80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Seagate/ST9320/ST9320325AS/ACAAA75D16FA
Andrey Ponomarenko b1c41e7edc Update of reports (new: 3637, modified: 0)
2022-03-18 23:39:11 +03:00

319 lines
16 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Momentus 5400.6
Device Model: ST9320325AS
Serial Number: --
LU WWN Device Id: 5 000c50 ...
Firmware Version: 0003SDM1
User Capacity: 320,072,933,376 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Fri Oct 8 08:02:11 2021 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 254 (maximum performance)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unknown
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 96) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103b) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 114 089 006 - 78174502
3 Spin_Up_Time PO---- 099 098 000 - 0
4 Start_Stop_Count -O--CK 099 099 020 - 1164
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
7 Seek_Error_Rate POSR-- 076 060 030 - 4339673769
9 Power_On_Hours -O--CK 098 098 000 - 2580
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 099 099 020 - 1160
184 End-to-End_Error -O--CK 100 100 099 - 0
187 Reported_Uncorrect -O--CK 001 001 000 - 2189
188 Command_Timeout -O--CK 100 018 000 - 12885099757
189 High_Fly_Writes -O-RCK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 071 059 045 - 29 (Min/Max 18/31)
191 G-Sense_Error_Rate -O--CK 100 100 000 - 27
192 Power-Off_Retract_Count -O--CK 100 100 000 - 33
193 Load_Cycle_Count -O--CK 083 083 000 - 34332
194 Temperature_Celsius -O---K 029 041 000 - 29 (255 249 0 0 0)
195 Hardware_ECC_Recovered -O-RC- 054 050 000 - 78174502
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
254 Free_Fall_Sensor -O--CK 100 100 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x02 GPL,SL R/O 5 Comprehensive SMART error log
0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 1 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL,SL R/O 1 NCQ Command Error log
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
0x21 GPL,SL R/O 1 Write stream error log
0x22 GPL,SL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 20 Device vendor specific log
0xa2 GPL VS 2248 Device vendor specific log
0xa8 GPL,SL VS 65 Device vendor specific log
0xa9 GPL,SL VS 1 Device vendor specific log
0xb0 GPL VS 2864 Device vendor specific log
0xbe-0xbf GPL VS 65535 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 2981 (device log contains only the most recent 20 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 2981 [0] occurred at disk power-on lifetime: 1406 hours (58 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 35 00 10 0c 02 00 00 Error: UNC at LBA = 0x3500100c02 = 227634318338
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 10 00 35 00 10 0c 00 e0 00 01:08:42.720 READ DMA EXT
ec 00 00 00 00 00 00 00 00 00 00 a0 00 01:08:42.628 IDENTIFY DEVICE
25 00 00 00 10 00 35 00 10 0c 00 e0 00 01:08:40.332 READ DMA EXT
ec 00 00 00 00 00 00 00 00 00 00 a0 00 01:08:40.251 IDENTIFY DEVICE
25 00 00 00 10 00 35 00 10 0c 00 e0 00 01:08:37.911 READ DMA EXT
Error 2980 [19] occurred at disk power-on lifetime: 1406 hours (58 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 35 00 10 0c 02 00 00 Error: UNC at LBA = 0x3500100c02 = 227634318338
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 10 00 35 00 10 0c 00 e0 00 01:08:40.332 READ DMA EXT
ec 00 00 00 00 00 00 00 00 00 00 a0 00 01:08:40.251 IDENTIFY DEVICE
25 00 00 00 10 00 35 00 10 0c 00 e0 00 01:08:37.911 READ DMA EXT
ec 00 00 00 00 00 00 00 00 00 00 a0 00 01:08:37.818 IDENTIFY DEVICE
25 00 00 00 10 00 35 00 10 0c 00 e0 00 01:08:35.523 READ DMA EXT
Error 2979 [18] occurred at disk power-on lifetime: 1406 hours (58 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 35 00 10 0c 02 00 00 Error: UNC at LBA = 0x3500100c02 = 227634318338
