mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
261 lines
12 KiB
Plaintext
261 lines
12 KiB
Plaintext
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE amd64] (local build)
|
|
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Model Family: Seagate Momentus 5400.2
|
|
Device Model: ST9100824AS
|
|
Serial Number: --
|
|
Firmware Version: 7.24
|
|
User Capacity: 100,030,242,816 bytes [100 GB]
|
|
Sector Size: 512 bytes logical/physical
|
|
Device is: In smartctl database 7.3/5528
|
|
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
|
|
Local Time is: Sat Nov 18 10:56:54 2023
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
AAM feature is: Unavailable
|
|
APM level is: 128 (minimum power consumption without standby)
|
|
Rd look-ahead is: Enabled
|
|
Write cache is: Enabled
|
|
DSN feature is: Unavailable
|
|
ATA Security is: Disabled, frozen [SEC2]
|
|
Wt Cache Reorder: Unavailable
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART overall-health self-assessment test result: PASSED
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x82) Offline data collection activity
|
|
was completed without error.
|
|
Auto Offline Data Collection: Enabled.
|
|
Self-test execution status: ( 0) The previous self-test routine completed
|
|
without error or no self-test has ever
|
|
been run.
|
|
Total time to complete Offline
|
|
data collection: ( 426) seconds.
|
|
Offline data collection
|
|
capabilities: (0x5b) SMART execute Offline immediate.
|
|
Auto Offline data collection on/off support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
Offline surface scan supported.
|
|
Self-test supported.
|
|
No Conveyance Self-test supported.
|
|
Selective Self-test supported.
|
|
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
No General Purpose Logging support.
|
|
Short self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 63) minutes.
|
|
SCT capabilities: (0x0001) SCT Status supported.
|
|
|
|
SMART Attributes Data Structure revision number: 10
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|
1 Raw_Read_Error_Rate POSR-- 118 094 006 - 171836650
|
|
3 Spin_Up_Time -O---- 095 094 000 - 0
|
|
4 Start_Stop_Count PO--CK 089 089 020 - 11654
|
|
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
|
|
7 Seek_Error_Rate POSR-- 087 060 030 - 538057046
|
|
9 Power_On_Hours -O--CK 087 087 000 - 12210
|
|
10 Spin_Retry_Count PO--C- 100 100 034 - 0
|
|
12 Power_Cycle_Count PO--CK 091 091 020 - 9762
|
|
187 Reported_Uncorrect -O--CK 001 001 000 - 125
|
|
189 High_Fly_Writes -O-RCK 072 072 000 - 28
|
|
190 Airflow_Temperature_Cel -O---K 067 046 045 - 33 (Min/Max 33/35)
|
|
192 Power-Off_Retract_Count -O--CK 098 098 000 - 4175
|
|
193 Load_Cycle_Count -O--CK 001 001 000 - 286097
|
|
194 Temperature_Celsius -O---K 033 054 000 - 33 (0 7 0 0 0)
|
|
195 Hardware_ECC_Recovered -O-RC- 069 051 000 - 146632996
|
|
197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
|
198 Offline_Uncorrectable ----C- 100 100 000 - 0
|
|
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
|
|
200 Multi_Zone_Error_Rate ------ 100 253 000 - 0
|
|
202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0
|
|
||||||_ K auto-keep
|
|
|||||__ C event count
|
|
||||___ R error rate
|
|
|||____ S speed/performance
|
|
||_____ O updated online
|
|
