80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Seagate/ST9640/ST9640320AS/27B382B45A90
Andrey Ponomarenko b1c41e7edc Update of reports (new: 3637, modified: 0)
2022-03-18 23:39:11 +03:00

326 lines
16 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Momentus 5400.6
Device Model: ST9640320AS
Serial Number: --
LU WWN Device Id: 5 000c50 ...
Firmware Version: 0001SDM1
User Capacity: 640,135,028,736 bytes [640 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5799 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Mon Jun 14 12:47:30 2021 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Unknown
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 173) minutes.
Conveyance self-test routine
recommended polling time: ( 3) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 118 088 006 - 182930403
3 Spin_Up_Time PO---- 098 098 085 - 0
4 Start_Stop_Count -O--CK 089 089 020 - 11861
5 Reallocated_Sector_Ct PO--CK 099 099 036 - 35
7 Seek_Error_Rate POSR-- 066 060 030 - 279442634733
9 Power_On_Hours -O--CK 060 060 000 - 35157
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 090 090 020 - 10733
184 End-to-End_Error -O--CK 100 100 099 - 0
187 Reported_Uncorrect -O--CK 001 001 000 - 1762
188 Command_Timeout -O--CK 100 100 000 - 4295032834
189 High_Fly_Writes -O-RCK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 076 055 045 - 24 (Min/Max 23/26)
191 G-Sense_Error_Rate -O--CK 099 099 000 - 2967
192 Power-Off_Retract_Count -O--CK 100 100 000 - 23
193 Load_Cycle_Count -O--CK 001 001 000 - 2101553
194 Temperature_Celsius -O---K 024 045 000 - 24 (0 10 0 0 0)
195 Hardware_ECC_Recovered -O-RC- 044 042 000 - 182930403
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
240 Head_Flying_Hours ------ 100 253 000 - 15660 (140 233 0)
241 Total_LBAs_Written ------ 100 253 000 - 2954692297
242 Total_LBAs_Read ------ 100 253 000 - 1195962550
254 Free_Fall_Sensor ------ 100 100 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x02 GPL,SL R/O 5 Comprehensive SMART error log
0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 1 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL,SL R/O 1 NCQ Command Error log
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
0x21 GPL,SL R/O 1 Write stream error log
0x22 GPL,SL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 20 Device vendor specific log
0xa2 GPL VS 2248 Device vendor specific log
0xa8 GPL,SL VS 65 Device vendor specific log
0xa9 GPL,SL VS 1 Device vendor specific log
0xb0 GPL VS 2864 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xbe-0xbf GPL VS 65535 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 1639 (device log contains only the most recent 20 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1639 [18] occurred at disk power-on lifetime: 19545 hours (814 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 1d 06 b0 00 00 Error: UNC at LBA = 0x001d06b0 = 1902256
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 10 00 00 00 1d 06 b0 e0 00 00:41:59.755 READ DMA
c8 00 00 00 10 00 00 00 1d 06 b0 e0 00 00:41:53.569 READ DMA
c8 00 00 00 10 00 00 00 1d 06 b0 e0 00 00:41:47.373 READ DMA
c8 00 00 00 10 00 00 00 1d 06 b0 e0 00 00:41:41.300 READ DMA
c8 00 00 00 10 00 00 00 1d 03 40 e0 00 00:41:41.300 READ DMA
Error 1638 [17] occurred at disk power-on lifetime: 19545 hours (814 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 1d 06 b0 00 00 Error: UNC at LBA = 0x001d06b0 = 1902256
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 10 00 00 00 1d 06 b0 e0 00 00:41:53.569 READ DMA
c8 00 00 00 10 00 00 00 1d 06 b0 e0 00 00:41:47.373 READ DMA
c8 00 00 00 10 00 00 00 1d 06 b0 e0 00 00:41:41.300 READ DMA
c8 00 00 00 10 00 00 00 1d 03 40 e0 00 00:41:41.300 READ DMA
c8 00 00 00 10 00 00 00 1c d5 30 e0 00 00:41:41.296 READ DMA
Error 1637 [16] occurred at disk power-on lifetime: 19545 hours (814 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 1d 06 b0 00 00 Error: UNC at LBA = 0x001d06b0 = 1902256
