80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Toshiba/MK3259/MK3259GSXP/E79D2BE5E1B5
Andrey Ponomarenko 6760e6c317 Update of reports (new: 1329, modified: 0)
2023-05-01 22:53:35 +03:00

325 lines
16 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MK..59GSXP (AF)
Device Model: TOSHIBA MK3259GSXP
Serial Number: --
LU WWN Device Id: 5 000039 ...
Firmware Version: GN003J
User Capacity: 320,072,933,376 bytes [320 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database 7.3/5319
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Wed Mar 15 19:07:33 2023 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 254 (maximum performance)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 92) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
2 Throughput_Performance P-S--- 100 100 050 - 0
3 Spin_Up_Time POS--K 100 100 001 - 1224
4 Start_Stop_Count -O--CK 100 100 000 - 14294
5 Reallocated_Sector_Ct PO--CK 100 100 050 - 304
7 Seek_Error_Rate PO-R-- 100 100 050 - 0
8 Seek_Time_Performance P-S--- 100 100 050 - 0
9 Power_On_Hours -O--CK 060 060 000 - 16026
10 Spin_Retry_Count PO--CK 253 100 030 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 9468
191 G-Sense_Error_Rate -O--CK 100 100 000 - 4162
192 Power-Off_Retract_Count -O--CK 100 100 000 - 227
193 Load_Cycle_Count -O--CK 091 091 000 - 95063
194 Temperature_Celsius -O---K 100 100 000 - 29 (Min/Max 4/60)
196 Reallocated_Event_Count -O--CK 100 100 000 - 23
197 Current_Pending_Sector -O--CK 100 100 000 - 0
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
220 Disk_Shift -O---- 100 100 000 - 52
222 Loaded_Hours -O--CK 078 078 000 - 8931
223 Load_Retry_Count -O--CK 100 100 000 - 0
224 Load_Friction -O---K 100 100 000 - 0
226 Load-in_Time -OS--K 100 100 000 - 295
240 Head_Flying_Hours P----- 100 100 001 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 19241 (device log contains only the most recent 256 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 19241 [40] occurred at disk power-on lifetime: 8232 hours (343 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 01 00 00 01 0b cb 9f e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x010bcb9f = 17550239
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 80 00 00 01 0b cb 20 e0 00 00:35:03.403 WRITE DMA EXT
35 00 00 00 80 00 00 01 0b ca a0 e0 00 00:35:03.401 WRITE DMA EXT
35 00 00 00 08 00 00 01 0b c3 e0 e0 00 00:35:03.400 WRITE DMA EXT
35 00 00 00 30 00 00 01 0b ca 68 e0 00 00:35:03.400 WRITE DMA EXT
35 00 00 00 80 00 00 01 0b c9 e8 e0 00 00:35:03.399 WRITE DMA EXT
Error 19240 [39] occurred at disk power-on lifetime: 7518 hours (313 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 f2 00 00 00 65 2f 80 60 00 Error: WP at LBA = 0x00652f80 = 6631296
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 98 00 00 00 65 3a c0 40 00 01:23:07.061 WRITE FPDMA QUEUED
61 01 00 00 68 00 00 05 b2 9b e0 40 00 01:23:07.057 WRITE FPDMA QUEUED
61 01 00 00 60 00 00 05 b2 9a e0 40 00 01:23:07.057 WRITE FPDMA QUEUED
61 01 00 00 58 00 00 05 b2 99 e0 40 00 01:23:07.057 WRITE FPDMA QUEUED
61 01 00 00 50 00 00 05 b2 98 e0 40 00 01:23:07.057 WRITE FPDMA QUEUED
Error 19239 [38] occurred at disk power-on lifetime: 7518 hours (313 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 7a 00 00 00 65 2f 80 60 00 Error: WP at LBA = 0x00652f80 = 6631296
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 a0 00 00 00 5f 01 c8 40 00 01:23:02.900 WRITE FPDMA QUEUED
61 00 08 00 98 00 00 00 65 38 00 40 00 01:23:02.849 WRITE FPDMA QUEUED
61 01 00 00 90 00 00 05 b2 87 e0 40 00 01:23:02.849 WRITE FPDMA QUEUED
61 01 00 00 88 00 00 05 b2 86 e0 40 00 01:23:02.849 WRITE FPDMA QUEUED
61 01 00 00 80 00 00 05 b2 85 e0 40 00 01:23:02.849 WRITE FPDMA QUEUED