|______ P prefailure warning
|
|
|
|
General Purpose Log Directory not supported
|
|
|
|
SMART Log Directory Version 1 [multi-sector log support]
|
|
Address Access R/W Size Description
|
|
0x00 SL R/O 1 Log Directory
|
|
0x01 SL R/O 1 Summary SMART error log
|
|
0x02 SL R/O 5 Comprehensive SMART error log
|
|
0x03 SL R/O 5 Ext. Comprehensive SMART error log
|
|
0x06 SL R/O 1 SMART self-test log
|
|
0x07 SL R/O 1 Extended self-test log
|
|
0x09 SL R/W 1 Selective self-test log
|
|
0x10 SL R/O 1 NCQ Command Error log
|
|
0x11 SL R/O 1 SATA Phy Event Counters log
|
|
0x20 SL R/O 1 Streaming performance log
|
|
0x21 SL R/O 1 Write stream error log
|
|
0x22 SL R/O 1 Read stream error log
|
|
0x23 SL R/O 1 Delayed sector log
|
|
0x80-0x9f SL R/W 16 Host vendor specific log
|
|
0xa0 SL VS 1 Device vendor specific log
|
|
0xa1 SL VS 20 Device vendor specific log
|
|
0xa2 SL VS 101 Device vendor specific log
|
|
0xa8 SL VS 20 Device vendor specific log
|
|
0xa9 SL VS 1 Device vendor specific log
|
|
0xe0 SL R/W 1 SCT Command/Status
|
|
0xe1 SL R/W 1 SCT Data Transfer
|
|
|
|
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
|
|
|
|
SMART Error Log Version: 1
|
|
ATA Error Count: 126 (device log contains only the most recent five errors)
|
|
CR = Command Register [HEX]
|
|
FR = Features Register [HEX]
|
|
SC = Sector Count Register [HEX]
|
|
SN = Sector Number Register [HEX]
|
|
CL = Cylinder Low Register [HEX]
|
|
CH = Cylinder High Register [HEX]
|
|
DH = Device/Head Register [HEX]
|
|
DC = Device Command Register [HEX]
|
|
ER = Error register [HEX]
|
|
ST = Status register [HEX]
|
|
Powered_Up_Time is measured from power on, and printed as
|
|
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
|
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
|
|
|
Error 126 occurred at disk power-on lifetime: 10836 hours (451 days + 12 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER ST SC SN CL CH DH
|
|
-- -- -- -- -- -- --
|
|
00 00 01 01 00 00 00
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|
-- -- -- -- -- -- -- -- ---------------- --------------------
|
|
00 00 01 00 00 00 00 00 02:45:08.379 NOP [Abort queued commands]
|
|
ec 00 01 01 00 00 a0 00 02:45:08.376 IDENTIFY DEVICE
|
|
ec 00 01 01 00 00 a0 00 02:45:08.376 IDENTIFY DEVICE
|
|
ec 00 01 01 00 00 a0 00 02:45:08.365 IDENTIFY DEVICE
|
|
00 00 06 00 00 00 00 ff 02:45:08.356 NOP [Abort queued commands]
|
|
|
|
Error 125 occurred at disk power-on lifetime: 2105 hours (87 days + 17 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER ST SC SN CL CH DH
|
|
-- -- -- -- -- -- --
|
|
40 51 00 6b c1 eb 41 Error: UNC at LBA = 0x01ebc16b = 32227691
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|
-- -- -- -- -- -- -- -- ---------------- --------------------
|
|
c8 00 08 67 c1 eb 41 00 00:25:09.296 READ DMA
|
|
c8 00 01 00 00 00 40 00 00:25:08.329 READ DMA
|
|
c8 00 01 00 00 00 40 00 00:25:15.928 READ DMA
|
|
c8 00 01 00 00 00 40 00 00:25:14.936 READ DMA
|
|
ca 00 10 2f e6 18 4a 00 00:25:14.936 WRITE DMA
|
|
|
|
Error 124 occurred at disk power-on lifetime: 2105 hours (87 days + 17 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER ST SC SN CL CH DH
|
|
-- -- -- -- -- -- --
|
|
40 51 00 6b c1 eb 41 Error: UNC at LBA = 0x01ebc16b = 32227691
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|
