80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Toshiba/MK3259/MK3259GSXP/E9365256C3D1
Andrey Ponomarenko 2a811b67c1 Update of reports (new: 6895, modified: 16)
2025-01-05 01:57:11 +03:00

324 lines
16 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MK..59GSXP (AF)
Device Model: TOSHIBA MK3259GSXP
Serial Number: --
LU WWN Device Id: 5 000039 ...
Firmware Version: GN003J
User Capacity: 320,072,933,376 bytes [320 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database 7.3/5319
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Thu Nov 21 07:45:28 2024 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 112) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 105) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
2 Throughput_Performance P-S--- 100 100 050 - 0
3 Spin_Up_Time POS--K 100 100 001 - 1174
4 Start_Stop_Count -O--CK 100 100 000 - 14483
5 Reallocated_Sector_Ct PO--CK 100 100 050 - 8
7 Seek_Error_Rate PO-R-- 100 100 050 - 0
8 Seek_Time_Performance P-S--- 100 100 050 - 0
9 Power_On_Hours -O--CK 060 060 000 - 16124
10 Spin_Retry_Count PO--CK 253 100 030 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 9103
191 G-Sense_Error_Rate -O--CK 100 100 000 - 1065
192 Power-Off_Retract_Count -O--CK 099 099 000 - 785
193 Load_Cycle_Count -O--CK 083 083 000 - 178581
194 Temperature_Celsius -O---K 100 100 000 - 32 (Min/Max 3/51)
196 Reallocated_Event_Count -O--CK 100 100 000 - 1
197 Current_Pending_Sector -O--CK 100 100 000 - 0
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 1
220 Disk_Shift -O---- 100 100 000 - 44
222 Loaded_Hours -O--CK 081 081 000 - 7632
223 Load_Retry_Count -O--CK 100 100 000 - 0
224 Load_Friction -O---K 100 100 000 - 0
226 Load-in_Time -OS--K 100 100 000 - 336
240 Head_Flying_Hours P----- 100 100 001 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 376 (device log contains only the most recent 256 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 376 [119] occurred at disk power-on lifetime: 13141 hours (547 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 41 00 78 00 00 23 c4 5d ff 63 00 Error: ICRC, ABRT at LBA = 0x23c45dff = 600071679
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 b8 00 00 23 b5 00 00 40 00 00:04:34.547 READ FPDMA QUEUED
61 0a 00 00 b0 00 00 23 c4 94 00 40 00 00:04:34.238 WRITE FPDMA QUEUED
61 0a 00 00 a8 00 00 23 c4 8a 00 40 00 00:04:34.238 WRITE FPDMA QUEUED
61 0a 00 00 a0 00 00 23 c4 80 00 40 00 00:04:34.205 WRITE FPDMA QUEUED
61 04 00 00 98 00 00 23 c4 7c 00 40 00 00:04:34.205 WRITE FPDMA QUEUED
Error 375 [118] occurred at disk power-on lifetime: 8589 hours (357 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 0a 00 00 14 4e 0c 30 64 00 Error: WP at LBA = 0x144e0c30 = 340659248
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 00 00 00 00 4d 6b 67 40 00 00:59:29.848 WRITE FPDMA QUEUED
60 00 20 00 08 00 00 14 4e 0c 1f 40 00 00:59:29.528 READ FPDMA QUEUED
60 01 00 00 00 00 00 14 4e 0b 1f 40 00 00:59:29.528 READ FPDMA QUEUED
61 00 20 00 08 00 00 00 3c 81 3f 40 00 00:59:29.527 WRITE FPDMA QUEUED
61 01 00 00 00 00 00 00 3c 80 3f 40 00 00:59:29.527 WRITE FPDMA QUEUED
Error 374 [117] occurred at disk power-on lifetime: 7507 hours (312 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 00 00 5b b6 67 e0 00 Error: UNC 1 sectors at LBA = 0x005bb667 = 6010471
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 01 00 00 00 5b b6 67 e0 00 00:29:06.500 READ DMA EXT
25 00 00 00 10 00 00 00 bc 0f 57 e0 00 00:29:06.489 READ DMA EXT
25 00 00 00 01 00 00 00 5b b6 66 e0 00 00:29:02.467 READ DMA EXT
25 00 00 00 08 00 00 00 bc 0f 77 e0 00 00:29:02.455 READ DMA EXT
