80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Toshiba/MK1246/MK1246GSX/2CC26B64FB2E
Andrey Ponomarenko 2a811b67c1 Update of reports (new: 6895, modified: 16)
2025-01-05 01:57:11 +03:00

320 lines
16 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p7 amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MK..46GSX
Device Model: TOSHIBA MK1246GSX
Serial Number: --
LU WWN Device Id: 5 000039 ...
Firmware Version: LB213J
User Capacity: 120,033,041,920 bytes [120 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database 7.3/5319
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 1.5 Gb/s
Local Time is: Thu May 11 02:38:27 2023 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x85) Offline data collection activity
was aborted by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 19) The self-test routine was aborted by
the host.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 59) minutes.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
2 Throughput_Performance P-S--- 100 100 050 - 0
3 Spin_Up_Time POS--K 100 100 001 - 1116
4 Start_Stop_Count -O--CK 100 100 000 - 6536
5 Reallocated_Sector_Ct PO--CK 100 100 050 - 28
7 Seek_Error_Rate PO-R-- 100 100 050 - 0
8 Seek_Time_Performance P-S--- 100 100 050 - 0
9 Power_On_Hours -O--CK 024 024 000 - 30600
10 Spin_Retry_Count PO--CK 230 100 030 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 6495
192 Power-Off_Retract_Count -O--CK 099 099 000 - 676
193 Load_Cycle_Count -O--CK 001 001 000 - 1080468
194 Temperature_Celsius -O---K 100 100 000 - 34 (Min/Max 21/56)
196 Reallocated_Event_Count -O--CK 100 100 000 - 12
197 Current_Pending_Sector -O--CK 100 100 000 - 0
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 1
220 Disk_Shift -O---- 100 100 000 - 47
222 Loaded_Hours -O--CK 040 040 000 - 24392
223 Load_Retry_Count -O--CK 100 100 000 - 0
224 Load_Friction -O---K 100 100 000 - 0
226 Load-in_Time -OS--K 100 100 000 - 357
240 Head_Flying_Hours P----- 100 100 001 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 24
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 24 [23] occurred at disk power-on lifetime: 29781 hours (1240 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 00 09 38 ee e8 e9 00 Error: UNC 8 sectors at LBA = 0x0938eee8 = 154726120
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 08 2e 61 bf 38 ee e8 e9 00 01:39:27.190 READ DMA
ca 00 00 00 20 2e 51 9f 2e 61 a0 e7 00 01:39:27.190 WRITE DMA
ca 00 00 00 20 1a 77 28 2e 51 80 e7 00 01:39:27.189 WRITE DMA
ca 00 00 00 01 b5 19 6f 1a 77 28 e7 00 01:39:27.189 WRITE DMA
c8 00 00 00 08 9f 53 af b5 19 68 e2 00 01:39:27.175 READ DMA
Error 23 [22] occurred at disk power-on lifetime: 29781 hours (1240 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 00 09 38 ee e8 e9 00 Error: UNC 8 sectors at LBA = 0x0938eee8 = 154726120
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 08 2e 61 df 38 ee e8 e9 00 01:39:23.032 READ DMA
ca 00 00 00 20 2e 51 9f 2e 61 c0 e7 00 01:39:23.031 WRITE DMA
ca 00 00 00 20 1a 77 25 2e 51 80 e7 00 01:39:23.031 WRITE DMA
ca 00 00 00 0e b7 79 4f 1a 77 18 e7 00 01:39:23.031 WRITE DMA
c8 00 00 00 08 9f 4f 57 b7 79 48 e2 00 01:39:23.020 READ DMA
Error 22 [21] occurred at disk power-on lifetime: 29781 hours (1240 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 00 09 38 ee e8 e9 00 Error: UNC 8 sectors at LBA = 0x0938eee8 = 154726120
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 08 2e 51 9f 38 ee e8 e9 00 01:39:18.837 READ DMA
ca 00 00 00 20 a3 ea 77 2e 51 80 e7 00 01:39:18.836 WRITE DMA
c8 00 00 00 80 9f 4e 4f a3 e9 f8 e2 00 01:39:18.829 READ DMA
c8 00 00 00 18 98 18 17 9f 4e 38 e2 00 01:39:18.817 READ DMA
