mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
265 lines
13 KiB
Plaintext
265 lines
13 KiB
Plaintext
smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE amd64] (local build)
|
|
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Model Family: Toshiba 2.5" HDD MK..55GSX
|
|
Device Model: TOSHIBA MK1655GSX
|
|
Serial Number: --
|
|
LU WWN Device Id: 5 000039 ...
|
|
Firmware Version: FG011M
|
|
User Capacity: 160,041,885,696 bytes [160 GB]
|
|
Sector Size: 512 bytes logical/physical
|
|
Device is: In smartctl database [for details use: -P show]
|
|
ATA Version is: ATA8-ACS (minor revision not indicated)
|
|
SATA Version is: SATA 2.6, 3.0 Gb/s
|
|
Local Time is: Mon Jan 17 16:19:20 2022 EST
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
AAM feature is: Unavailable
|
|
APM level is: 128 (minimum power consumption without standby)
|
|
Rd look-ahead is: Enabled
|
|
Write cache is: Enabled
|
|
DSN feature is: Unavailable
|
|
ATA Security is: Disabled, frozen [SEC2]
|
|
Wt Cache Reorder: Enabled
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART overall-health self-assessment test result: PASSED
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x00) Offline data collection activity
|
|
was never started.
|
|
Auto Offline Data Collection: Disabled.
|
|
Self-test execution status: ( 0) The previous self-test routine completed
|
|
without error or no self-test has ever
|
|
been run.
|
|
Total time to complete Offline
|
|
data collection: ( 120) seconds.
|
|
Offline data collection
|
|
capabilities: (0x5b) SMART execute Offline immediate.
|
|
Auto Offline data collection on/off support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
Offline surface scan supported.
|
|
Self-test supported.
|
|
No Conveyance Self-test supported.
|
|
Selective Self-test supported.
|
|
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
General Purpose Logging supported.
|
|
Short self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 74) minutes.
|
|
SCT capabilities: (0x0039) SCT Status supported.
|
|
SCT Error Recovery Control supported.
|
|
SCT Feature Control supported.
|
|
SCT Data Table supported.
|
|
|
|
SMART Attributes Data Structure revision number: 16
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
|
|
2 Throughput_Performance P-S--- 100 100 050 - 0
|
|
3 Spin_Up_Time POS--K 100 100 001 - 982
|
|
4 Start_Stop_Count -O--CK 100 100 000 - 6906
|
|
5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0
|
|
7 Seek_Error_Rate PO-R-- 100 100 050 - 0
|
|
8 Seek_Time_Performance P-S--- 100 100 050 - 0
|
|
9 Power_On_Hours -O--CK 073 073 000 - 11027
|
|
10 Spin_Retry_Count PO--CK 237 100 030 - 0
|
|
12 Power_Cycle_Count -O--CK 100 100 000 - 4464
|
|
191 G-Sense_Error_Rate -O--CK 100 100 000 - 184
|
|
192 Power-Off_Retract_Count -O--CK 100 100 000 - 2344026318
|
|
193 Load_Cycle_Count -O--CK 085 085 000 - 153278
|
|
194 Temperature_Celsius -O---K 100 100 000 - 31 (Min/Max 6/48)
|
|
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
|
|
197 Current_Pending_Sector -O--CK 100 100 000 - 0
|
|
198 Offline_Uncorrectable ----CK 100 100 000 - 0
|
|
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
|
|
220 Disk_Shift -O---- 100 100 000 - 61
|
|
222 Loaded_Hours -O--CK 092 092 000 - 3574
|
|
223 Load_Retry_Count -O--CK 100 100 000 - 0
|
|
224 Load_Friction -O---K 100 100 000 - 0
|
|
226 Load-in_Time -OS--K 100 100 000 - 356
|
|
240 Head_Flying_Hours P----- 100 100 001 - 0
|
|
||||||_ K auto-keep
|
|
|||||__ C event count
|
|
||||___ R error rate
|
|
|||____ S speed/performance
|
|
