80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Seagate/ST9750/ST9750420AS/F037F467E62D
Andrey Ponomarenko 06d1e49c98 Update of reports (new: 3633, modified: 0)
2023-02-14 01:25:13 +03:00

335 lines
17 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Momentus 7200.5
Device Model: ST9750420AS
Serial Number: --
LU WWN Device Id: 5 000c50 ...
Firmware Version: 0005DEM1
User Capacity: 750,156,374,016 bytes [750 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Device is: In smartctl database 7.3/5319
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Mon Nov 14 18:26:57 2022 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 151) minutes.
Conveyance self-test routine
recommended polling time: ( 3) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 117 099 006 - 158884288
3 Spin_Up_Time PO---- 098 097 085 - 0
4 Start_Stop_Count -O--CK 092 092 020 - 8595
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
7 Seek_Error_Rate POSR-- 088 060 030 - 682148641
9 Power_On_Hours -O--CK 080 080 000 - 17813
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 093 093 020 - 7498
184 End-to-End_Error -O--CK 100 100 099 - 0
187 Reported_Uncorrect -O--CK 098 098 000 - 2
188 Command_Timeout -O--CK 100 098 000 - 57
189 High_Fly_Writes -O-RCK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 053 025 045 Past 47 (Min/Max 46/47 #19196)
191 G-Sense_Error_Rate -O--CK 067 067 000 - 66818
192 Power-Off_Retract_Count -O--CK 099 099 000 - 3643
193 Load_Cycle_Count -O--CK 036 036 000 - 128642
194 Temperature_Celsius -O---K 047 075 000 - 47 (0 8 0 0 0)
195 Hardware_ECC_Recovered -O-RC- 117 099 000 - 158884288
197 Current_Pending_Sector -O--C- 100 100 000 - 8
198 Offline_Uncorrectable ----C- 100 100 000 - 8
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
240 Head_Flying_Hours ------ 100 253 000 - 17414 (68 172 0)
241 Total_LBAs_Written ------ 100 253 000 - 2067886409
242 Total_LBAs_Read ------ 100 253 000 - 757603359
254 Free_Fall_Sensor -O--CK 001 001 000 - 1266
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x02 GPL,SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 20 Device vendor specific log
0xa2 GPL VS 2248 Device vendor specific log
0xa8 GPL,SL VS 65 Device vendor specific log
0xa9 GPL,SL VS 1 Device vendor specific log
0xab GPL VS 1 Device vendor specific log
0xae GPL VS 1 Device vendor specific log
0xb0 GPL VS 2864 Device vendor specific log
0xbd GPL VS 252 Device vendor specific log
0xbe-0xbf GPL VS 65535 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 10005 (device log contains only the most recent 20 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 10005 [4] occurred at disk power-on lifetime: 13389 hours (557 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 71 00 0e 00 00 00 1d 00 80 e0 00 Device Fault; Error: ABRT
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:10:02.182 SET FEATURES [Enable write cache]
00 00 00 00 00 00 00 00 00 00 00 00 ff 00:10:02.133 NOP [Abort queued commands]
60 00 00 00 40 00 00 17 0c 5d 08 40 00 00:10:02.131 READ FPDMA QUEUED
ef 00 90 00 03 00 00 00 00 00 00 a0 00 00:10:02.094 SET FEATURES [Disable SATA feature]
ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:10:02.093 SET FEATURES [Enable write cache]
Error 10004 [3] occurred at disk power-on lifetime: 13389 hours (557 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 71 00 0e ff ff ff 90 5c f8 40 00 Device Fault; Error: ABRT at LBA = 0xffffff905cf8 = 281474969394424
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 40 00 00 17 0c 5d 08 40 00 00:10:02.131 READ FPDMA QUEUED
ef 00 90 00 03 00 00 00 00 00 00 a0 00 00:10:02.094 SET FEATURES [Disable SATA feature]
ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:10:02.093 SET FEATURES [Enable write cache]
00 00 00 00 00 00 00 00 00 00 00 00 ff 00:10:02.043 NOP [Abort queued commands]
60 00 00 00 10 00 00 13 52 78 58 40 00 00:10:02.041 READ FPDMA QUEUED
Error 10003 [2] occurred at disk power-on lifetime: 13389 hours (557 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 71 00 0e 00 00 00 1d 00 80 e0 00 Device Fault; Error: ABRT
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ef 00 90 00 03 00 00 00 00 00 00 a0 00 00:10:02.094 SET FEATURES [Disable SATA feature]
ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:10:02.093 SET FEATURES [Enable write cache]