25 00 00 00 01 00 00 00 5b b6 65 e0 00 00:28:58.422 READ DMA EXT
Error 373 [116] occurred at disk power-on lifetime: 7507 hours (312 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 00 00 5b b6 66 e0 00 Error: UNC 1 sectors at LBA = 0x005bb666 = 6010470
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 01 00 00 00 5b b6 66 e0 00 00:29:02.467 READ DMA EXT
25 00 00 00 08 00 00 00 bc 0f 77 e0 00 00:29:02.455 READ DMA EXT
25 00 00 00 01 00 00 00 5b b6 65 e0 00 00:28:58.422 READ DMA EXT
25 00 00 00 10 00 00 00 bc 0f 67 e0 00 00:28:58.411 READ DMA EXT
25 00 00 00 01 00 00 00 5b b6 64 e0 00 00:28:54.388 READ DMA EXT
Error 372 [115] occurred at disk power-on lifetime: 7507 hours (312 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 00 00 5b b6 65 e0 00 Error: UNC 1 sectors at LBA = 0x005bb665 = 6010469
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 01 00 00 00 5b b6 65 e0 00 00:28:58.422 READ DMA EXT
25 00 00 00 10 00 00 00 bc 0f 67 e0 00 00:28:58.411 READ DMA EXT
25 00 00 00 01 00 00 00 5b b6 64 e0 00 00:28:54.388 READ DMA EXT
25 00 00 00 10 00 00 00 bc 0e e7 e0 00 00:28:54.377 READ DMA EXT
25 00 00 00 01 00 00 00 5b b6 63 e0 00 00:28:50.333 READ DMA EXT
Error 371 [114] occurred at disk power-on lifetime: 7507 hours (312 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 00 00 5b b6 64 e0 00 Error: UNC 1 sectors at LBA = 0x005bb664 = 6010468
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 01 00 00 00 5b b6 64 e0 00 00:28:54.388 READ DMA EXT
25 00 00 00 10 00 00 00 bc 0e e7 e0 00 00:28:54.377 READ DMA EXT
25 00 00 00 01 00 00 00 5b b6 63 e0 00 00:28:50.333 READ DMA EXT
25 00 00 00 08 00 00 00 bc 0f 37 e0 00 00:28:50.322 READ DMA EXT
25 00 00 00 01 00 00 00 5b b6 62 e0 00 00:28:46.299 READ DMA EXT
Error 370 [113] occurred at disk power-on lifetime: 7507 hours (312 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 00 00 5b b6 63 e0 00 Error: UNC 1 sectors at LBA = 0x005bb663 = 6010467
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 01 00 00 00 5b b6 63 e0 00 00:28:50.333 READ DMA EXT
25 00 00 00 08 00 00 00 bc 0f 37 e0 00 00:28:50.322 READ DMA EXT
25 00 00 00 01 00 00 00 5b b6 62 e0 00 00:28:46.299 READ DMA EXT
25 00 00 00 01 00 00 00 5b b6 61 e0 00 00:28:42.147 READ DMA EXT
25 00 00 00 40 00 00 00 29 9f 29 e0 00 00:28:42.133 READ DMA EXT
Error 369 [112] occurred at disk power-on lifetime: 7507 hours (312 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 00 00 5b b6 62 e0 00 Error: UNC 1 sectors at LBA = 0x005bb662 = 6010466
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 01 00 00 00 5b b6 62 e0 00 00:28:46.299 READ DMA EXT
25 00 00 00 01 00 00 00 5b b6 61 e0 00 00:28:42.147 READ DMA EXT
25 00 00 00 40 00 00 00 29 9f 29 e0 00 00:28:42.133 READ DMA EXT
35 00 00 00 20 00 00 12 a1 96 1f e0 00 00:28:42.133 WRITE DMA EXT
35 00 00 00 20 00 00 02 8f 51 1f e0 00 00:28:42.132 WRITE DMA EXT
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 00% 7449 6010464
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 1 (0x0001)
Device State: Active (0)
Current Temperature: 32 Celsius
Power Cycle Min/Max Temperature: 23/34 Celsius
Lifetime Min/Max Temperature: 3/51 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/55 Celsius
Min/Max Temperature Limit: 5/55 Celsius
Temperature History Size (Index): 478 (467)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0007 4 0 R_ERR response for host-to-device non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 105 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 60 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
View Git Blame Copy Permalink