||_____ O updated online
|
|
|______ P prefailure warning
|
|
|
|
General Purpose Log Directory Version 1
|
|
SMART Log Directory Version 1 [multi-sector log support]
|
|
Address Access R/W Size Description
|
|
0x00 GPL,SL R/O 1 Log Directory
|
|
0x01 SL R/O 1 Summary SMART error log
|
|
0x02 SL R/O 51 Comprehensive SMART error log
|
|
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
|
|
0x06 SL R/O 1 SMART self-test log
|
|
0x07 GPL R/O 1 Extended self-test log
|
|
0x09 SL R/W 1 Selective self-test log
|
|
0x10 GPL R/O 1 NCQ Command Error log
|
|
0x11 GPL R/O 1 SATA Phy Event Counters log
|
|
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|
0xe0 GPL,SL R/W 1 SCT Command/Status
|
|
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
|
|
|
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
|
Device Error Count: 4
|
|
CR = Command Register
|
|
FEATR = Features Register
|
|
COUNT = Count (was: Sector Count) Register
|
|
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
|
LH = LBA High (was: Cylinder High) Register ] LBA
|
|
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
|
LL = LBA Low (was: Sector Number) Register ]
|
|
DV = Device (was: Device/Head) Register
|
|
DC = Device Control Register
|
|
ER = Error register
|
|
ST = Status register
|
|
Powered_Up_Time is measured from power on, and printed as
|
|
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
|
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
|
|
|
Error 4 [3] occurred at disk power-on lifetime: 2850 hours (118 days + 18 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
|
-- -- -- == -- == == == -- -- -- -- --
|
|
04 -- 51 00 ff c2 4f ff c2 4f ff a0 00
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
|
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
|
f6 03 03 00 00 c2 4f ff c2 4f ff a0 00 00:01:04.288 SECURITY DISABLE PASSWORD
|
|
f1 03 03 00 01 c2 4f ff c2 4f ff a0 00 00:01:03.813 SECURITY SET PASSWORD
|
|
ec 03 03 00 01 c2 4f ff c2 4f ff a0 00 00:01:03.812 IDENTIFY DEVICE
|
|
ec 03 03 00 01 c2 4f ff c2 4f ff a0 00 00:01:03.079 IDENTIFY DEVICE
|
|
ec 03 03 00 01 c2 4f ff c2 4f ff a0 00 00:01:02.687 IDENTIFY DEVICE
|
|
|
|
Error 3 [2] occurred at disk power-on lifetime: 2245 hours (93 days + 13 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
|
-- -- -- == -- == == == -- -- -- -- --
|
|
04 -- 51 00 00 c2 4f ff c2 4f ff a0 00
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
|
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
|
f2 03 03 00 01 c2 4f ff c2 4f ff a0 00 00:00:15.955 SECURITY UNLOCK
|
|
ec 03 03 00 00 c2 4f ff c2 4f ff a0 00 00:00:15.953 IDENTIFY DEVICE
|
|
f2 03 03 00 01 c2 4f ff c2 4f ff a0 00 00:00:15.750 SECURITY UNLOCK
|
|
ec 03 03 00 01 c2 4f ff c2 4f ff a0 00 00:00:15.749 IDENTIFY DEVICE
|
|
ec 03 03 00 00 c2 4f ff c2 4f ff a0 00 00:00:15.748 IDENTIFY DEVICE
|
|
|
|
Error 2 [1] occurred at disk power-on lifetime: 2245 hours (93 days + 13 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
|
-- -- -- == -- == == == -- -- -- -- --
|
|
04 -- 51 00 00 c2 4f ff c2 4f ff a0 00
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
|
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
|
f2 03 03 00 01 c2 4f ff c2 4f ff a0 00 00:00:15.750 SECURITY UNLOCK
|
|
ec 03 03 00 01 c2 4f ff c2 4f ff a0 00 00:00:15.749 IDENTIFY DEVICE
|
|
ec 03 03 00 00 c2 4f ff c2 4f ff a0 00 00:00:15.748 IDENTIFY DEVICE
|
|
e3 03 03 45 00 c2 4f ff c2 4f ff e0 00 00:00:06.513 IDLE
|
|
ef 03 03 0c 45 c2 4f ff c2 4f ff e0 00 00:00:06.468 SET FEATURES [Set transfer mode]
|
|
|
|