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 10 00 35 00 10 0c 00 e0 00 01:08:37.911 READ DMA EXT
ec 00 00 00 00 00 00 00 00 00 00 a0 00 01:08:37.818 IDENTIFY DEVICE
25 00 00 00 10 00 35 00 10 0c 00 e0 00 01:08:35.523 READ DMA EXT
ec 00 00 00 00 00 00 00 00 00 00 a0 00 01:08:35.430 IDENTIFY DEVICE
25 00 00 00 10 00 35 00 10 0c 00 e0 00 01:08:33.135 READ DMA EXT
Error 2978 [17] occurred at disk power-on lifetime: 1406 hours (58 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 35 00 10 0c 02 00 00 Error: UNC at LBA = 0x3500100c02 = 227634318338
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 10 00 35 00 10 0c 00 e0 00 01:08:35.523 READ DMA EXT
ec 00 00 00 00 00 00 00 00 00 00 a0 00 01:08:35.430 IDENTIFY DEVICE
25 00 00 00 10 00 35 00 10 0c 00 e0 00 01:08:33.135 READ DMA EXT
ec 00 00 00 00 00 00 00 00 00 00 a0 00 01:08:33.052 IDENTIFY DEVICE
25 00 00 00 10 00 35 00 10 0c 00 e0 00 01:08:30.746 READ DMA EXT
Error 2977 [16] occurred at disk power-on lifetime: 1406 hours (58 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 35 00 10 0c 02 00 00 Error: UNC at LBA = 0x3500100c02 = 227634318338
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 10 00 35 00 10 0c 00 e0 00 01:08:33.135 READ DMA EXT
ec 00 00 00 00 00 00 00 00 00 00 a0 00 01:08:33.052 IDENTIFY DEVICE
25 00 00 00 10 00 35 00 10 0c 00 e0 00 01:08:30.746 READ DMA EXT
ec 00 00 00 00 00 00 00 00 00 00 a0 00 01:08:30.664 IDENTIFY DEVICE
25 00 00 00 10 00 35 00 10 0c 00 e0 00 01:08:28.369 READ DMA EXT
Error 2976 [15] occurred at disk power-on lifetime: 1406 hours (58 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 35 00 10 0c 02 00 00 Error: UNC at LBA = 0x3500100c02 = 227634318338
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 10 00 35 00 10 0c 00 e0 00 01:08:30.746 READ DMA EXT
ec 00 00 00 00 00 00 00 00 00 00 a0 00 01:08:30.664 IDENTIFY DEVICE
25 00 00 00 10 00 35 00 10 0c 00 e0 00 01:08:28.369 READ DMA EXT
ec 00 00 00 00 00 00 00 00 00 00 a0 00 01:08:28.276 IDENTIFY DEVICE
25 00 00 00 10 00 35 00 10 0c 00 e0 00 01:08:25.937 READ DMA EXT
Error 2975 [14] occurred at disk power-on lifetime: 1406 hours (58 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 35 00 10 0c 02 00 00 Error: UNC at LBA = 0x3500100c02 = 227634318338
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 10 00 35 00 10 0c 00 e0 00 01:08:28.369 READ DMA EXT
ec 00 00 00 00 00 00 00 00 00 00 a0 00 01:08:28.276 IDENTIFY DEVICE
25 00 00 00 10 00 35 00 10 0c 00 e0 00 01:08:25.937 READ DMA EXT
ec 00 00 00 00 00 00 00 00 00 00 a0 00 01:08:25.855 IDENTIFY DEVICE
25 00 00 00 10 00 35 00 10 0c 00 e0 00 01:08:23.549 READ DMA EXT
Error 2974 [13] occurred at disk power-on lifetime: 1406 hours (58 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 35 00 10 0c 02 00 00 Error: UNC at LBA = 0x3500100c02 = 227634318338
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 10 00 35 00 10 0c 00 e0 00 01:08:25.937 READ DMA EXT
ec 00 00 00 00 00 00 00 00 00 00 a0 00 01:08:25.855 IDENTIFY DEVICE
25 00 00 00 10 00 35 00 10 0c 00 e0 00 01:08:23.549 READ DMA EXT
ec 00 00 00 00 00 00 00 00 00 00 a0 00 01:08:23.455 IDENTIFY DEVICE
25 00 00 00 10 00 35 00 10 0c 00 e0 00 01:08:21.160 READ DMA EXT
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
Device State: Active (0)
Current Temperature: 29 Celsius
Power Cycle Min/Max Temperature: 18/31 Celsius
Lifetime Min/Max Temperature: -7/41 Celsius
Under/Over Temperature Limit Count: 0/347
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/ 0 Celsius
Min/Max Temperature Limit: 0/ 0 Celsius
Temperature History Size (Index): 128 (88)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 7 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
View Git Blame Copy Permalink