80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Toshiba/MK1255/MK1255GSX H/C2134E64AB7E
Andrey Ponomarenko 06d1e49c98 Update of reports (new: 3633, modified: 0)
2023-02-14 01:25:13 +03:00

318 lines
16 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: TOSHIBA MK1255GSX H
Serial Number: --
LU WWN Device Id: 5 000039 ...
Firmware Version: FG001Q
User Capacity: 120,034,123,776 bytes [120 GB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 1.5 Gb/s
Local Time is: Mon Nov 7 17:44:42 2022 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 45) minutes.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
2 Throughput_Performance P-S--- 100 100 050 - 0
3 Spin_Up_Time POS--K 100 100 001 - 1056
4 Start_Stop_Count -O--CK 100 100 000 - 2204
5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0
7 Seek_Error_Rate PO-R-- 100 100 050 - 0
8 Seek_Time_Performance P-S--- 100 100 050 - 0
9 Power_On_Hours -O--CK 089 089 000 - 4563
10 Spin_Retry_Count PO--CK 144 100 030 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 2100
191 G-Sense_Error_Rate -O--CK 100 100 000 - 104
192 Power-Off_Retract_Count -O--CK 100 100 000 - 51
193 Load_Cycle_Count -O--CK 088 088 000 - 128456
194 Temperature_Celsius -O---K 100 100 000 - 33 (Min/Max 16/42)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O--CK 100 100 000 - 1
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
220 Disk_Shift -O---- 100 100 000 - 87
222 Loaded_Hours -O--CK 094 094 000 - 2792
223 Load_Retry_Count -O--CK 100 100 000 - 0
224 Load_Friction -O---K 100 100 000 - 0
226 Load-in_Time -OS--K 100 100 000 - 338
240 Head_Flying_Hours P----- 100 100 001 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 324 (device log contains only the most recent 256 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 324 [67] occurred at disk power-on lifetime: 4550 hours (189 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 ea 00 00 02 01 3b 0e 62 00 Error: UNC at LBA = 0x02013b0e = 33635086
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 80 00 e8 00 00 02 01 3b 00 40 00 00:15:10.091 READ FPDMA QUEUED
60 00 80 00 e0 00 00 02 01 3a 80 40 00 00:15:10.090 READ FPDMA QUEUED
60 00 80 00 d8 00 00 02 01 3a 00 40 00 00:15:10.089 READ FPDMA QUEUED
60 00 80 00 d0 00 00 02 01 39 80 40 00 00:15:10.088 READ FPDMA QUEUED
60 00 80 00 c8 00 00 02 01 39 00 40 00 00:15:10.087 READ FPDMA QUEUED
Error 323 [66] occurred at disk power-on lifetime: 4550 hours (189 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 8a 00 00 02 01 3b 0e 62 00 Error: UNC at LBA = 0x02013b0e = 33635086
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 80 00 88 00 00 02 01 3b 00 40 00 00:07:53.329 READ FPDMA QUEUED
60 00 80 00 80 00 00 02 01 3a 80 40 00 00:07:53.328 READ FPDMA QUEUED
60 00 80 00 78 00 00 02 01 3a 00 40 00 00:07:53.327 READ FPDMA QUEUED
60 00 80 00 70 00 00 02 01 39 80 40 00 00:07:53.326 READ FPDMA QUEUED
60 00 80 00 68 00 00 02 01 39 00 40 00 00:07:53.325 READ FPDMA QUEUED
Error 322 [65] occurred at disk power-on lifetime: 4549 hours (189 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 00 02 01 3b 0e 42 00 Error: UNC 1 sectors at LBA = 0x02013b0e = 33635086
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 01 00 00 02 01 3b 0e 40 00 00:32:17.026 READ DMA EXT
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:32:17.025 IDENTIFY DEVICE
ec 00 00 01 00 01 3b 0e 00 00 00 00 00 00:32:17.024 IDENTIFY DEVICE
25 00 00 00 01 00 00 02 01 3b 0e 40 00 00:32:13.222 READ DMA EXT
25 00 00 00 01 00 00 02 01 3b 0e 40 00 00:32:09.437 READ DMA EXT
