mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
204 lines
9.9 KiB
Plaintext
204 lines
9.9 KiB
Plaintext
smartctl 7.3 2022-02-28 r5338 [OpenBSD 7.1 amd64] (local build)
|
|
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Model Family: Seagate Barracuda 7200.10
|
|
Device Model: ST380815AS
|
|
Serial Number: --
|
|
Firmware Version: 3.CHF
|
|
User Capacity: 80,026,361,856 bytes [80.0 GB]
|
|
Sector Size: 512 bytes logical/physical
|
|
Device is: In smartctl database 7.3/5319
|
|
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
|
|
Local Time is: Sat Jul 2 19:40:15 2022 EET
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART Status not supported: Incomplete response, ATA output registers missing
|
|
SMART overall-health self-assessment test result: PASSED
|
|
Warning: This result is based on an Attribute check.
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x82) Offline data collection activity
|
|
was completed without error.
|
|
Auto Offline Data Collection: Enabled.
|
|
Self-test execution status: ( 25) The self-test routine was aborted by
|
|
the host.
|
|
Total time to complete Offline
|
|
data collection: ( 433) seconds.
|
|
Offline data collection
|
|
capabilities: (0x5b) SMART execute Offline immediate.
|
|
Auto Offline data collection on/off support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
Offline surface scan supported.
|
|
Self-test supported.
|
|
No Conveyance Self-test supported.
|
|
Selective Self-test supported.
|
|
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
General Purpose Logging supported.
|
|
Short self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 26) minutes.
|
|
SCT capabilities: (0x0035) SCT Status supported.
|
|
SCT Feature Control supported.
|
|
SCT Data Table supported.
|
|
|
|
SMART Attributes Data Structure revision number: 10
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
|
1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail Always - 0
|
|
3 Spin_Up_Time 0x0002 098 097 000 Old_age Always - 0
|
|
4 Start_Stop_Count 0x0033 092 092 020 Pre-fail Always - 8860
|
|
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
|
|
7 Seek_Error_Rate 0x000f 086 060 030 Pre-fail Always - 415255442
|
|
9 Power_On_Hours 0x0032 042 042 000 Old_age Always - 51653
|
|
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
|
|
12 Power_Cycle_Count 0x0033 092 092 020 Pre-fail Always - 8732
|
|
184 End-to-End_Error 0x0033 100 253 097 Pre-fail Always - 0
|
|
187 Reported_Uncorrect 0x003a 001 001 000 Old_age Always - 102
|
|
189 High_Fly_Writes 0x0022 100 100 000 Old_age Always - 0
|
|
190 Airflow_Temperature_Cel 0x001a 057 050 000 Old_age Always - 43 (Min/Max 41/44)
|
|
194 Temperature_Celsius 0x0000 043 050 000 Old_age Offline - 43 (0 12 0 0 0)
|
|
195 Hardware_ECC_Recovered 0x0032 065 048 000 Old_age Always - 182402800
|
|
197 Current_Pending_Sector 0x0000 001 001 000 Old_age Offline - 4294967280
|
|
198 Offline_Uncorrectable 0x0000 100 100 000 Old_age Offline - 0
|
|
199 UDMA_CRC_Error_Count 0x0000 200 200 000 Old_age Offline - 397
|
|
|
|
SMART Error Log Version: 1
|
|
ATA Error Count: 637 (device log contains only the most recent five errors)
|
|
CR = Command Register [HEX]
|
|
FR = Features Register [HEX]
|
|
SC = Sector Count Register [HEX]
|
|
SN = Sector Number Register [HEX]
|
|
CL = Cylinder Low Register [HEX]
|
|
CH = Cylinder High Register [HEX]
|
|
DH = Device/Head Register [HEX]
|
|
DC = Device Command Register [HEX]
|
|
ER = Error register [HEX]
|
|
ST = Status register [HEX]
|
|
Powered_Up_Time is measured from power on, and printed as
|
|
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
|
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
|
|
|
Error 637 occurred at disk power-on lifetime: 49618 hours (2067 days + 10 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER ST SC SN CL CH DH
|
|
-- -- -- -- -- -- --
|
|
84 51 56 12 08 00 e0 Error: ICRC, ABRT 86 sectors at LBA = 0x00000812 = 2066
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|
-- -- -- -- -- -- -- -- ---------------- --------------------
