80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Seagate/ST9320/ST9320325AS/0F7C5218BDDD
Andrey Ponomarenko 9495463568 Update of reports (new: 194, modified: 0)
2021-06-01 07:24:02 +03:00

237 lines
12 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p2 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Momentus 5400.6
Device Model: ST9320325AS
Serial Number: --
LU WWN Device Id: 5 000c50 ...
Firmware Version: 0003BSM1
User Capacity: 320,068,705,792 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 1.5 Gb/s
Local Time is: Thu May 20 10:03:14 2021 EEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Unknown
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 120) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 95) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103b) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 099 095 006 - 73279397
3 Spin_Up_Time PO---- 097 097 000 - 0
4 Start_Stop_Count -O--CK 066 066 020 - 34852
5 Reallocated_Sector_Ct PO--CK 098 098 036 - 52
7 Seek_Error_Rate POSR-- 090 060 030 - 1079228078
9 Power_On_Hours -O--CK 040 040 000 - 52762
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 098 037 020 - 2682
184 End-to-End_Error -O--CK 100 100 099 - 0
187 Reported_Uncorrect -O--CK 001 001 000 - 280
188 Command_Timeout -O--CK 100 097 000 - 8590065703
189 High_Fly_Writes -O-RCK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 066 049 045 - 34 (Min/Max 26/38)
191 G-Sense_Error_Rate -O--CK 100 100 000 - 383
192 Power-Off_Retract_Count -O--CK 100 100 000 - 20
193 Load_Cycle_Count -O--CK 001 001 000 - 1188614
194 Temperature_Celsius -O---K 034 051 000 - 34 (0 9 0 0 0)
195 Hardware_ECC_Recovered -O-RC- 051 048 000 - 73279397
197 Current_Pending_Sector -O--C- 100 100 000 - 1
198 Offline_Uncorrectable ----C- 100 100 000 - 1
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x02 GPL,SL R/O 5 Comprehensive SMART error log
0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 1 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL,SL R/O 1 NCQ Command Error log
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
0x21 GPL,SL R/O 1 Write stream error log
0x22 GPL,SL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 20 Device vendor specific log
0xa2 GPL VS 2248 Device vendor specific log
0xa8 GPL,SL VS 65 Device vendor specific log
0xa9 GPL,SL VS 1 Device vendor specific log
0xb0 GPL VS 2864 Device vendor specific log
0xbe-0xbf GPL VS 65535 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 2
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 2 [1] occurred at disk power-on lifetime: 50851 hours (2118 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 25 28 8f 6b 00 00 Error: UNC at LBA = 0x25288f6b = 623415147
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 18 00 00 25 28 8f 68 40 00 14:07:26.317 READ FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 40 00 14:07:26.303 FLUSH CACHE EXT
61 00 00 00 08 00 00 07 e8 5d f0 40 00 14:07:26.303 WRITE FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 40 00 14:07:26.285 FLUSH CACHE EXT
61 00 00 00 08 00 00 07 e8 5d e8 40 00 14:07:26.285 WRITE FPDMA QUEUED
Error 1 [0] occurred at disk power-on lifetime: 21655 hours (902 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 1e 6c 68 ec 00 00 Error: UNC at LBA = 0x1e6c68ec = 510421228
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 00 1e 6c 68 e8 40 00 46d+14:48:31.086 READ DMA EXT
25 00 00 00 08 00 00 18 d6 d9 38 40 00 46d+14:48:31.065 READ DMA EXT
25 00 00 00 08 00 00 11 c0 4a f8 40 00 46d+14:48:31.056 READ DMA EXT
25 00 00 00 20 00 00 11 c0 2b 68 40 00 46d+14:48:31.043 READ DMA EXT
25 00 00 00 30 00 00 10 8a d2 38 40 00 46d+14:48:31.031 READ DMA EXT
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 80% 52753 625013731
# 2 Short offline Completed: read failure 80% 52729 625013731
# 3 Short offline Completed: read failure 80% 52705 625013731
# 4 Short offline Completed: read failure 80% 52681 625013731
# 5 Short offline Completed: read failure 80% 52657 625013731
# 6 Short offline Completed: read failure 80% 52633 625013731
# 7 Short offline Completed: read failure 80% 52609 625013731
# 8 Short offline Completed: read failure 80% 52585 625013731
# 9 Short offline Completed: read failure 80% 52561 625013731
#10 Short offline Completed: read failure 80% 52537 625013731
#11 Short offline Completed: read failure 80% 52513 625013731
#12 Short offline Completed: read failure 80% 52489 625013731
#13 Short offline Completed: read failure 80% 52465 625013731
#14 Short offline Completed: read failure 80% 52441 625013731
#15 Short offline Completed: read failure 80% 52417 625013731
#16 Short offline Completed: read failure 80% 52393 625013731
#17 Short offline Completed: read failure 80% 52369 625013731
#18 Short offline Completed: read failure 80% 52346 625013731
#19 Short offline Completed: read failure 80% 52322 625013731
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
Device State: Active (0)
Current Temperature: 34 Celsius
Power Cycle Min/Max Temperature: 26/38 Celsius
Lifetime Min/Max Temperature: 9/51 Celsius
Under/Over Temperature Limit Count: 0/24592
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/ 0 Celsius
Min/Max Temperature Limit: 0/ 0 Celsius
Temperature History Size (Index): 128 (38)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 5 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
View Git Blame Copy Permalink