80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Toshiba/MK1637/MK1637GSX/DF3110889576
Andrey Ponomarenko 22f0da8c56 Update of reports (new: 0, modified: 1434)
2023-02-16 00:05:51 +03:00

323 lines
17 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.3 2022-02-28 r5338 [FreeBSD 12.4-RELEASE amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MK..37GSX
Device Model: TOSHIBA MK1637GSX
Serial Number: --
Firmware Version: DL040D
User Capacity: 160,041,885,696 bytes [160 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database 7.3/5319
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
Local Time is: Thu Dec 22 22:54:31 2022 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM level is: 254 (maximum performance), recommended: 254
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 41) The self-test routine was interrupted
by the host with a hard or soft reset.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 92) minutes.
SCT capabilities: (0x0001) SCT Status supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
2 Throughput_Performance --S--- 100 100 000 - 0
3 Spin_Up_Time POS--K 100 100 001 - 1727
4 Start_Stop_Count -O--CK 100 100 000 - 4931
5 Reallocated_Sector_Ct PO--CK 100 100 050 - 5
7 Seek_Error_Rate -O-R-- 100 100 000 - 0
8 Seek_Time_Performance --S--- 100 100 000 - 0
9 Power_On_Hours -O--CK 001 001 000 - 44699
10 Spin_Retry_Count -O--CK 198 100 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 4317
192 Power-Off_Retract_Count -O--CK 100 100 000 - 243
193 Load_Cycle_Count -O--CK 001 001 000 - 1534755
194 Temperature_Celsius -O---K 100 100 000 - 38 (Min/Max 8/60)
196 Reallocated_Event_Count -O--CK 100 100 000 - 5
197 Current_Pending_Sector -O--CK 100 100 000 - 0
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
220 Disk_Shift -O---- 100 100 000 - 153
222 Loaded_Hours -O--CK 002 002 000 - 39411
223 Load_Retry_Count -O--CK 100 100 000 - 0
224 Load_Friction -O---K 100 100 000 - 0
226 Load-in_Time -OS--K 100 100 000 - 271
240 Head_Flying_Hours ------ 100 100 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 9
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 9 [8] occurred at disk power-on lifetime: 19070 hours (794 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 41 00 30 00 00 00 be 16 a8 40 00 Error: ICRC, ABRT at LBA = 0x00be16a8 = 12457640
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 01 00 00 28 00 00 00 be 35 a8 40 00 14:46:06.271 WRITE FPDMA QUEUED
61 01 00 00 20 00 00 00 be 34 a8 40 00 14:46:06.269 WRITE FPDMA QUEUED
61 01 00 00 d8 00 00 00 be 33 a8 40 00 14:46:06.268 WRITE FPDMA QUEUED
61 01 00 00 18 00 00 00 be 32 a8 40 00 14:46:06.266 WRITE FPDMA QUEUED
61 01 00 00 10 00 00 00 be 31 a8 40 00 14:46:06.264 WRITE FPDMA QUEUED
Error 8 [7] occurred at disk power-on lifetime: 19070 hours (794 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 41 00 30 00 00 00 be 16 a8 40 00 Error: ICRC, ABRT at LBA = 0x00be16a8 = 12457640
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 01 00 00 28 00 00 00 be 35 a8 40 00 14:46:06.271 WRITE FPDMA QUEUED
61 01 00 00 20 00 00 00 be 34 a8 40 00 14:46:06.269 WRITE FPDMA QUEUED
61 01 00 00 d8 00 00 00 be 33 a8 40 00 14:46:06.268 WRITE FPDMA QUEUED
61 01 00 00 18 00 00 00 be 32 a8 40 00 14:46:06.266 WRITE FPDMA QUEUED
61 01 00 00 10 00 00 00 be 31 a8 40 00 14:46:06.264 WRITE FPDMA QUEUED
Error 7 [6] occurred at disk power-on lifetime: 13981 hours (582 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 41 00 38 00 00 04 82 62 a8 44 00 Error: ICRC, ABRT at LBA = 0x048262a8 = 75653800
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 40 00 38 00 00 04 82 62 a8 40 00 1d+00:35:01.519 WRITE FPDMA QUEUED
61 00 40 00 30 00 00 04 b5 68 28 40 00 1d+00:35:01.519 WRITE FPDMA QUEUED
61 00 40 00 28 00 00 04 b5 67 e8 40 00 1d+00:35:01.518 WRITE FPDMA QUEUED
61 00 40 00 20 00 00 04 b5 67 a8 40 00 1d+00:35:01.518 WRITE FPDMA QUEUED
61 00 40 00 18 00 00 04 a9 82 e8 40 00 1d+00:35:01.517 WRITE FPDMA QUEUED
Error 6 [5] occurred at disk power-on lifetime: 13981 hours (582 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 41 00 38 00 00 04 82 62 a8 44 00 Error: ICRC, ABRT at LBA = 0x048262a8 = 75653800
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 40 00 38 00 00 04 82 62 a8 40 00 1d+00:35:01.519 WRITE FPDMA QUEUED