c8 00 00 00 08 5f 0c 1f 98 18 10 e2 00 01:39:18.807 READ DMA
Error 21 [20] occurred at disk power-on lifetime: 29781 hours (1240 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 00 09 38 ee e8 e9 00 Error: UNC 8 sectors at LBA = 0x0938eee8 = 154726120
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 08 2e 61 9f 38 ee e8 e9 00 01:39:14.699 READ DMA
ca 00 00 00 20 2e 61 7f 2e 61 80 e7 00 01:39:14.699 WRITE DMA
ca 00 00 00 20 2e 61 5f 2e 61 60 e7 00 01:39:14.698 WRITE DMA
ca 00 00 00 40 2e 51 9f 2e 61 20 e7 00 01:39:14.698 WRITE DMA
ca 00 00 00 20 b7 79 5f 2e 51 80 e7 00 01:39:14.698 WRITE DMA
Error 20 [19] occurred at disk power-on lifetime: 29781 hours (1240 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 00 09 38 ee e8 e9 00 Error: UNC 8 sectors at LBA = 0x0938eee8 = 154726120
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 08 2e 61 1f 38 ee e8 e9 00 01:39:10.520 READ DMA
ca 00 00 00 20 1a 77 3f 2e 61 00 e7 00 01:39:10.520 WRITE DMA
c8 00 00 00 40 97 a3 e7 1a 77 00 e7 00 01:39:10.499 READ DMA
c8 00 00 00 08 65 92 df 97 a3 e0 e2 00 01:39:10.484 READ DMA
c8 00 00 00 20 63 2b ff 65 92 c0 e0 00 01:39:10.461 READ DMA
Error 19 [18] occurred at disk power-on lifetime: 29781 hours (1240 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 48 00 00 09 38 ee e8 e9 00 Error: UNC 72 sectors at LBA = 0x0938eee8 = 154726120
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 48 38 ee df 38 ee e8 e9 00 01:38:58.547 READ DMA
c8 00 00 00 08 2e 60 df 38 ee d8 e9 00 01:38:58.526 READ DMA
ca 00 00 00 20 9e b3 17 2e 60 c0 e7 00 01:38:58.526 WRITE DMA
c8 00 00 00 08 9e b2 a7 9e b3 10 e2 00 01:38:58.525 READ DMA
c8 00 00 00 08 9e b2 8f 9e b2 a0 e2 00 01:38:58.525 READ DMA
Error 18 [17] occurred at disk power-on lifetime: 29781 hours (1240 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 48 00 00 09 38 ee e8 e9 00 Error: UNC 72 sectors at LBA = 0x0938eee8 = 154726120
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 50 38 ee d7 38 ee e0 e9 00 01:38:50.502 READ DMA
c8 00 00 00 08 9e b0 17 38 ee d0 e9 00 01:38:50.484 READ DMA
c8 00 00 00 08 9e b0 07 9e b0 10 e2 00 01:38:50.484 READ DMA
c8 00 00 00 10 9e 37 df 9e af f8 e2 00 01:38:50.479 READ DMA
c8 00 00 00 08 9e 37 af 9e 37 d8 e2 00 01:38:50.479 READ DMA
Error 17 [16] occurred at disk power-on lifetime: 29781 hours (1240 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 48 00 00 09 38 ee e8 e9 00 Error: UNC 72 sectors at LBA = 0x0938eee8 = 154726120
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 58 38 ee cf 38 ee d8 e9 00 01:38:42.491 READ DMA
c8 00 00 00 08 2e 51 9f 38 ee c8 e9 00 01:38:42.476 READ DMA
ca 00 00 00 20 9e 37 07 2e 51 80 e7 00 01:38:42.476 WRITE DMA
c8 00 00 00 10 9e 36 ef 9e 36 f8 e2 00 01:38:42.475 READ DMA
c8 00 00 00 08 9e 36 af 9e 36 e8 e2 00 01:38:42.475 READ DMA
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Aborted by host 30% 29647 -
# 2 Short offline Completed without error 00% 16287 -
# 3 Short offline Completed without error 00% 15555 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 1 (0x0001)
Device State: Active (0)
Current Temperature: 35 Celsius
Power Cycle Min/Max Temperature: --/44 Celsius
Lifetime Min/Max Temperature: --/56 Celsius
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/55 Celsius
Min/Max Temperature Limit: 5/55 Celsius
Temperature History Size (Index): 478 (429)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0007 4 0 R_ERR response for host-to-device non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 29 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 35 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
View Git Blame Copy Permalink