80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Toshiba/MK2565/MK2565GSX/B96943565BA0
Andrey Ponomarenko 2a811b67c1 Update of reports (new: 6895, modified: 16)
2025-01-05 01:57:11 +03:00

322 lines
16 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p5 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MK..65GSX
Device Model: TOSHIBA MK2565GSX
Serial Number: --
LU WWN Device Id: 5 000039 ...
Firmware Version: GJ002J
User Capacity: 250,059,350,016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database 7.3/5528
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Mon Dec 4 20:27:30 2023 -03
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 85) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
2 Throughput_Performance P-S--- 100 100 050 - 0
3 Spin_Up_Time POS--K 100 100 001 - 1165
4 Start_Stop_Count -O--CK 100 100 000 - 5130
5 Reallocated_Sector_Ct PO--CK 100 100 050 - 4
7 Seek_Error_Rate PO-R-- 100 100 050 - 0
8 Seek_Time_Performance P-S--- 100 100 050 - 0
9 Power_On_Hours -O--CK 089 089 000 - 4411
10 Spin_Retry_Count PO--CK 202 100 030 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 2761
191 G-Sense_Error_Rate -O--CK 100 100 000 - 2543
192 Power-Off_Retract_Count -O--CK 100 100 000 - 79
193 Load_Cycle_Count -O--CK 096 096 000 - 41258
194 Temperature_Celsius -O---K 100 100 000 - 42 (Min/Max 9/54)
196 Reallocated_Event_Count -O--CK 100 100 000 - 4
197 Current_Pending_Sector -O--CK 100 100 000 - 1
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
220 Disk_Shift -O---- 100 100 000 - 62
222 Loaded_Hours -O--CK 092 092 000 - 3545
223 Load_Retry_Count -O--CK 100 100 000 - 0
224 Load_Friction -O---K 100 100 000 - 0
226 Load-in_Time -OS--K 100 100 000 - 338
240 Head_Flying_Hours P----- 100 100 001 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 12
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 12 [11] occurred at disk power-on lifetime: 4320 hours (180 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 02 00 00 0f bf fb a6 6f 00 Error: UNC at LBA = 0x0fbffba6 = 264240038
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 01 00 00 00 00 0f bf fb a6 40 08 06:21:18.351 READ FPDMA QUEUED
ef 00 10 00 02 1c 59 6f 00 00 00 a0 00 06:21:18.351 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 00 00 00 00 00 e0 00 06:21:18.351 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 03 00 45 00 00 00 00 00 00 00 a0 00 06:21:18.351 IDENTIFY DEVICE
ef 10 03 02 45 00 00 00 00 00 00 a0 00 06:21:18.351 SET FEATURES [Set transfer mode]
Error 11 [10] occurred at disk power-on lifetime: 4320 hours (180 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 02 00 00 0f bf fb a6 6f 00 Error: UNC at LBA = 0x0fbffba6 = 264240038
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 01 00 00 00 00 0f bf fb a6 40 08 06:21:14.351 READ FPDMA QUEUED
ef 00 10 00 02 1c 59 6f 00 00 00 a0 00 06:21:14.351 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 00 00 00 00 00 e0 00 06:21:14.351 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 03 00 45 00 00 00 00 00 00 00 a0 00 06:21:14.351 IDENTIFY DEVICE
ef 10 03 02 45 00 00 00 00 00 00 a0 00 06:21:14.350 SET FEATURES [Set transfer mode]
Error 10 [9] occurred at disk power-on lifetime: 4320 hours (180 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 02 00 00 0f bf fb a6 6f 00 Error: UNC at LBA = 0x0fbffba6 = 264240038
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 01 00 00 00 00 0f bf fb a6 40 08 06:21:10.373 READ FPDMA QUEUED
ef 00 10 00 02 1c 59 6f 00 00 00 a0 00 06:21:10.373 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 00 00 00 00 00 e0 00 06:21:10.373 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 03 00 45 00 00 00 00 00 00 00 a0 00 06:21:10.373 IDENTIFY DEVICE
ef 10 03 02 45 00 00 00 00 00 00 a0 00 06:21:10.373 SET FEATURES [Set transfer mode]