61 00 40 00 30 00 00 04 b5 68 28 40 00 1d+00:35:01.519 WRITE FPDMA QUEUED
61 00 40 00 28 00 00 04 b5 67 e8 40 00 1d+00:35:01.518 WRITE FPDMA QUEUED
61 00 40 00 20 00 00 04 b5 67 a8 40 00 1d+00:35:01.518 WRITE FPDMA QUEUED
61 00 40 00 18 00 00 04 a9 82 e8 40 00 1d+00:35:01.517 WRITE FPDMA QUEUED
Error 5 [4] occurred at disk power-on lifetime: 10036 hours (418 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 41 00 f0 00 00 06 b9 c7 68 46 00 Error: ICRC, ABRT at LBA = 0x06b9c768 = 112838504
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 40 00 00 00 00 a2 28 40 00 00:44:33.875 WRITE FPDMA QUEUED
61 00 08 00 38 00 00 00 00 04 a8 40 00 00:44:33.875 WRITE FPDMA QUEUED
61 00 40 00 30 00 00 08 b6 98 28 40 00 00:44:33.874 WRITE FPDMA QUEUED
61 00 40 00 28 00 00 06 e0 ea 28 40 00 00:44:33.873 WRITE FPDMA QUEUED
61 00 40 00 20 00 00 06 e0 e8 e8 40 00 00:44:33.873 WRITE FPDMA QUEUED
Error 4 [3] occurred at disk power-on lifetime: 10036 hours (418 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 41 00 f0 00 00 06 b9 c7 68 46 00 Error: ICRC, ABRT at LBA = 0x06b9c768 = 112838504
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 40 00 00 00 00 a2 28 40 00 00:44:33.875 WRITE FPDMA QUEUED
61 00 08 00 38 00 00 00 00 04 a8 40 00 00:44:33.875 WRITE FPDMA QUEUED
61 00 40 00 30 00 00 08 b6 98 28 40 00 00:44:33.874 WRITE FPDMA QUEUED
61 00 40 00 28 00 00 06 e0 ea 28 40 00 00:44:33.873 WRITE FPDMA QUEUED
61 00 40 00 20 00 00 06 e0 e8 e8 40 00 00:44:33.873 WRITE FPDMA QUEUED
Error 3 [2] occurred at disk power-on lifetime: 7628 hours (317 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 41 00 d8 00 00 08 6a 23 e0 48 00 Error: ICRC, ABRT at LBA = 0x086a23e0 = 141173728
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 01 00 00 d8 00 00 08 6a 23 e0 40 00 00:04:43.410 WRITE FPDMA QUEUED
61 01 00 00 d0 00 00 08 6a 22 e0 40 00 00:04:43.410 WRITE FPDMA QUEUED
61 01 00 00 c8 00 00 08 6a 21 e0 40 00 00:04:43.410 WRITE FPDMA QUEUED
61 01 00 00 c0 00 00 08 6a 20 e0 40 00 00:04:43.410 WRITE FPDMA QUEUED
61 01 00 00 b8 00 00 08 6a 1f e0 40 00 00:04:43.410 WRITE FPDMA QUEUED
Error 2 [1] occurred at disk power-on lifetime: 7628 hours (317 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 41 00 d8 00 00 08 6a 23 e0 48 00 Error: ICRC, ABRT at LBA = 0x086a23e0 = 141173728
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 01 00 00 d8 00 00 08 6a 23 e0 40 00 00:04:43.410 WRITE FPDMA QUEUED
61 01 00 00 d0 00 00 08 6a 22 e0 40 00 00:04:43.410 WRITE FPDMA QUEUED
61 01 00 00 c8 00 00 08 6a 21 e0 40 00 00:04:43.410 WRITE FPDMA QUEUED
61 01 00 00 c0 00 00 08 6a 20 e0 40 00 00:04:43.410 WRITE FPDMA QUEUED
61 01 00 00 b8 00 00 08 6a 1f e0 40 00 00:04:43.410 WRITE FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended captive Interrupted (host reset) 90% 44820 -
# 2 Extended offline Aborted by host 90% 44820 -
# 3 Extended offline Completed without error 00% 39229 -
# 4 Extended offline Completed without error 00% 33331 -
# 5 Short offline Completed without error 00% 28751 -
# 6 Short offline Completed without error 00% 24697 -
# 7 Extended offline Completed without error 00% 16566 -
# 8 Extended offline Interrupted (host reset) 80% 16563 -
# 9 Extended offline Completed without error 00% 15717 -
#10 Extended offline Completed without error 00% 8627 -
#11 Extended captive Interrupted (host reset) 90% 8618 -
#12 Extended captive Interrupted (host reset) 90% 8616 -
#13 Extended offline Completed without error 00% 8578 -
#14 Short offline Completed without error 00% 8072 -
#15 Short offline Interrupted (host reset) 10% 8072 -
#16 Short offline Completed without error 00% 7764 -
#17 Short offline Interrupted (host reset) 50% 6128 -
#18 Short offline Completed without error 00% 5124 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 1 (0x0001)
Device State: Active (0)
Current Temperature: 38 Celsius
Power Cycle Min/Max Temperature: --/42 Celsius
Lifetime Min/Max Temperature: --/60 Celsius
SCT Data Table command not supported
SCT Error Recovery Control command not supported
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0007 4 0 R_ERR response for host-to-device non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 5 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 12 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
View Git Blame Copy Permalink