mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
206 lines
9.9 KiB
Plaintext
206 lines
9.9 KiB
Plaintext
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-RELEASE amd64] (local build)
|
|
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Model Family: Toshiba P300 (CMR)
|
|
Device Model: TOSHIBA HDWD110
|
|
Serial Number: --
|
|
LU WWN Device Id: 5 000039 ...
|
|
Firmware Version: MS2OA8R0
|
|
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
|
|
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
|
Rotation Rate: 7200 rpm
|
|
Form Factor: 3.5 inches
|
|
Device is: In smartctl database 7.3/5528
|
|
ATA Version is: ATA8-ACS T13/1699-D revision 4
|
|
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
|
|
Local Time is: Sat Feb 17 12:56:01 2024
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
AAM feature is: Unavailable
|
|
APM feature is: Disabled
|
|
Rd look-ahead is: Enabled
|
|
Write cache is: Enabled
|
|
DSN feature is: Unavailable
|
|
ATA Security is: Disabled, frozen [SEC2]
|
|
Wt Cache Reorder: Enabled
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART overall-health self-assessment test result: PASSED
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x84) Offline data collection activity
|
|
was suspended by an interrupting command from host.
|
|
Auto Offline Data Collection: Enabled.
|
|
Self-test execution status: ( 0) The previous self-test routine completed
|
|
without error or no self-test has ever
|
|
been run.
|
|
Total time to complete Offline
|
|
data collection: ( 7507) seconds.
|
|
Offline data collection
|
|
capabilities: (0x5b) SMART execute Offline immediate.
|
|
Auto Offline data collection on/off support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
Offline surface scan supported.
|
|
Self-test supported.
|
|
No Conveyance Self-test supported.
|
|
Selective Self-test supported.
|
|
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
General Purpose Logging supported.
|
|
Short self-test routine
|
|
recommended polling time: ( 1) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 126) minutes.
|
|
SCT capabilities: (0x003d) SCT Status supported.
|
|
SCT Error Recovery Control supported.
|
|
SCT Feature Control supported.
|
|
SCT Data Table supported.
|
|
|
|
SMART Attributes Data Structure revision number: 16
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|
1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 1
|
|
2 Throughput_Performance P-S--- 142 142 054 - 71
|
|
3 Spin_Up_Time POS--- 125 125 024 - 184 (Average 184)
|
|
4 Start_Stop_Count -O--C- 100 100 000 - 535
|
|
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
|
|
7 Seek_Error_Rate PO-R-- 100 100 067 - 0
|
|
8 Seek_Time_Performance P-S--- 113 113 020 - 35
|
|
9 Power_On_Hours -O--C- 100 100 000 - 600
|
|
10 Spin_Retry_Count PO--C- 100 100 060 - 0
|
|
12 Power_Cycle_Count -O--CK 100 100 000 - 535
|
|
192 Power-Off_Retract_Count -O--CK 100 100 000 - 561
|
|
193 Load_Cycle_Count -O--C- 100 100 000 - 561
|
|
194 Temperature_Celsius -O---- 157 157 000 - 38 (Min/Max 17/48)
|
|
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
|
|
197 Current_Pending_Sector -O---K 100 100 000 - 0
|
|
198 Offline_Uncorrectable ---R-- 100 100 000 - 0
|
|
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0
|
|
||||||_ K auto-keep
|
|
|||||__ C event count
|
|
||||___ R error rate
|
|
|||____ S speed/performance
|
|
||_____ O updated online
|
|
|______ P prefailure warning
|
|
|
|
General Purpose Log Directory Version 1
|
|
SMART Log Directory Version 1 [multi-sector log support]
|
|
Address Access R/W Size Description
|
|
0x00 GPL,SL R/O 1 Log Directory
|
|
0x01 SL R/O 1 Summary SMART error log
|
|
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
|
0x04 GPL R/O 7 Device Statistics log
|
|
0x06 SL R/O 1 SMART self-test log
|
|
0x07 GPL R/O 1 Extended self-test log
|
|
0x08 GPL R/O 2 Power Conditions log
|
|
0x09 SL R/W 1 Selective self-test log
|
|
0x10 GPL R/O 1 NCQ Command Error log
|
|
0x11 GPL R/O 1 SATA Phy Event Counters log
|
|
0x20 GPL R/O 1 Streaming performance log
|
|
0x21 GPL R/O 1 Write stream error log
|
|
0x22 GPL R/O 1 Read stream error log
|
|
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|
0xe0 GPL,SL R/W 1 SCT Command/Status
|
|
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
|
|
|
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
|
No Errors Logged
|
|
|
|
SMART Extended Self-test Log Version: 1 (1 sectors)
|
|
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|
# 1 Short offline Completed without error 00% 1 -
|
|
# 2 Short offline Completed without error 00% 0 -
|
|
# 3 Short offline Completed without error 00% 0 -
|
|
|
|
SMART Selective self-test log data structure revision number 1
|
|
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|
1 0 0 Not_testing
|
|
2 0 0 Not_testing
|
|
3 0 0 Not_testing
|
|
4 0 0 Not_testing
|
|
5 0 0 Not_testing
|
|
Selective self-test flags (0x0):
|
|
After scanning selected spans, do NOT read-scan remainder of disk.