|
|
c8 00 67 01 08 00 e0 00 00:00:13.795 READ DMA
|
|
c8 00 67 01 08 00 e0 00 00:00:13.283 READ DMA
|
|
c8 00 67 01 08 00 e0 00 00:00:12.771 READ DMA
|
|
c8 00 01 00 08 00 e0 00 00:00:12.769 READ DMA
|
|
c8 00 01 00 00 00 e0 00 00:00:12.722 READ DMA
|
|
|
|
Error 636 occurred at disk power-on lifetime: 49618 hours (2067 days + 10 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER ST SC SN CL CH DH
|
|
-- -- -- -- -- -- --
|
|
84 51 56 12 08 00 e0 Error: ICRC, ABRT 86 sectors at LBA = 0x00000812 = 2066
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|
-- -- -- -- -- -- -- -- ---------------- --------------------
|
|
c8 00 67 01 08 00 e0 00 00:00:04.391 READ DMA
|
|
c8 00 67 01 08 00 e0 00 00:00:13.283 READ DMA
|
|
c8 00 01 00 08 00 e0 00 00:00:12.771 READ DMA
|
|
c8 00 01 00 00 00 e0 00 00:00:12.769 READ DMA
|
|
c8 00 01 01 00 00 e0 00 00:00:12.722 READ DMA
|
|
|
|
Error 635 occurred at disk power-on lifetime: 49618 hours (2067 days + 10 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER ST SC SN CL CH DH
|
|
-- -- -- -- -- -- --
|
|
84 51 56 12 08 00 e0 Error: ICRC, ABRT 86 sectors at LBA = 0x00000812 = 2066
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|
-- -- -- -- -- -- -- -- ---------------- --------------------
|
|
c8 00 67 01 08 00 e0 00 00:00:04.391 READ DMA
|
|
c8 00 01 00 08 00 e0 00 00:00:04.391 READ DMA
|
|
c8 00 01 00 00 00 e0 00 00:00:12.771 READ DMA
|
|
c8 00 01 01 00 00 e0 00 00:00:12.769 READ DMA
|
|
c8 00 01 00 00 00 e0 00 00:00:12.722 READ DMA
|
|
|
|
Error 634 occurred at disk power-on lifetime: 49618 hours (2067 days + 10 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER ST SC SN CL CH DH
|
|
-- -- -- -- -- -- --
|
|
84 51 56 12 08 00 e0 Error: ICRC, ABRT 86 sectors at LBA = 0x00000812 = 2066
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|
-- -- -- -- -- -- -- -- ---------------- --------------------
|
|
c8 00 67 01 08 00 e0 00 00:00:13.791 READ DMA
|
|
c8 00 67 01 08 00 e0 00 00:00:13.270 READ DMA
|
|
c8 00 67 01 08 00 e0 00 00:00:12.749 READ DMA
|
|
c8 00 01 00 08 00 e0 00 00:00:12.744 READ DMA
|
|
c8 00 01 00 00 00 e0 00 00:00:12.707 READ DMA
|
|
|
|
Error 633 occurred at disk power-on lifetime: 49618 hours (2067 days + 10 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER ST SC SN CL CH DH
|
|
-- -- -- -- -- -- --
|
|
84 51 56 12 08 00 e0 Error: ICRC, ABRT 86 sectors at LBA = 0x00000812 = 2066
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|
-- -- -- -- -- -- -- -- ---------------- --------------------
|
|
c8 00 67 01 08 00 e0 00 00:00:04.351 READ DMA
|
|
c8 00 67 01 08 00 e0 00 00:00:13.270 READ DMA
|
|
c8 00 01 00 08 00 e0 00 00:00:12.749 READ DMA
|
|
c8 00 01 00 00 00 e0 00 00:00:12.744 READ DMA
|
|
c8 00 01 01 00 00 e0 00 00:00:12.707 READ DMA
|
|
|
|
SMART Self-test log structure revision number 1
|
|
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|
# 1 Short offline Aborted by host 90% 51521 -
|
|
# 2 Short captive Interrupted (host reset) 90% 51521 -
|
|
# 3 Short captive Interrupted (host reset) 90% 51521 -
|
|
# 4 Short offline Completed without error 00% 51384 -
|
|
# 5 Short offline Completed without error 00% 50715 -
|
|
# 6 Short offline Completed without error 00% 50643 -
|
|
# 7 Short offline Aborted by host 90% 39936 -
|
|
# 8 Short offline Completed without error 00% 39936 -
|
|
# 9 Short offline Aborted by host 70% 39925 -
|
|
#10 Extended offline Interrupted (host reset) 50% 24820 -
|
|
#11 Short offline Aborted by host 40% 24820 -
|
|
#12 Short captive Completed without error 00% 14568 -
|
|
#13 Extended offline Interrupted (host reset) 30% 1 -
|
|
#14 Short offline Aborted by host 90% 51521 -
|
|
|
|
SMART Selective self-test log data structure revision number 1
|
|
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|
1 0 0 Not_testing
|
|
2 0 0 Not_testing
|
|
3 0 0 Not_testing
|
|
4 0 0 Not_testing
|
|
5 0 0 Not_testing
|
|
Selective self-test flags (0x0):
|
|
After scanning selected spans, do NOT read-scan remainder of disk.
|
|
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|
|
|
|
|
|