80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Seagate/ST3800/ST380013AS/F08C99ADF253
Andrey Ponomarenko 06d1e49c98 Update of reports (new: 3633, modified: 0)
2023-02-14 01:25:13 +03:00

240 lines
11 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.0-STABLE amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus
Device Model: ST380013AS
Serial Number: --
Firmware Version: 3.18
User Capacity: 80,026,361,856 bytes [80.0 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database 7.3/5319
ATA Version is: ATA/ATAPI-6 T13/1410D revision 2
Local Time is: Mon Jun 27 16:12:56 2022 +01
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 58) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 062 053 006 - 219458470
3 Spin_Up_Time PO---- 097 097 000 - 0
4 Start_Stop_Count -O--CK 100 100 020 - 5
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
7 Seek_Error_Rate POSR-- 068 060 030 - 249567698478
9 Power_On_Hours -O--CK 091 091 000 - 8282
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 098 098 020 - 2602
194 Temperature_Celsius -O---K 039 056 000 - 39
195 Hardware_ECC_Recovered -O-RC- 062 052 000 - 219458470
197 Current_Pending_Sector -O--C- 100 100 000 - 7
198 Offline_Uncorrectable ----C- 100 100 000 - 7
199 UDMA_CRC_Error_Count -OSRCK 200 131 000 - 611
200 Multi_Zone_Error_Rate ------ 100 253 000 - 0
202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory not supported
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 SL R/O 5 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 SL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x20 SL R/O 1 Streaming performance log [OBS-8]
0x21 SL R/O 1 Write stream error log
0x22 SL R/O 1 Read stream error log
0x23 SL R/O 1 Delayed sector log [OBS-8]
0x80-0x9f SL R/W 16 Host vendor specific log
0xa0 SL VS 1 Device vendor specific log
0xa1 SL VS 20 Device vendor specific log
0xa2 SL VS 101 Device vendor specific log
0xa8 SL VS 20 Device vendor specific log
0xa9 SL VS 1 Device vendor specific log
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log Version: 1
ATA Error Count: 1282 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1282 occurred at disk power-on lifetime: 5937 hours (247 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 f0 ff ff ff ef Error: ABRT at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c4 d8 00 df 20 60 e0 00 00:15:46.588 READ MULTIPLE
c4 d8 00 df 1f 60 e0 00 00:15:46.557 READ MULTIPLE
c4 d8 00 df 1e 60 e0 00 00:15:46.526 READ MULTIPLE
c4 d8 00 df 1d 60 e0 00 00:15:46.495 READ MULTIPLE
c4 d8 68 37 1c 60 e0 00 00:15:46.463 READ MULTIPLE
Error 1281 occurred at disk power-on lifetime: 5937 hours (247 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 02 28 c0 1b e0 Error: ICRC, ABRT 2 sectors at LBA = 0x001bc028 = 1818664
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 13 17 c0 1b e0 00 00:15:12.552 READ DMA
c8 00 1a fd bf 1b e0 00 00:15:12.551 READ DMA
c8 00 26 d7 bf 1b e0 00 00:15:12.543 READ DMA
c8 00 2c 94 5a 2f e0 00 00:15:12.543 READ DMA
c8 00 05 8f 5a 2f e0 00 00:15:12.527 READ DMA
Error 1280 occurred at disk power-on lifetime: 5937 hours (247 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 e6 c5 1c e0 Error: ICRC, ABRT 1 sectors at LBA = 0x001cc5e6 = 1885670
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 12 d5 c5 1c e0 00 00:14:42.071 READ DMA
c8 00 2e a7 c5 1c e0 00 00:14:42.070 READ DMA
c8 00 11 96 c5 1c e0 00 00:14:42.070 READ DMA
c8 00 2f 67 c5 1c e0 00 00:14:42.069 READ DMA
c8 00 10 57 c5 1c e0 00 00:14:42.805 READ DMA
Error 1279 occurred at disk power-on lifetime: 5937 hours (247 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 e6 c4 1c e0 Error: ICRC, ABRT at LBA = 0x001cc4e6 = 1885414
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 0e d9 c4 1c e0 00 00:14:42.071 READ DMA
c8 00 32 a7 c4 1c e0 00 00:14:42.070 READ DMA
c8 00 0d 9a c4 1c e0 00 00:14:42.070 READ DMA
c8 00 33 67 c4 1c e0 00 00:14:42.069 READ DMA
c8 00 0c 5b c4 1c e0 00 00:14:42.069 READ DMA
Error 1278 occurred at disk power-on lifetime: 5937 hours (247 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 23 84 be 1c e0 Error: ICRC, ABRT 35 sectors at LBA = 0x001cbe84 = 1883780
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 34 73 be 1c e0 00 00:14:13.298 READ DMA
c8 00 0c 67 be 1c e0 00 00:14:13.069 READ DMA
c8 00 33 34 be 1c e0 00 00:13:44.631 READ DMA
c8 00 0d 27 be 1c e0 00 00:13:44.630 READ DMA
c8 00 32 f5 bd 1c e0 00 00:13:44.622 READ DMA
SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 327 -
# 2 Extended offline Interrupted (host reset) 80% 308 -
# 3 Short captive Completed without error 00% 308 -
# 4 Extended offline Interrupted (host reset) 80% 308 -
# 5 Short offline Aborted by host 40% 308 -
# 6 Extended offline Interrupted (host reset) 90% 308 -
# 7 Conveyance offline Fatal or unknown error 00% 308 0
# 8 Short offline Completed without error 00% 240 -
# 9 Short offline Completed without error 00% 237 -
#10 Short offline Completed without error 00% 236 -
#11 Short offline Completed: read failure 90% 150 19684179
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Commands not supported
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11) not supported
View Git Blame Copy Permalink