Error 321 [64] occurred at disk power-on lifetime: 4549 hours (189 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 00 02 01 3b 0e 42 00 Error: UNC 1 sectors at LBA = 0x02013b0e = 33635086
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 01 00 00 02 01 3b 0e 40 00 00:32:13.222 READ DMA EXT
25 00 00 00 01 00 00 02 01 3b 0e 40 00 00:32:09.437 READ DMA EXT
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:32:09.436 IDENTIFY DEVICE
ec 00 00 01 00 01 3b 0e 00 00 00 00 00 00:32:09.435 IDENTIFY DEVICE
25 00 00 00 01 00 00 02 01 3b 0e 40 00 00:32:05.632 READ DMA EXT
Error 320 [63] occurred at disk power-on lifetime: 4549 hours (189 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 00 02 01 3b 0e 42 00 Error: UNC 1 sectors at LBA = 0x02013b0e = 33635086
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 01 00 00 02 01 3b 0e 40 00 00:32:09.437 READ DMA EXT
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:32:09.436 IDENTIFY DEVICE
ec 00 00 01 00 01 3b 0e 00 00 00 00 00 00:32:09.435 IDENTIFY DEVICE
25 00 00 00 01 00 00 02 01 3b 0e 40 00 00:32:05.632 READ DMA EXT
25 00 00 00 01 00 00 02 01 3b 0e 40 00 00:32:01.847 READ DMA EXT
Error 319 [62] occurred at disk power-on lifetime: 4549 hours (189 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 00 02 01 3b 0e 42 00 Error: UNC 1 sectors at LBA = 0x02013b0e = 33635086
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 01 00 00 02 01 3b 0e 40 00 00:32:05.632 READ DMA EXT
25 00 00 00 01 00 00 02 01 3b 0e 40 00 00:32:01.847 READ DMA EXT
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:32:01.847 IDENTIFY DEVICE
ec 00 00 01 00 01 3b 0e 00 00 00 00 00 00:32:01.846 IDENTIFY DEVICE
25 00 00 00 01 00 00 02 01 3b 0e 40 00 00:31:58.043 READ DMA EXT
Error 318 [61] occurred at disk power-on lifetime: 4549 hours (189 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 00 02 01 3b 0e 42 00 Error: UNC 1 sectors at LBA = 0x02013b0e = 33635086
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 01 00 00 02 01 3b 0e 40 00 00:32:01.847 READ DMA EXT
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:32:01.847 IDENTIFY DEVICE
ec 00 00 01 00 01 3b 0e 00 00 00 00 00 00:32:01.846 IDENTIFY DEVICE
25 00 00 00 01 00 00 02 01 3b 0e 40 00 00:31:58.043 READ DMA EXT
25 00 00 00 01 00 00 02 01 3b 0e 40 00 00:31:54.258 READ DMA EXT
Error 317 [60] occurred at disk power-on lifetime: 4549 hours (189 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 00 02 01 3b 0e 42 00 Error: UNC 1 sectors at LBA = 0x02013b0e = 33635086
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 01 00 00 02 01 3b 0e 40 00 00:31:58.043 READ DMA EXT
25 00 00 00 01 00 00 02 01 3b 0e 40 00 00:31:54.258 READ DMA EXT
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:31:54.257 IDENTIFY DEVICE
ec 00 00 01 00 01 3b 0e 00 00 00 00 00 00:31:54.256 IDENTIFY DEVICE
25 00 00 00 01 00 00 02 01 3b 0e 40 00 00:31:50.454 READ DMA EXT
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 1 (0x0001)
Device State: Active (0)
Current Temperature: 33 Celsius
Power Cycle Min/Max Temperature: --/33 Celsius
Lifetime Min/Max Temperature: --/42 Celsius
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/55 Celsius
Min/Max Temperature Limit: 5/55 Celsius
Temperature History Size (Index): 478 (308)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0007 4 0 R_ERR response for host-to-device non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 5 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 5 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
View Git Blame Copy Permalink