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 10 00 00 00 1d 06 b0 e0 00 00:41:47.373 READ DMA
c8 00 00 00 10 00 00 00 1d 06 b0 e0 00 00:41:41.300 READ DMA
c8 00 00 00 10 00 00 00 1d 03 40 e0 00 00:41:41.300 READ DMA
c8 00 00 00 10 00 00 00 1c d5 30 e0 00 00:41:41.296 READ DMA
c8 00 00 00 10 00 00 00 1d 02 00 e0 00 00:41:41.296 READ DMA
Error 1636 [15] occurred at disk power-on lifetime: 19545 hours (814 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 1d 06 b0 00 00 Error: UNC at LBA = 0x001d06b0 = 1902256
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 10 00 00 00 1d 06 b0 e0 00 00:41:41.300 READ DMA
c8 00 00 00 10 00 00 00 1d 03 40 e0 00 00:41:41.300 READ DMA
c8 00 00 00 10 00 00 00 1c d5 30 e0 00 00:41:41.296 READ DMA
c8 00 00 00 10 00 00 00 1d 02 00 e0 00 00:41:41.296 READ DMA
c8 00 00 00 10 00 00 00 1c d3 80 e0 00 00:41:41.295 READ DMA
Error 1635 [14] occurred at disk power-on lifetime: 19544 hours (814 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 1d 06 b0 00 00 Error: UNC at LBA = 0x001d06b0 = 1902256
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 10 00 00 00 1d 06 b0 40 00 00:55:45.828 READ DMA EXT
25 00 00 00 10 00 00 00 1d 06 b0 40 00 00:55:39.443 READ DMA EXT
ef 00 02 00 00 00 00 00 00 00 00 00 00 00:55:39.426 SET FEATURES [Enable write cache]
ef 00 aa 00 00 00 00 00 00 00 00 00 00 00:55:39.407 SET FEATURES [Enable read look-ahead]
ef 00 03 00 46 00 00 00 00 00 00 00 00 00:55:39.394 SET FEATURES [Set transfer mode]
Error 1634 [13] occurred at disk power-on lifetime: 19544 hours (814 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 1d 06 b0 00 00 Error: UNC at LBA = 0x001d06b0 = 1902256
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 10 00 00 00 1d 06 b0 40 00 00:55:39.443 READ DMA EXT
ef 00 02 00 00 00 00 00 00 00 00 00 00 00:55:39.426 SET FEATURES [Enable write cache]
ef 00 aa 00 00 00 00 00 00 00 00 00 00 00:55:39.407 SET FEATURES [Enable read look-ahead]
ef 00 03 00 46 00 00 00 00 00 00 00 00 00:55:39.394 SET FEATURES [Set transfer mode]
00 00 00 00 00 00 00 00 00 00 00 00 ff 00:55:39.370 NOP [Abort queued commands]
Error 1633 [12] occurred at disk power-on lifetime: 19544 hours (814 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 1d 06 b0 00 00 Error: UNC at LBA = 0x001d06b0 = 1902256
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 10 00 00 00 1d 06 b0 40 00 00:55:07.371 READ DMA EXT
25 00 00 00 10 00 00 00 1d 06 b0 40 00 00:55:00.986 READ DMA EXT
ef 00 02 00 00 00 00 00 00 00 00 00 00 00:55:00.968 SET FEATURES [Enable write cache]
ef 00 aa 00 00 00 00 00 00 00 00 00 00 00:55:00.949 SET FEATURES [Enable read look-ahead]
ef 00 03 00 46 00 00 00 00 00 00 00 00 00:55:00.936 SET FEATURES [Set transfer mode]
Error 1632 [11] occurred at disk power-on lifetime: 19544 hours (814 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 1d 06 b0 00 00 Error: UNC at LBA = 0x001d06b0 = 1902256
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 10 00 00 00 1d 06 b0 40 00 00:55:00.986 READ DMA EXT
ef 00 02 00 00 00 00 00 00 00 00 00 00 00:55:00.968 SET FEATURES [Enable write cache]
ef 00 aa 00 00 00 00 00 00 00 00 00 00 00:55:00.949 SET FEATURES [Enable read look-ahead]
ef 00 03 00 46 00 00 00 00 00 00 00 00 00:55:00.936 SET FEATURES [Set transfer mode]
00 00 00 00 00 00 00 00 00 00 00 00 ff 00:55:00.912 NOP [Abort queued commands]
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
Device State: Active (0)
Current Temperature: 24 Celsius
Power Cycle Min/Max Temperature: 23/26 Celsius
Lifetime Min/Max Temperature: 10/45 Celsius
Specified Max Operating Temperature: 32 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 14/55 Celsius
Min/Max Temperature Limit: 10/60 Celsius
Temperature History Size (Index): 128 (100)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
View Git Blame Copy Permalink