80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Toshiba/MK3261/MK3261GSYN/E9DC8FED307E
Andrey Ponomarenko 22f0da8c56 Update of reports (new: 0, modified: 1434)
2023-02-16 00:05:51 +03:00

330 lines
17 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MK..61GSY[N]
Device Model: TOSHIBA MK3261GSYN
Serial Number: --
LU WWN Device Id: 5 000039 ...
Firmware Version: MH000C
User Capacity: 320,072,933,376 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Wed Jan 19 09:54:10 2022 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x51) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 60) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0
2 Throughput_Performance POS--K 100 100 050 - 0
3 Spin_Up_Time PO---K 100 100 002 - 1236
4 Start_Stop_Count -O--CK 100 100 000 - 8570
5 Reallocated_Sector_Ct PO--CK 096 096 010 - 90
7 Seek_Error_Rate POSR-K 100 100 050 - 0
8 Seek_Time_Performance P-S--K 100 100 050 - 0
9 Power_On_Minutes -O--CK 063 063 000 - 249h+02m
10 Spin_Retry_Count PO--CK 253 100 030 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 3913
183 Runtime_Bad_Block -O--CK 100 100 001 - 1
184 End-to-End_Error PO--CK 100 100 097 - 0
185 Unknown_Attribute -O--CK 100 100 001 - 65535
187 Reported_Uncorrect -O--CK 001 001 000 - 127
188 Command_Timeout -O--CK 100 098 000 - 1472
189 High_Fly_Writes -O-RCK 100 100 001 - 0
190 Airflow_Temperature_Cel -O---K 059 043 040 - 41 (Min/Max 23/44)
191 G-Sense_Error_Rate -O--CK 100 100 000 - 503
192 Power-Off_Retract_Count -O---K 100 100 000 - 23003487
193 Load_Cycle_Count -O--CK 093 093 000 - 72776
196 Reallocated_Event_Count -O--CK 100 100 000 - 16
197 Current_Pending_Sector -O--CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 127
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 127 [126] occurred at disk power-on lifetime: 9595 hours (399 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 da 00 00 21 40 c1 7b 61 00 Error: UNC at LBA = 0x2140c17b = 557891963
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 d8 00 00 21 40 c0 a0 40 00 04:44:05.047 READ FPDMA QUEUED
60 01 00 00 d0 00 00 21 40 bf a0 40 00 04:44:05.046 READ FPDMA QUEUED
60 01 00 00 c8 00 00 21 40 be a0 40 00 04:44:03.847 READ FPDMA QUEUED
60 01 00 00 c0 00 00 21 40 bd a0 40 00 04:44:03.847 READ FPDMA QUEUED
60 01 00 00 b8 00 00 21 40 bc a0 40 00 04:44:02.049 READ FPDMA QUEUED
Error 126 [125] occurred at disk power-on lifetime: 8626 hours (359 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 0a 00 00 1e 34 27 40 6e 00 Error: WP at LBA = 0x1e342740 = 506734400
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 50 00 00 00 64 e1 f8 40 00 01:29:48.081 WRITE FPDMA QUEUED
61 00 08 00 48 00 00 00 64 a5 98 40 00 01:29:48.081 WRITE FPDMA QUEUED
61 00 08 00 40 00 00 00 64 a5 88 40 00 01:29:48.080 WRITE FPDMA QUEUED
61 00 08 00 38 00 00 00 64 a4 48 40 00 01:29:48.080 WRITE FPDMA QUEUED
61 00 08 00 30 00 00 00 64 75 a0 40 00 01:29:48.080 WRITE FPDMA QUEUED
Error 125 [124] occurred at disk power-on lifetime: 8626 hours (359 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 ba 00 00 1e 34 27 40 6e 00 Error: WP at LBA = 0x1e342740 = 506734400
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 18 00 d8 00 00 00 62 ef 68 40 00 01:29:44.938 WRITE FPDMA QUEUED