Error 9 [8] occurred at disk power-on lifetime: 4320 hours (180 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 02 00 00 0f bf fb a6 6f 00 Error: UNC at LBA = 0x0fbffba6 = 264240038
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 01 00 00 00 00 0f bf fb a6 40 08 06:21:06.373 READ FPDMA QUEUED
ef 00 10 00 02 1c 59 6f 00 00 00 a0 00 06:21:06.373 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 00 00 00 00 00 e0 00 06:21:06.373 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 03 00 45 00 00 00 00 00 00 00 a0 00 06:21:06.373 IDENTIFY DEVICE
ef 10 03 02 45 00 00 00 00 00 00 a0 00 06:21:06.372 SET FEATURES [Set transfer mode]
Error 8 [7] occurred at disk power-on lifetime: 4320 hours (180 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 02 00 00 0f bf fb a6 6f 00 Error: UNC at LBA = 0x0fbffba6 = 264240038
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 01 00 00 00 00 0f bf fb a6 40 08 06:21:02.384 READ FPDMA QUEUED
ef 00 10 00 02 1c 59 6f 00 00 00 a0 00 06:21:02.384 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 00 00 00 00 00 e0 00 06:21:02.384 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 03 00 45 00 00 00 00 00 00 00 a0 00 06:21:02.384 IDENTIFY DEVICE
ef 10 03 02 45 00 00 00 00 00 00 a0 00 06:21:02.383 SET FEATURES [Set transfer mode]
Error 7 [6] occurred at disk power-on lifetime: 4320 hours (180 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 02 00 00 0f bf fb a6 6f 00 Error: UNC at LBA = 0x0fbffba6 = 264240038
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 01 00 00 00 00 0f bf fb a6 40 08 06:20:58.465 READ FPDMA QUEUED
60 00 01 00 00 00 00 0f bf fb a5 40 08 06:20:58.465 READ FPDMA QUEUED
60 00 01 00 00 00 00 0f bf fb a4 40 08 06:20:58.464 READ FPDMA QUEUED
60 00 01 00 00 00 00 0f bf fb a3 40 08 06:20:58.464 READ FPDMA QUEUED
60 00 01 00 00 00 00 0f bf fb a2 40 08 06:20:58.464 READ FPDMA QUEUED
Error 6 [5] occurred at disk power-on lifetime: 4320 hours (180 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 02 00 00 0f bf fb a6 6f 00 Error: UNC at LBA = 0x0fbffba6 = 264240038
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 02 00 00 00 00 00 0f bf fa 00 40 08 06:20:54.373 READ FPDMA QUEUED
ef 00 10 00 02 1c 59 6f 00 00 00 a0 00 06:20:54.373 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 00 00 00 00 00 e0 00 06:20:54.373 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 03 00 45 00 00 00 00 00 00 00 a0 00 06:20:54.372 IDENTIFY DEVICE
ef 10 03 02 45 00 00 00 00 00 00 a0 00 06:20:54.372 SET FEATURES [Set transfer mode]
Error 5 [4] occurred at disk power-on lifetime: 4320 hours (180 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 02 00 00 0f bf fb a6 6f 00 Error: UNC at LBA = 0x0fbffba6 = 264240038
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 02 00 00 00 00 00 0f bf fa 00 40 08 06:20:50.373 READ FPDMA QUEUED
ef 00 10 00 02 1c 59 6f 00 00 00 a0 00 06:20:50.373 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 00 00 00 00 00 e0 00 06:20:50.373 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 03 00 45 00 00 00 00 00 00 00 a0 00 06:20:50.372 IDENTIFY DEVICE
ef 10 03 02 45 00 00 00 00 00 00 a0 00 06:20:50.372 SET FEATURES [Set transfer mode]
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 1 (0x0001)
Device State: Active (0)
Current Temperature: 42 Celsius
Power Cycle Min/Max Temperature: 21/45 Celsius
Lifetime Min/Max Temperature: 9/54 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/55 Celsius
Min/Max Temperature Limit: 5/55 Celsius
Temperature History Size (Index): 478 (33)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0007 4 0 R_ERR response for host-to-device non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 7 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 7 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
View Git Blame Copy Permalink