80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Seagate/ST9160/ST9160412AS/6CF80F13A8F8
Andrey Ponomarenko 06d1e49c98 Update of reports (new: 3633, modified: 0)
2023-02-14 01:25:13 +03:00

326 lines
16 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Momentus 7200.4
Device Model: ST9160412AS
Serial Number: --
LU WWN Device Id: 5 000c50 ...
Firmware Version: 0003LVM1
User Capacity: 160,041,885,696 bytes [160 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 1.5 Gb/s (current: 1.5 Gb/s)
Local Time is: Sat Sep 17 13:04:38 2022 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unknown
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 42) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103b) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 118 099 034 - 169251466
3 Spin_Up_Time PO---- 099 099 000 - 0
4 Start_Stop_Count -O--CK 099 099 020 - 1501
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
7 Seek_Error_Rate POSR-- 072 060 030 - 17245995113
9 Power_On_Hours -O--CK 095 095 000 - 4721 (201 48 0)
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 099 099 020 - 1465
184 End-to-End_Error -O--CK 100 100 099 - 0
187 Reported_Uncorrect -O--CK 001 001 000 - 190
188 Command_Timeout -O--CK 100 099 000 - 4295032842
189 High_Fly_Writes -O-RCK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 071 045 045 Past 29 (Min/Max 18/31)
191 G-Sense_Error_Rate -O--CK 096 096 000 - 8577
192 Power-Off_Retract_Count -O--CK 100 100 000 - 1913
193 Load_Cycle_Count -O--CK 057 057 000 - 87397
194 Temperature_Celsius -O---K 029 055 000 - 29 (0 11 0 0 0)
195 Hardware_ECC_Recovered -O-RC- 064 060 000 - 169251466
196 Reallocated_Event_Count POSR-- 096 096 030 - 4137 (3314 0)
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
254 Free_Fall_Sensor -O--CK 100 100 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x02 GPL,SL R/O 5 Comprehensive SMART error log
0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 1 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL,SL R/O 1 NCQ Command Error log
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
0x21 GPL,SL R/O 1 Write stream error log
0x22 GPL,SL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 20 Device vendor specific log
0xa2 GPL VS 2248 Device vendor specific log
0xa8 GPL,SL VS 65 Device vendor specific log
0xa9 GPL,SL VS 1 Device vendor specific log
0xb0 GPL VS 2864 Device vendor specific log
0xbe-0xbf GPL VS 65535 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 174 (device log contains only the most recent 20 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 174 [13] occurred at disk power-on lifetime: 1166 hours (48 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 05 fc 00 8a 78 00 00 Error: UNC at LBA = 0x5fc008a78 = 25702730360
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 01 00 00 05 fc 00 8a 2f e0 00 19:06:57.329 READ DMA EXT
35 00 00 00 48 00 00 2a 00 1a 57 e0 00 19:06:57.174 WRITE DMA EXT
25 00 00 00 48 00 00 8c 00 5b 6f e0 00 19:06:57.164 READ DMA EXT
35 00 00 00 58 00 00 29 00 1a ff e0 00 19:06:57.161 WRITE DMA EXT
25 00 00 00 58 00 04 9b 00 02 ff e0 00 19:06:57.144 READ DMA EXT
Error 173 [12] occurred at disk power-on lifetime: 1146 hours (47 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 05 fc 00 8a 78 00 00 Error: WP at LBA = 0x5fc008a78 = 25702730360
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 08 00 00 00 00 5e 47 40 00 1d+01:06:11.854 WRITE FPDMA QUEUED
61 00 00 00 01 00 00 cb 00 13 ff 40 00 1d+01:06:11.853 WRITE FPDMA QUEUED
60 00 00 00 80 00 05 fc 00 8a 2f 40 00 1d+01:06:11.852 READ FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 40 00 1d+01:06:11.822 FLUSH CACHE EXT
61 00 00 00 08 00 00 00 00 5e 3f 40 00 1d+01:06:11.821 WRITE FPDMA QUEUED
Error 172 [11] occurred at disk power-on lifetime: 1146 hours (47 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 05 fc 00 8a 78 00 00 Error: UNC at LBA = 0x5fc008a78 = 25702730360
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 80 00 05 fc 00 8a 2f 40 00 1d+01:06:08.734 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 00 1d+01:06:08.214 READ LOG EXT
