80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Toshiba/MK2552/MK2552GSX/9F78DB71F341
Andrey Ponomarenko 2a811b67c1 Update of reports (new: 6895, modified: 16)
2025-01-05 01:57:11 +03:00

324 lines
16 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p2 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MK..52GSX
Device Model: TOSHIBA MK2552GSX
Serial Number: --
LU WWN Device Id: 5 000039 ...
Firmware Version: LV011C
User Capacity: 250,059,350,016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database 7.3/5528
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Mon Aug 5 19:53:44 2024 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Write SCT (Get) Feature Control Command failed: Input/output error
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x51) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 100) minutes.
SCT capabilities: (0x0033) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 100 100 050 - 0
2 Throughput_Performance POS--- 100 100 050 - 0
3 Spin_Up_Time PO---- 100 100 002 - 1641
4 Start_Stop_Count -O--CK 100 100 000 - 6028
5 Reallocated_Sector_Ct PO--CK 040 040 010 - 1230
7 Seek_Error_Rate POSR-- 100 100 050 - 0
8 Seek_Time_Performance P-S--- 100 100 050 - 0
9 Power_On_Hours -O--CK 044 043 000 - 22564
10 Spin_Retry_Count PO--C- 220 100 030 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 5719
184 End-to-End_Error -O--CK 001 001 001 NOW 2382
187 Reported_Uncorrect -O--CK 001 001 000 - 2382
188 Command_Timeout -O--CK 100 097 000 - 45
189 High_Fly_Writes -O-RCK 100 100 001 - 0
190 Airflow_Temperature_Cel -O---K 060 024 045 Past 40 (Min/Max 38/40)
191 G-Sense_Error_Rate -O--CK 100 100 000 - 1706
192 Power-Off_Retract_Count -O--CK 099 099 000 - 45154993
193 Load_Cycle_Count -O--CK 057 057 000 - 439890
194 Temperature_Celsius -O---K 100 100 000 - 40 (Min/Max 7/76)
196 Reallocated_Event_Count -O--CK 100 100 000 - 151
197 Current_Pending_Sector -O--C- 100 100 000 - 119
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 253 000 - 0
220 Disk_Shift -O---- 100 100 000 - 55
222 Loaded_Hours -O--CK 058 058 000 - 17025
223 Load_Retry_Count -O--CK 100 100 000 - 0
224 Load_Friction -O---K 100 100 000 - 0
226 Load-in_Time -OS--K 100 100 000 - 352
240 Head_Flying_Hours P----- 100 100 001 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 2707 (device log contains only the most recent 256 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 2707 [146] occurred at disk power-on lifetime: 20528 hours (855 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 9f 00 00 03 87 ed c0 e3 00 Error: UNC 159 sectors at LBA = 0x0387edc0 = 59239872
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 00 87 ed 5e 87 ed 5f e3 00 02:25:33.636 READ DMA
c8 00 00 00 00 87 ec 5e 87 ec 5f e3 00 02:25:33.634 READ DMA
25 00 00 02 00 00 00 03 87 ea 5f e0 00 02:25:33.630 READ DMA EXT
c8 00 00 00 00 87 e9 5e 87 e9 5f e3 00 02:25:33.628 READ DMA
c8 00 00 00 00 87 e8 5e 87 e8 5f e3 00 02:25:33.624 READ DMA
Error 2706 [145] occurred at disk power-on lifetime: 20528 hours (855 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 01 03 00 00 03 87 e3 5c e3 00 Error: UNC 259 sectors at LBA = 0x0387e35c = 59237212
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 02 00 00 00 03 87 e2 5f e0 00 02:25:29.599 READ DMA EXT
c8 00 00 00 00 87 e1 5e 87 e1 5f e3 00 02:25:29.597 READ DMA
c8 00 00 b7 00 87 de a8 87 e0 5f e3 00 02:25:29.557 READ DMA
25 00 00 02 00 00 00 03 87 de 5f e0 00 02:25:21.659 READ DMA EXT
25 00 00 02 00 00 00 03 87 dc 5f e0 00 02:25:21.656 READ DMA EXT
Error 2705 [144] occurred at disk power-on lifetime: 20528 hours (855 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 01 b7 00 00 03 87 de a8 e3 00 Error: UNC 439 sectors at LBA = 0x0387dea8 = 59236008
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 02 00 00 00 03 87 de 5f e0 00 02:25:21.659 READ DMA EXT