Error 19238 [37] occurred at disk power-on lifetime: 7518 hours (313 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 8a 00 00 00 65 2f 80 60 00 Error: WP at LBA = 0x00652f80 = 6631296
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 01 00 00 a0 00 00 05 b2 59 e0 40 00 01:22:58.626 WRITE FPDMA QUEUED
60 01 00 00 88 00 00 00 65 2f 78 40 00 01:22:58.626 READ FPDMA QUEUED
61 00 08 00 80 00 00 04 1d 7e 30 40 00 01:22:58.626 WRITE FPDMA QUEUED
61 01 00 00 78 00 00 05 b2 67 e0 40 00 01:22:58.626 WRITE FPDMA QUEUED
61 01 00 00 70 00 00 05 b2 66 e0 40 00 01:22:58.626 WRITE FPDMA QUEUED
Error 19237 [36] occurred at disk power-on lifetime: 7518 hours (313 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 b2 00 00 00 65 2f 80 60 00 Error: WP at LBA = 0x00652f80 = 6631296
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 01 00 00 90 00 00 05 b2 67 e0 40 00 01:22:54.449 WRITE FPDMA QUEUED
61 01 00 00 88 00 00 05 b2 66 e0 40 00 01:22:54.449 WRITE FPDMA QUEUED
61 01 00 00 80 00 00 05 b2 65 e0 40 00 01:22:54.449 WRITE FPDMA QUEUED
61 01 00 00 78 00 00 05 b2 64 e0 40 00 01:22:54.449 WRITE FPDMA QUEUED
61 01 00 00 70 00 00 05 b2 63 e0 40 00 01:22:54.449 WRITE FPDMA QUEUED
Error 19236 [35] occurred at disk power-on lifetime: 7518 hours (313 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 0a 00 00 00 65 2f 80 60 00 Error: WP at LBA = 0x00652f80 = 6631296
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 01 00 00 60 00 00 05 b2 4f e0 40 00 01:22:50.293 WRITE FPDMA QUEUED
61 01 00 00 58 00 00 05 b2 4e e0 40 00 01:22:50.293 WRITE FPDMA QUEUED
61 01 00 00 50 00 00 05 b2 4d e0 40 00 01:22:50.293 WRITE FPDMA QUEUED
61 01 00 00 48 00 00 05 b2 4c e0 40 00 01:22:50.293 WRITE FPDMA QUEUED
61 01 00 00 40 00 00 05 b2 4b e0 40 00 01:22:50.293 WRITE FPDMA QUEUED
Error 19235 [34] occurred at disk power-on lifetime: 7518 hours (313 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 32 00 00 00 65 2f 80 60 00 Error: WP at LBA = 0x00652f80 = 6631296
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 b0 00 00 00 64 36 60 40 00 01:22:46.072 WRITE FPDMA QUEUED
61 00 08 00 a8 00 00 00 5f 01 c0 40 00 01:22:46.072 WRITE FPDMA QUEUED
61 01 00 00 a0 00 00 05 b2 47 e0 40 00 01:22:46.072 WRITE FPDMA QUEUED
61 01 00 00 98 00 00 05 b2 46 e0 40 00 01:22:46.072 WRITE FPDMA QUEUED
61 01 00 00 90 00 00 05 b2 45 e0 40 00 01:22:46.072 WRITE FPDMA QUEUED
Error 19234 [33] occurred at disk power-on lifetime: 7518 hours (313 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 72 00 00 00 65 2f 80 60 00 Error: WP at LBA = 0x00652f80 = 6631296
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 01 00 00 a0 00 00 05 b2 2f e0 40 00 01:22:41.837 WRITE FPDMA QUEUED
61 01 00 00 98 00 00 05 b2 2e e0 40 00 01:22:41.837 WRITE FPDMA QUEUED
61 01 00 00 90 00 00 05 b2 2d e0 40 00 01:22:41.837 WRITE FPDMA QUEUED
61 01 00 00 88 00 00 05 b2 2c e0 40 00 01:22:41.837 WRITE FPDMA QUEUED
61 01 00 00 80 00 00 05 b2 2b e0 40 00 01:22:41.837 WRITE FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 4 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 1 (0x0001)
Device State: Active (0)
Current Temperature: 29 Celsius
Power Cycle Min/Max Temperature: 20/29 Celsius
Lifetime Min/Max Temperature: 4/60 Celsius
Under/Over Temperature Limit Count: 0/360
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/55 Celsius
Min/Max Temperature Limit: 5/55 Celsius
Temperature History Size (Index): 478 (155)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0007 4 0 R_ERR response for host-to-device non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 6 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
View Git Blame Copy Permalink