|
|
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|
|
|
SCT Status Version: 3
|
|
SCT Version (vendor specific): 256 (0x0100)
|
|
Device State: SMART Off-line Data Collection executing in background (4)
|
|
Current Temperature: 38 Celsius
|
|
Power Cycle Min/Max Temperature: 32/38 Celsius
|
|
Lifetime Min/Max Temperature: 17/48 Celsius
|
|
Under/Over Temperature Limit Count: 0/0
|
|
|
|
SCT Temperature History Version: 2
|
|
Temperature Sampling Period: 1 minute
|
|
Temperature Logging Interval: 1 minute
|
|
Min/Max recommended Temperature: 0/60 Celsius
|
|
Min/Max Temperature Limit: -40/70 Celsius
|
|
Temperature History Size (Index): 128 (36)
|
|
|
|
SCT Error Recovery Control:
|
|
Read: Disabled
|
|
Write: Disabled
|
|
|
|
Device Statistics (GP Log 0x04)
|
|
Page Offset Size Value Flags Description
|
|
0x01 ===== = = === == General Statistics (rev 1) ==
|
|
0x01 0x008 4 535 --- Lifetime Power-On Resets
|
|
0x01 0x010 4 600 --- Power-on Hours
|
|
0x01 0x018 6 7594289920 --- Logical Sectors Written
|
|
0x01 0x020 6 38045429 --- Number of Write Commands
|
|
0x01 0x028 6 10429349324 --- Logical Sectors Read
|
|
0x01 0x030 6 50354652 --- Number of Read Commands
|
|
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
|
|
0x03 0x008 4 597 --- Spindle Motor Power-on Hours
|
|
0x03 0x010 4 597 --- Head Flying Hours
|
|
0x03 0x018 4 561 --- Head Load Events
|
|
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
|
|
0x03 0x028 4 14 --- Read Recovery Attempts
|
|
0x03 0x030 4 2 --- Number of Mechanical Start Failures
|
|
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
|
0x04 0x008 4 7 --- Number of Reported Uncorrectable Errors
|
|
0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion
|
|
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
|
0x05 0x008 1 38 --- Current Temperature
|
|
0x05 0x010 1 36 N-- Average Short Term Temperature
|
|
0x05 0x018 1 35 N-- Average Long Term Temperature
|
|
0x05 0x020 1 48 --- Highest Temperature
|
|
0x05 0x028 1 17 --- Lowest Temperature
|
|
0x05 0x030 1 41 N-- Highest Average Short Term Temperature
|
|
0x05 0x038 1 25 N-- Lowest Average Short Term Temperature
|
|
0x05 0x040 1 38 N-- Highest Average Long Term Temperature
|
|
0x05 0x048 1 25 N-- Lowest Average Long Term Temperature
|
|
0x05 0x050 4 0 --- Time in Over-Temperature
|
|
0x05 0x058 1 60 --- Specified Maximum Operating Temperature
|
|
0x05 0x060 4 0 --- Time in Under-Temperature
|
|
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
|
|
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
|
0x06 0x008 4 4274 --- Number of Hardware Resets
|
|
0x06 0x010 4 3209 --- Number of ASR Events
|
|
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
|
|||_ C monitored condition met
|
|
||__ D supports DSN
|
|
|___ N normalized value
|
|
|
|
Pending Defects log (GP Log 0x0c) not supported
|
|
|
|
SATA Phy Event Counters (GP Log 0x11)
|
|
ID Size Value Description
|
|
0x0001 2 0 Command failed due to ICRC error
|
|
0x0002 2 0 R_ERR response for data FIS
|
|
0x0003 2 0 R_ERR response for device-to-host data FIS
|
|
0x0004 2 0 R_ERR response for host-to-device data FIS
|
|
0x0005 2 0 R_ERR response for non-data FIS
|
|
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
|
0x0009 2 12 Transition from drive PhyRdy to drive PhyNRdy
|
|
0x000a 2 11 Device-to-host register FISes sent due to a COMRESET
|
|
0x000b 2 0 CRC errors within host-to-device FIS
|
|
0x000d 2 0 Non-CRC errors within host-to-device FIS
|
|
|