA EXT
25 00 00 00 08 00 57 65 00 54 60 e0 00 03:13:24.670 READ DMA EXT
27 00 00 00 00 00 00 00 00 00 00 e0 00 03:13:24.670 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 01 00 00 ff ff 00 ff ff a0 00 03:13:24.609 IDENTIFY DEVICE
ef 00 03 00 42 00 ff ff 00 ff ff a0 00 03:13:24.609 SET FEATURES [Set transfer mode]
Error 422 [1] occurred at disk power-on lifetime: 8375 hours (348 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 57 65 00 54 60 e0 00 03:13:23.688 READ DMA EXT
25 00 00 00 08 00 57 66 00 54 e0 e0 00 03:13:23.687 READ DMA EXT
27 00 00 00 00 00 00 00 00 00 00 e0 00 03:13:23.372 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 01 00 00 ff ff 00 ff ff a0 00 03:13:23.371 IDENTIFY DEVICE
ef 00 03 00 42 00 ff ff 00 ff ff a0 00 03:13:23.371 SET FEATURES [Set transfer mode]
Error 421 [0] occurred at disk power-on lifetime: 8375 hours (348 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 57 66 00 54 e0 e0 00 03:13:22.446 READ DMA EXT
25 00 00 00 08 00 57 65 00 54 f0 e0 00 03:13:22.445 READ DMA EXT
27 00 00 00 00 00 00 00 00 00 00 e0 00 03:13:22.445 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 01 00 00 ff ff 00 ff ff a0 00 03:13:22.444 IDENTIFY DEVICE
ef 00 03 00 42 00 ff ff 00 ff ff a0 00 03:13:21.975 SET FEATURES [Set transfer mode]
Error 420 [19] occurred at disk power-on lifetime: 8375 hours (348 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 57 64 00 54 10 e0 00 03:13:24.671 READ DMA EXT
25 00 00 00 10 00 57 64 00 54 48 e0 00 03:13:25.679 READ DMA EXT
27 00 00 00 00 00 00 00 00 00 00 e0 00 03:13:25.663 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 01 00 00 ff ff 00 ff ff a0 00 03:13:25.606 IDENTIFY DEVICE
ef 00 03 00 42 00 ff ff 00 ff ff a0 00 03:13:25.605 SET FEATURES [Set transfer mode]
Error 419 [18] occurred at disk power-on lifetime: 8375 hours (348 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 10 00 57 64 00 54 48 e0 00 03:13:24.671 READ DMA EXT
25 00 00 00 08 00 57 65 00 54 60 e0 00 03:13:24.670 READ DMA EXT
27 00 00 00 00 00 00 00 00 00 00 e0 00 03:13:24.670 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 01 00 00 ff ff 00 ff ff a0 00 03:13:24.609 IDENTIFY DEVICE
ef 00 03 00 42 00 ff ff 00 ff ff a0 00 03:13:24.609 SET FEATURES [Set transfer mode]
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 27139 -
# 2 Short offline Aborted by host 10% 24634 -
# 3 Extended offline Completed without error 00% 24284 -
# 4 Short offline Completed without error 00% 24255 -
# 5 Short offline Completed without error 00% 24255 -
# 6 Extended offline Interrupted (host reset) 90% 24255 -
# 7 Extended offline Interrupted (host reset) 90% 24255 -
# 8 Extended offline Completed without error 00% 14764 -
# 9 Short offline Completed without error 00% 8515 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 521 (0x0209)
Device State: Active (0)
Current Temperature: 51 Celsius
Power Cycle Min/Max Temperature: --/51 Celsius
Lifetime Min/Max Temperature: --/57 Celsius
Another SCT command is executing, abort Read Data Table
(SCT ext_status_code 0xffff, action_code=4, function_code=2)
Read SCT Temperature History failed
Another SCT command is executing, abort Error Recovery Control
(SCT ext_status_code 0xffff, action_code=4, function_code=2)
SCT (Get) Error Recovery Control command failed
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 5 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
View Git Blame Copy Permalink