80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Toshiba/MK3254/MK3254GSY/A85E1470254A
Andrey Ponomarenko 06d1e49c98 Update of reports (new: 3633, modified: 0)
2023-02-14 01:25:13 +03:00

318 lines
16 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p2 amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: TOSHIBA MK3254GSY
Serial Number: --
LU WWN Device Id: 5 000039 ...
Firmware Version: LE001A
User Capacity: 320,072,933,376 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database 7.3/5319
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 1.5 Gb/s
Local Time is: Wed Nov 9 20:36:23 2022 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 103) minutes.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
2 Throughput_Performance P-S--- 100 100 050 - 0
3 Spin_Up_Time POS--K 100 100 001 - 2151
4 Start_Stop_Count -O--CK 100 100 000 - 2257
5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0
7 Seek_Error_Rate PO-R-- 100 100 050 - 0
8 Seek_Time_Performance P-S--- 100 100 050 - 0
9 Power_On_Hours -O--CK 094 094 000 - 2565
10 Spin_Retry_Count PO--CK 144 100 030 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 2226
191 G-Sense_Error_Rate -O--CK 100 100 000 - 183
192 Power-Off_Retract_Count -O--CK 100 100 000 - 20
193 Load_Cycle_Count -O--CK 098 098 000 - 21400
194 Temperature_Celsius -O---K 100 100 000 - 45 (Min/Max 18/65)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O--CK 100 100 000 - 0
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
220 Disk_Shift -O---- 100 100 000 - 41399
222 Loaded_Hours -O--CK 096 096 000 - 1848
223 Load_Retry_Count -O--CK 100 100 000 - 0
224 Load_Friction -O---K 100 100 000 - 0
226 Load-in_Time -OS--K 100 100 000 - 285
240 Head_Flying_Hours P----- 100 100 001 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 27
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 27 [26] occurred at disk power-on lifetime: 1624 hours (67 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 12 00 00 01 60 6f 60 61 00 Error: UNC at LBA = 0x01606f60 = 23097184
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 20 00 10 00 00 01 60 6f 60 40 00 00:01:44.508 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 00 00:01:44.508 READ LOG EXT
60 00 20 00 08 00 00 01 60 6f 60 40 00 00:01:41.827 READ FPDMA QUEUED
ef 03 02 45 00 00 00 00 00 00 00 40 00 00:01:40.821 SET FEATURES [Enable write cache]
ef 00 03 10 45 00 00 00 00 00 00 40 00 00:01:40.821 SET FEATURES [Set transfer mode]
Error 26 [25] occurred at disk power-on lifetime: 1624 hours (67 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 0a 00 00 01 60 6f 60 61 00 Error: UNC at LBA = 0x01606f60 = 23097184
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 20 00 08 00 00 01 60 6f 60 40 00 00:01:41.827 READ FPDMA QUEUED
ef 03 02 45 00 00 00 00 00 00 00 40 00 00:01:40.821 SET FEATURES [Enable write cache]
ef 00 03 10 45 00 00 00 00 00 00 40 00 00:01:40.821 SET FEATURES [Set transfer mode]
c6 20 00 01 10 00 00 01 00 00 00 40 00 00:01:40.821 SET MULTIPLE MODE
aa aa aa aa aa aa aa aa aa aa aa aa ff 00:01:40.793 [RESERVED]
Error 25 [24] occurred at disk power-on lifetime: 1624 hours (67 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 6a 00 00 01 60 6f 60 61 00 Error: UNC at LBA = 0x01606f60 = 23097184
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 20 00 68 00 00 01 60 6f 60 40 00 00:01:38.200 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 00 00:01:38.199 READ LOG EXT
60 00 20 00 60 00 00 01 60 6f 60 40 00 00:01:35.608 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 00 00:01:35.607 READ LOG EXT
60 00 20 00 58 00 00 01 60 6f 60 40 00 00:01:33.016 READ FPDMA QUEUED
Error 24 [23] occurred at disk power-on lifetime: 1624 hours (67 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 62 00 00 01 60 6f 60 61 00 Error: UNC at LBA = 0x01606f60 = 23097184
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 20 00 60 00 00 01 60 6f 60 40 00 00:01:35.608 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 00 00:01:35.607 READ LOG EXT
60 00 20 00 58 00 00 01 60 6f 60 40 00 00:01:33.016 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 00 00:01:33.016 READ LOG EXT
60 00 20 00 50 00 00 01 60 6f 60 40 00 00:01:30.424 READ FPDMA QUEUED
Error 23 [22] occurred at disk power-on lifetime: 1624 hours (67 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 5a 00 00 01 60 6f 60 61 00 Error: UNC at LBA = 0x01606f60 = 23097184
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 20 00 58 00 00 01 60 6f 60 40 00 00:01:33.016 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 00 00:01:33.016 READ LOG EXT
60 00 20 00 50 00 00 01 60 6f 60 40 00 00:01:30.424 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 00 00:01:30.424 READ LOG EXT
60 00 20 00 48 00 00 01 60 6f 60 40 00 00:01:27.833 READ FPDMA QUEUED
Error 22 [21] occurred at disk power-on lifetime: 1624 hours (67 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 52 00 00 01 60 6f 60 61 00 Error: UNC at LBA = 0x01606f60 = 23097184
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 20 00 50 00 00 01 60 6f 60 40 00 00:01:30.424 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 00 00:01:30.424 READ LOG EXT
60 00 20 00 48 00 00 01 60 6f 60 40 00 00:01:27.833 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 00 00:01:27.832 READ LOG EXT
60 00 20 00 40 00 00 01 60 6f 60 40 00 00:01:25.241 READ FPDMA QUEUED
Error 21 [20] occurred at disk power-on lifetime: 1624 hours (67 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 4a 00 00 01 60 6f 60 61 00 Error: UNC at LBA = 0x01606f60 = 23097184
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 20 00 48 00 00 01 60 6f 60 40 00 00:01:27.833 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 00 00:01:27.832 READ LOG EXT
60 00 20 00 40 00 00 01 60 6f 60 40 00 00:01:25.241 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 00 00:01:25.240 READ LOG EXT
60 00 20 00 38 00 00 01 60 6f 60 40 00 00:01:22.649 READ FPDMA QUEUED
Error 20 [19] occurred at disk power-on lifetime: 1624 hours (67 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 42 00 00 01 60 6f 60 61 00 Error: UNC at LBA = 0x01606f60 = 23097184
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 20 00 40 00 00 01 60 6f 60 40 00 00:01:25.241 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 00 00:01:25.240 READ LOG EXT
60 00 20 00 38 00 00 01 60 6f 60 40 00 00:01:22.649 READ FPDMA QUEUED
60 00 08 00 30 00 00 01 60 6f 68 40 00 00:01:20.201 READ FPDMA QUEUED
60 00 08 00 28 00 00 01 60 70 f0 40 00 00:01:20.191 READ FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 1 (0x0001)
Device State: Active (0)
Current Temperature: 45 Celsius
Power Cycle Min/Max Temperature: --/45 Celsius
Lifetime Min/Max Temperature: --/65 Celsius
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/55 Celsius
Min/Max Temperature Limit: 5/55 Celsius
Temperature History Size (Index): 478 (45)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0007 4 0 R_ERR response for host-to-device non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 9 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 12 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
View Git Blame Copy Permalink