Error 1 [0] occurred at disk power-on lifetime: 2112 hours (88 days + 0 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
|
-- -- -- == -- == == == -- -- -- -- --
|
|
04 -- 51 00 ff c2 4f ff c2 4f ff a0 00
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
|
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
|
f6 03 03 00 00 c2 4f ff c2 4f ff a0 00 00:06:41.894 SECURITY DISABLE PASSWORD
|
|
f1 03 03 00 01 c2 4f ff c2 4f ff a0 00 00:06:41.385 SECURITY SET PASSWORD
|
|
ec 03 03 00 01 c2 4f ff c2 4f ff a0 00 00:06:41.383 IDENTIFY DEVICE
|
|
ec 03 03 00 01 c2 4f ff c2 4f ff a0 00 00:06:36.084 IDENTIFY DEVICE
|
|
ec 03 03 00 01 c2 4f ff c2 4f ff a0 00 00:06:35.419 IDENTIFY DEVICE
|
|
|
|
SMART Extended Self-test Log Version: 1 (1 sectors)
|
|
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|
# 1 Short offline Completed without error 00% 10605 -
|
|
# 2 Short offline Completed without error 00% 5958 -
|
|
# 3 Short offline Completed without error 00% 5953 -
|
|
# 4 Short offline Completed without error 00% 5929 -
|
|
# 5 Short offline Completed without error 00% 5915 -
|
|
# 6 Short offline Completed without error 00% 5902 -
|
|
# 7 Short offline Completed without error 00% 5888 -
|
|
# 8 Short offline Completed without error 00% 5875 -
|
|
# 9 Short offline Completed without error 00% 5851 -
|
|
#10 Short offline Completed without error 00% 5839 -
|
|
#11 Short offline Completed without error 00% 5826 -
|
|
#12 Short offline Completed without error 00% 5434 -
|
|
|
|
SMART Selective self-test log data structure revision number 1
|
|
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|
1 0 0 Not_testing
|
|
2 0 0 Not_testing
|
|
3 0 0 Not_testing
|
|
4 0 0 Not_testing
|
|
5 0 0 Not_testing
|
|
Selective self-test flags (0x0):
|
|
After scanning selected spans, do NOT read-scan remainder of disk.
|
|
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|
|
|
SCT Status Version: 2
|
|
SCT Version (vendor specific): 1 (0x0001)
|
|
Device State: Active (0)
|
|
Current Temperature: 31 Celsius
|
|
Power Cycle Min/Max Temperature: --/31 Celsius
|
|
Lifetime Min/Max Temperature: --/48 Celsius
|
|
|
|
SCT Temperature History Version: 2
|
|
Temperature Sampling Period: 1 minute
|
|
Temperature Logging Interval: 1 minute
|
|
Min/Max recommended Temperature: 5/55 Celsius
|
|
Min/Max Temperature Limit: 5/55 Celsius
|
|
Temperature History Size (Index): 478 (274)
|
|
|
|
SCT Error Recovery Control:
|
|
Read: Disabled
|
|
Write: Disabled
|
|
|
|
Device Statistics (GP/SMART Log 0x04) not supported
|
|
|
|
Pending Defects log (GP Log 0x0c) not supported
|
|
|
|
SATA Phy Event Counters (GP Log 0x11)
|
|
ID Size Value Description
|
|
0x0001 4 0 Command failed due to ICRC error
|
|
0x0002 4 0 R_ERR response for data FIS
|
|
0x0003 4 0 R_ERR response for device-to-host data FIS
|
|
0x0004 4 0 R_ERR response for host-to-device data FIS
|
|
0x0005 4 0 R_ERR response for non-data FIS
|
|
0x0006 4 0 R_ERR response for device-to-host non-data FIS
|
|
0x0007 4 0 R_ERR response for host-to-device non-data FIS
|
|
0x0008 4 0 Device-to-host non-data FIS retries
|
|
0x0009 4 13380 Transition from drive PhyRdy to drive PhyNRdy
|
|
0x000a 4 179 Device-to-host register FISes sent due to a COMRESET
|
|
0x000b 4 0 CRC errors within host-to-device FIS
|
|
0x000d 4 0 Non-CRC errors within host-to-device FIS
|
|
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
|
|
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
|
|
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
|
|
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
|
|
|
|
|
|