-- -- -- -- -- -- -- -- ---------------- --------------------
|
|
c8 00 08 67 c1 eb 41 00 00:25:09.296 READ DMA
|
|
c8 00 01 00 00 00 40 00 00:25:08.329 READ DMA
|
|
c8 00 01 00 00 00 40 00 00:25:08.329 READ DMA
|
|
c8 00 08 79 2e 1e 4a 00 00:25:08.305 READ DMA
|
|
c8 00 01 00 00 00 40 00 00:25:08.295 READ DMA
|
|
|
|
Error 123 occurred at disk power-on lifetime: 2105 hours (87 days + 17 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER ST SC SN CL CH DH
|
|
-- -- -- -- -- -- --
|
|
40 51 00 6b c1 eb 41 Error: UNC at LBA = 0x01ebc16b = 32227691
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|
-- -- -- -- -- -- -- -- ---------------- --------------------
|
|
c8 00 08 67 c1 eb 41 00 00:25:09.296 READ DMA
|
|
c8 00 01 00 00 00 40 00 00:25:08.329 READ DMA
|
|
c8 00 01 00 00 00 40 00 00:25:08.329 READ DMA
|
|
c8 00 40 37 e6 18 4a 00 00:25:08.305 READ DMA
|
|
c8 00 01 00 00 00 40 00 00:25:08.295 READ DMA
|
|
|
|
Error 122 occurred at disk power-on lifetime: 2105 hours (87 days + 17 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER ST SC SN CL CH DH
|
|
-- -- -- -- -- -- --
|
|
40 51 00 6b c1 eb 41 Error: UNC at LBA = 0x01ebc16b = 32227691
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|
-- -- -- -- -- -- -- -- ---------------- --------------------
|
|
c8 00 08 67 c1 eb 41 00 00:25:05.007 READ DMA
|
|
ca 00 08 b7 8b 00 43 00 00:25:05.007 WRITE DMA
|
|
ca 00 10 27 81 00 43 00 00:25:02.442 WRITE DMA
|
|
c8 00 01 00 00 00 40 00 00:25:02.441 READ DMA
|
|
ca 00 08 bf 8b 00 43 00 00:25:02.441 WRITE DMA
|
|
|
|
SMART Extended Self-test Log (GP Log 0x07) not supported
|
|
|
|
SMART Self-test log structure revision number 1
|
|
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|
# 1 Extended offline Completed without error 00% 11623 -
|
|
# 2 Short offline Completed without error 00% 11622 -
|
|
# 3 Extended offline Interrupted (host reset) 90% 10309 -
|
|
# 4 Extended offline Interrupted (host reset) 70% 9817 -
|
|
# 5 Extended offline Interrupted (host reset) 70% 9814 -
|
|
# 6 Extended offline Completed without error 00% 9793 -
|
|
|
|
SMART Selective self-test log data structure revision number 1
|
|
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|
1 0 0 Not_testing
|
|
2 0 0 Not_testing
|
|
3 0 0 Not_testing
|
|
4 0 0 Not_testing
|
|
5 0 0 Not_testing
|
|
Selective self-test flags (0x0):
|
|
After scanning selected spans, do NOT read-scan remainder of disk.
|
|
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|
|
|
SCT Status Version: 2
|
|
SCT Version (vendor specific): 521 (0x0209)
|
|
Device State: Active (0)
|
|
Current Temperature: 33 Celsius
|
|
Power Cycle Min/Max Temperature: --/ 0 Celsius
|
|
Lifetime Min/Max Temperature: --/ 0 Celsius
|
|
|
|
SCT Data Table command not supported
|
|
|
|
SCT Error Recovery Control command not supported
|
|
|
|
Device Statistics (GP/SMART Log 0x04) not supported
|
|
|
|
Pending Defects log (GP Log 0x0c) not supported
|
|
|
|
SATA Phy Event Counters (GP Log 0x11)
|
|
ID Size Value Description
|
|
0x000a 2 22 Device-to-host register FISes sent due to a COMRESET
|
|
0x0001 2 0 Command failed due to ICRC error
|
|
0x0003 2 0 R_ERR response for device-to-host data FIS
|
|
0x0004 2 0 R_ERR response for host-to-device data FIS
|
|
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
|
|