60 00 00 00 01 00 00 00 00 00 00 40 00 1d+01:06:05.364 READ FPDMA QUEUED
60 00 00 00 80 00 05 fc 00 8a 2f 40 00 1d+01:06:05.364 READ FPDMA QUEUED
61 00 00 00 01 00 00 cb 00 13 e7 40 00 1d+01:06:05.354 WRITE FPDMA QUEUED
Error 171 [10] occurred at disk power-on lifetime: 1146 hours (47 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 05 fc 00 8a 78 00 00 Error: UNC at LBA = 0x5fc008a78 = 25702730360
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 01 00 00 00 00 00 00 40 00 1d+01:06:05.364 READ FPDMA QUEUED
60 00 00 00 80 00 05 fc 00 8a 2f 40 00 1d+01:06:05.364 READ FPDMA QUEUED
61 00 00 00 01 00 00 cb 00 13 e7 40 00 1d+01:06:05.354 WRITE FPDMA QUEUED
ef 00 10 00 03 00 00 00 00 00 00 40 00 1d+01:06:05.353 SET FEATURES [Enable SATA feature]
ef 00 03 00 45 00 00 00 00 00 00 40 00 1d+01:06:05.353 SET FEATURES [Set transfer mode]
Error 170 [9] occurred at disk power-on lifetime: 1146 hours (47 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 05 fc 00 8a 78 00 00 Error: UNC at LBA = 0x5fc008a78 = 25702730360
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 80 00 05 fc 00 8a 2f 40 00 1d+01:05:44.972 READ FPDMA QUEUED
61 00 00 00 80 00 05 4c 00 d0 c7 40 00 1d+01:05:44.971 WRITE FPDMA QUEUED
60 00 00 00 80 00 0f c1 00 95 8f 40 00 1d+01:05:44.969 READ FPDMA QUEUED
61 00 00 00 80 00 05 4c 00 d0 47 40 00 1d+01:05:44.968 WRITE FPDMA QUEUED
60 00 00 00 80 00 0f c1 00 95 0f 40 00 1d+01:05:44.967 READ FPDMA QUEUED
Error 169 [8] occurred at disk power-on lifetime: 1146 hours (47 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 05 fc 00 8a 78 00 00 Error: UNC at LBA = 0x5fc008a78 = 25702730360
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 80 00 05 fc 00 8a 2f 40 00 1d+00:25:45.282 READ FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 40 00 1d+00:25:45.096 FLUSH CACHE EXT
61 00 00 00 08 00 00 00 00 5e 47 40 00 1d+00:25:45.096 WRITE FPDMA QUEUED
61 00 00 00 08 00 10 fc 00 9e 1f 40 00 1d+00:25:45.095 WRITE FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 40 00 1d+00:25:45.039 FLUSH CACHE EXT
Error 168 [7] occurred at disk power-on lifetime: 1146 hours (47 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 05 fc 00 8a 78 00 00 Error: UNC at LBA = 0x5fc008a78 = 25702730360
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 80 00 05 fc 00 8a 2f 40 00 1d+00:25:42.126 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 00 1d+00:25:41.626 READ LOG EXT
60 00 00 00 01 00 00 00 00 00 00 40 00 1d+00:25:38.740 READ FPDMA QUEUED
60 00 00 00 80 00 05 fc 00 8a 2f 40 00 1d+00:25:38.740 READ FPDMA QUEUED
61 00 00 00 01 00 00 cb 00 13 e7 40 00 1d+00:25:38.730 WRITE FPDMA QUEUED
Error 167 [6] occurred at disk power-on lifetime: 1146 hours (47 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 05 fc 00 8a 78 00 00 Error: UNC at LBA = 0x5fc008a78 = 25702730360
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 01 00 00 00 00 00 00 40 00 1d+00:25:38.740 READ FPDMA QUEUED
60 00 00 00 80 00 05 fc 00 8a 2f 40 00 1d+00:25:38.740 READ FPDMA QUEUED
61 00 00 00 01 00 00 cb 00 13 e7 40 00 1d+00:25:38.730 WRITE FPDMA QUEUED
ef 00 10 00 03 00 00 00 00 00 00 40 00 1d+00:25:38.730 SET FEATURES [Enable SATA feature]
ef 00 03 00 45 00 00 00 00 00 00 40 00 1d+00:25:38.730 SET FEATURES [Set transfer mode]
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 1244 -
# 2 Vendor (0x50) Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
Device State: Active (0)
Current Temperature: 29 Celsius
Power Cycle Min/Max Temperature: 18/31 Celsius
Lifetime Min/Max Temperature: 11/55 Celsius
Under/Over Temperature Limit Count: 0/21
Vendor specific:
00 00 00 00 00 00 00 00 00 00 02 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 10 minutes
Temperature Logging Interval: 11 minutes
Min/Max recommended Temperature: 0/ 0 Celsius
Min/Max Temperature Limit: 0/ 0 Celsius
Temperature History Size (Index): 128 (22)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 29 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
View Git Blame Copy Permalink