00 00 00 00 00 00 00 00 00 00 00 00 ff 00:10:02.043 NOP [Abort queued commands]
60 00 00 00 10 00 00 13 52 78 58 40 00 00:10:02.041 READ FPDMA QUEUED
60 00 00 00 38 00 00 14 02 15 80 40 00 00:10:02.041 READ FPDMA QUEUED
Error 10002 [1] occurred at disk power-on lifetime: 13389 hours (557 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 71 00 0e 00 00 00 1d 00 80 e0 00 Device Fault; Error: ABRT
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:10:02.093 SET FEATURES [Enable write cache]
00 00 00 00 00 00 00 00 00 00 00 00 ff 00:10:02.043 NOP [Abort queued commands]
60 00 00 00 10 00 00 13 52 78 58 40 00 00:10:02.041 READ FPDMA QUEUED
60 00 00 00 38 00 00 14 02 15 80 40 00 00:10:02.041 READ FPDMA QUEUED
ef 00 90 00 03 00 00 00 00 00 00 a0 00 00:10:02.004 SET FEATURES [Disable SATA feature]
Error 10001 [0] occurred at disk power-on lifetime: 13389 hours (557 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 71 00 0e ff ff ff 90 5c f8 40 00 Device Fault; Error: ABRT at LBA = 0xffffff905cf8 = 281474969394424
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 38 00 00 14 02 15 80 40 00 00:10:02.041 READ FPDMA QUEUED
ef 00 90 00 03 00 00 00 00 00 00 a0 00 00:10:02.004 SET FEATURES [Disable SATA feature]
ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:10:02.003 SET FEATURES [Enable write cache]
00 00 00 00 00 00 00 00 00 00 00 00 ff 00:10:01.952 NOP [Abort queued commands]
60 00 00 00 08 00 00 02 38 21 20 40 00 00:10:01.950 READ FPDMA QUEUED
Error 10000 [19] occurred at disk power-on lifetime: 13389 hours (557 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 71 00 0e 00 00 00 1d 00 80 e0 00 Device Fault; Error: ABRT
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ef 00 90 00 03 00 00 00 00 00 00 a0 00 00:10:02.004 SET FEATURES [Disable SATA feature]
ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:10:02.003 SET FEATURES [Enable write cache]
00 00 00 00 00 00 00 00 00 00 00 00 ff 00:10:01.952 NOP [Abort queued commands]
60 00 00 00 08 00 00 02 38 21 20 40 00 00:10:01.950 READ FPDMA QUEUED
ef 00 90 00 03 00 00 00 00 00 00 a0 00 00:10:01.913 SET FEATURES [Disable SATA feature]
Error 9999 [18] occurred at disk power-on lifetime: 13389 hours (557 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 71 00 0e 00 00 00 1d 00 80 e0 00 Device Fault; Error: ABRT
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:10:02.003 SET FEATURES [Enable write cache]
00 00 00 00 00 00 00 00 00 00 00 00 ff 00:10:01.952 NOP [Abort queued commands]
60 00 00 00 08 00 00 02 38 21 20 40 00 00:10:01.950 READ FPDMA QUEUED
ef 00 90 00 03 00 00 00 00 00 00 a0 00 00:10:01.913 SET FEATURES [Disable SATA feature]
ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:10:01.912 SET FEATURES [Enable write cache]
Error 9998 [17] occurred at disk power-on lifetime: 13389 hours (557 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 71 00 0e ff ff ff 90 5c f8 40 00 Device Fault; Error: ABRT at LBA = 0xffffff905cf8 = 281474969394424
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 08 00 00 02 38 21 20 40 00 00:10:01.950 READ FPDMA QUEUED
ef 00 90 00 03 00 00 00 00 00 00 a0 00 00:10:01.913 SET FEATURES [Disable SATA feature]
ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:10:01.912 SET FEATURES [Enable write cache]
00 00 00 00 00 00 00 00 00 00 00 00 ff 00:10:01.862 NOP [Abort queued commands]
60 00 00 00 58 00 00 20 87 8c b0 40 00 00:10:01.859 READ FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 12206 -
# 2 Short offline Completed without error 00% 3523 -
# 3 Short offline Completed without error 00% 3515 -
# 4 Short offline Completed without error 00% 3021 -
# 5 Short offline Completed without error 00% 2377 -
# 6 Short offline Completed without error 00% 2074 -
# 7 Short offline Completed without error 00% 0 -
# 8 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
Device State: Active (0)
Current Temperature: 47 Celsius
Power Cycle Min/Max Temperature: 46/47 Celsius
Lifetime Min/Max Temperature: 0/78 Celsius
Specified Max Operating Temperature: 48 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 30 minutes
Min/Max recommended Temperature: 14/55 Celsius
Min/Max Temperature Limit: 10/60 Celsius
Temperature History Size (Index): 128 (89)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
View Git Blame Copy Permalink