80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Seagate/ST9250/ST9250315AS/0DF39143C4E6
Andrey Ponomarenko 6760e6c317 Update of reports (new: 1329, modified: 0)
2023-05-01 22:53:35 +03:00

254 lines
12 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p6 amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Momentus 5400.6
Device Model: ST9250315AS
Serial Number: --
LU WWN Device Id: 5 000c50 ...
Firmware Version: 0005HPM1
User Capacity: 250,059,350,016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database 7.3/5319
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Fri Apr 14 15:15:58 2023 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 254 (maximum performance)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unknown
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 74) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 117 099 006 - 149740844
3 Spin_Up_Time -O---- 099 099 000 - 0
4 Start_Stop_Count PO--CK 095 095 000 - 5291
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
7 Seek_Error_Rate POSR-- 082 060 030 - 181932505
9 Power_On_Hours -O--CK 095 095 000 - 4432
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count PO--CK 095 095 020 - 5391
183 Runtime_Bad_Block -O--CK 100 253 000 - 0
184 End-to-End_Error PO--CK 100 100 097 - 0
187 Reported_Uncorrect -O--CK 093 093 000 - 7
188 Command_Timeout -O--CK 100 097 000 - 4295032838
189 High_Fly_Writes -O-RCK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 068 046 045 - 32 (Min/Max 27/32)
191 G-Sense_Error_Rate -O--CK 100 100 000 - 489
192 Power-Off_Retract_Count -O--CK 100 100 000 - 594
193 Load_Cycle_Count -O--CK 073 073 000 - 54444
194 Temperature_Celsius -O---K 032 054 000 - 32 (0 2 0 0 0)
195 Hardware_ECC_Recovered -O-RC- 053 040 000 - 149740844
196 Reallocated_Event_Count PO--CK 100 100 036 - 0
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x02 GPL,SL R/O 5 Comprehensive SMART error log
0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 1 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL,SL R/O 1 NCQ Command Error log
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
0x21 GPL,SL R/O 1 Write stream error log
0x22 GPL,SL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 20 Device vendor specific log
0xa2 GPL VS 2248 Device vendor specific log
0xa8 GPL,SL VS 65 Device vendor specific log
0xa9 GPL,SL VS 1 Device vendor specific log
0xb0 GPL VS 2864 Device vendor specific log
0xbe-0xbf GPL VS 65535 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 4
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 4 [3] occurred at disk power-on lifetime: 3410 hours (142 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 0f 4f ad 98 00 00 Error: UNC at LBA = 0x0f4fad98 = 256880024
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 20 00 00 0f 4f ad 80 40 00 05:58:56.474 READ FPDMA QUEUED
61 00 00 00 20 00 00 12 09 b1 c0 40 00 05:58:56.473 WRITE FPDMA QUEUED
61 00 00 00 20 00 00 0c 32 6a 00 40 00 05:58:56.473 WRITE FPDMA QUEUED
60 00 00 00 20 00 00 0f 4f ad 60 40 00 05:58:56.472 READ FPDMA QUEUED
61 00 00 00 20 00 00 12 09 b1 c0 40 00 05:58:56.471 WRITE FPDMA QUEUED
Error 3 [2] occurred at disk power-on lifetime: 2861 hours (119 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 0f 4f ad 98 00 00 Error: UNC at LBA = 0x0f4fad98 = 256880024
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 20 00 00 0f 4f ad 80 40 00 01:56:47.304 READ FPDMA QUEUED
61 00 00 00 20 00 00 0a 25 c7 00 40 00 01:56:47.304 WRITE FPDMA QUEUED
61 00 00 00 20 00 00 0a 6f ed 60 40 00 01:56:47.303 WRITE FPDMA QUEUED
60 00 00 00 20 00 00 0f 4f ad 60 40 00 01:56:47.301 READ FPDMA QUEUED
61 00 00 00 20 00 00 0a 25 c7 00 40 00 01:56:47.301 WRITE FPDMA QUEUED
Error 2 [1] occurred at disk power-on lifetime: 2523 hours (105 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 0f 4f ad 98 00 00 Error: UNC at LBA = 0x0f4fad98 = 256880024
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 20 00 00 0f 4f ad 80 40 00 00:09:12.424 READ FPDMA QUEUED
61 00 00 00 20 00 00 08 c2 98 e0 40 00 00:09:12.423 WRITE FPDMA QUEUED
61 00 00 00 20 00 00 07 8e fa a0 40 00 00:09:12.422 WRITE FPDMA QUEUED
60 00 00 00 20 00 00 0f 4f ad 60 40 00 00:09:12.422 READ FPDMA QUEUED
61 00 00 00 20 00 00 08 c2 98 e0 40 00 00:09:12.421 WRITE FPDMA QUEUED
Error 1 [0] occurred at disk power-on lifetime: 1609 hours (67 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 0f 4f ad 98 00 00 Error: UNC at LBA = 0x0f4fad98 = 256880024
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 80 00 00 0f 4f ad 08 40 00 00:01:00.167 READ FPDMA QUEUED
60 00 00 00 80 00 00 0f 4f ac 88 40 00 00:01:00.165 READ FPDMA QUEUED
60 00 00 00 80 00 00 00 12 a3 10 40 00 00:01:00.153 READ FPDMA QUEUED
60 00 00 00 80 00 00 00 12 a2 90 40 00 00:01:00.151 READ FPDMA QUEUED
60 00 00 00 10 00 00 00 07 5b e8 40 00 00:01:00.150 READ FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 4060 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
Device State: Active (0)
Current Temperature: 32 Celsius
Power Cycle Min/Max Temperature: 27/32 Celsius
Lifetime Min/Max Temperature: 2/54 Celsius
Under/Over Temperature Limit Count: 0/9
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/ 0 Celsius
Min/Max Temperature Limit: 0/ 0 Celsius
Temperature History Size (Index): 128 (105)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
View Git Blame Copy Permalink