25 00 00 02 00 00 00 03 87 dc 5f e0 00 02:25:21.656 READ DMA EXT
ca 00 00 00 08 5b a9 6e 5b a9 9f ee 00 02:25:21.656 WRITE DMA
ca 00 00 00 08 5b a9 2e 5b a9 67 ee 00 02:25:21.655 WRITE DMA
ca 00 00 00 10 5b a9 0e 5b a9 1f ee 00 02:25:21.655 WRITE DMA
Error 2704 [143] occurred at disk power-on lifetime: 20528 hours (855 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 6b 00 00 03 87 d9 f4 e3 00 Error: UNC 107 sectors at LBA = 0x0387d9f4 = 59234804
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 00 87 d9 5e 87 d9 5f e3 00 02:25:13.501 READ DMA
c8 00 00 00 00 87 d8 5e 87 d8 5f e3 00 02:25:13.498 READ DMA
25 00 00 02 00 00 00 03 87 d6 5f e0 00 02:25:13.493 READ DMA EXT
c8 00 00 1f 00 87 d5 40 87 d5 5f e3 00 02:25:08.377 READ DMA
c8 00 00 00 00 87 d4 5e 87 d4 5f e3 00 02:25:04.299 READ DMA
Error 2703 [142] occurred at disk power-on lifetime: 20528 hours (855 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 1f 00 00 03 87 d5 40 e3 00 Error: UNC 31 sectors at LBA = 0x0387d540 = 59233600
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 00 87 d4 5e 87 d4 5f e3 00 02:25:04.299 READ DMA
25 00 00 02 00 00 00 03 87 d2 5f e0 00 02:25:04.295 READ DMA EXT
c8 00 00 d3 00 87 d0 8c 87 d1 5f e3 00 02:25:02.332 READ DMA
c8 00 00 00 00 87 d0 5e 87 d0 5f e3 00 02:24:52.801 READ DMA
25 00 00 02 00 00 00 03 87 ce 5f e0 00 02:24:52.797 READ DMA EXT
Error 2702 [141] occurred at disk power-on lifetime: 20528 hours (855 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 d3 00 00 03 87 d0 8c e3 00 Error: UNC 211 sectors at LBA = 0x0387d08c = 59232396
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 00 87 d0 5e 87 d0 5f e3 00 02:24:52.801 READ DMA
25 00 00 02 00 00 00 03 87 ce 5f e0 00 02:24:52.797 READ DMA EXT
c8 00 00 00 00 61 4b 0e 87 cd 5f e3 00 02:24:52.794 READ DMA
ca 00 00 00 08 5b 76 de 61 4b 07 e0 00 02:24:52.794 WRITE DMA
ca 00 00 00 08 87 cd 5e 5b 76 d7 ee 00 02:24:52.794 WRITE DMA
Error 2701 [140] occurred at disk power-on lifetime: 20528 hours (855 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 87 00 00 03 87 cb d8 e3 00 Error: UNC 135 sectors at LBA = 0x0387cbd8 = 59231192
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 02 00 00 00 03 87 ca 5f e0 00 02:24:44.842 READ DMA EXT
c8 00 00 00 00 87 c9 5e 87 c9 5f e3 00 02:24:44.840 READ DMA
c8 00 00 00 00 87 c8 5e 87 c8 5f e3 00 02:24:44.839 READ DMA
25 00 00 02 00 00 00 03 87 c6 5f e0 00 02:24:44.784 READ DMA EXT
c8 00 00 00 00 87 c5 5e 87 c5 5f e3 00 02:24:44.782 READ DMA
Error 2700 [139] occurred at disk power-on lifetime: 20528 hours (855 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 e8 00 00 03 8f e0 57 e3 00 Error: UNC 232 sectors at LBA = 0x038fe057 = 59760727
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 02 00 00 00 03 8f df 3f e0 00 02:24:40.586 READ DMA EXT
c8 00 00 00 00 8f de 3e 8f de 3f e3 00 02:24:40.584 READ DMA
c8 00 00 9c 00 8f db a3 8f dd 3f e3 00 02:24:40.564 READ DMA
25 00 00 02 00 00 00 03 8f db 3f e0 00 02:24:36.564 READ DMA EXT
c8 00 00 00 00 8f da 3e 8f da 3f e3 00 02:24:36.563 READ DMA
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 20946 474919
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 1 (0x0001)
Device State: Active (0)
Current Temperature: 40 Celsius
Power Cycle Min/Max Temperature: 38/40 Celsius
Lifetime Min/Max Temperature: 7/76 Celsius
Under/Over Temperature Limit Count: 0/295921
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/55 Celsius
Min/Max Temperature Limit: 5/55 Celsius
Temperature History Size (Index): 478 (340)
SCT Error Recovery Control command not supported
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0007 4 0 R_ERR response for host-to-device non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 7 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 7 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
View Git Blame Copy Permalink