61 00 18 00 d0 00 00 00 62 dd e0 40 00 01:29:44.938 WRITE FPDMA QUEUED
61 00 10 00 c8 00 00 00 62 dd c0 40 00 01:29:44.938 WRITE FPDMA QUEUED
61 00 48 00 c0 00 00 00 62 dd 70 40 00 01:29:44.936 WRITE FPDMA QUEUED
60 00 80 00 b8 00 00 1e 34 26 f0 40 00 01:29:44.936 READ FPDMA QUEUED
Error 124 [123] occurred at disk power-on lifetime: 8626 hours (359 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 8a 00 00 1e 34 27 40 6e 00 Error: WP at LBA = 0x1e342740 = 506734400
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 98 00 00 00 5e dd 78 40 00 01:29:41.804 WRITE FPDMA QUEUED
61 00 08 00 90 00 00 00 5e dd 88 40 00 01:29:41.803 WRITE FPDMA QUEUED
60 00 80 00 88 00 00 1e 34 26 f0 40 00 01:29:41.802 READ FPDMA QUEUED
61 00 18 00 80 00 00 00 5f c1 78 40 00 01:29:41.802 WRITE FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 00 01:29:41.802 READ LOG EXT
Error 123 [122] occurred at disk power-on lifetime: 8626 hours (359 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 62 00 00 1e 34 27 40 6e 00 Error: WP at LBA = 0x1e342740 = 506734400
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 07 00 68 00 00 09 ee 83 28 40 00 01:29:38.678 WRITE FPDMA QUEUED
60 00 80 00 60 00 00 1e 34 26 f0 40 00 01:29:38.678 READ FPDMA QUEUED
61 00 08 00 58 00 00 00 5e dd 80 40 00 01:29:38.678 WRITE FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 00 01:29:38.677 READ LOG EXT
61 00 08 00 48 00 00 00 5e dd 80 40 00 01:29:38.677 WRITE FPDMA QUEUED
Error 122 [121] occurred at disk power-on lifetime: 8626 hours (359 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 0a 00 00 1e 34 27 40 6e 00 Error: WP at LBA = 0x1e342740 = 506734400
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 40 00 00 00 5e dd 88 40 00 01:29:35.540 WRITE FPDMA QUEUED
61 00 04 00 38 00 00 00 3c 8c b8 40 00 01:29:35.540 WRITE FPDMA QUEUED
61 00 08 00 30 00 00 00 3c 57 88 40 00 01:29:35.539 WRITE FPDMA QUEUED
61 00 08 00 28 00 00 00 5e dd 80 40 00 01:29:35.539 WRITE FPDMA QUEUED
61 00 08 00 20 00 00 00 5f c1 70 40 00 01:29:35.538 WRITE FPDMA QUEUED
Error 121 [120] occurred at disk power-on lifetime: 8626 hours (359 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 ea 00 00 1e 34 27 40 6e 00 Error: UNC at LBA = 0x1e342740 = 506734400
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 80 00 e8 00 00 1e 34 26 f0 40 00 01:29:32.428 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 00 01:29:32.427 READ LOG EXT
61 00 08 00 d8 00 00 00 11 a0 e8 40 00 01:29:29.296 WRITE FPDMA QUEUED
60 00 80 00 d0 00 00 1e 34 26 f0 40 00 01:29:29.295 READ FPDMA QUEUED
61 00 08 00 c8 00 00 00 03 34 e0 40 00 01:29:29.295 WRITE FPDMA QUEUED
Error 120 [119] occurred at disk power-on lifetime: 8626 hours (359 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 d2 00 00 1e 34 27 40 6e 00 Error: WP at LBA = 0x1e342740 = 506734400
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 d8 00 00 00 11 a0 e8 40 00 01:29:29.296 WRITE FPDMA QUEUED
60 00 80 00 d0 00 00 1e 34 26 f0 40 00 01:29:29.295 READ FPDMA QUEUED
61 00 08 00 c8 00 00 00 03 34 e0 40 00 01:29:29.295 WRITE FPDMA QUEUED
61 00 08 00 c0 00 00 00 11 a0 d0 40 00 01:29:29.295 WRITE FPDMA QUEUED
61 00 01 00 b8 00 00 07 92 a8 e8 40 00 01:29:29.295 WRITE FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 13337 -
# 2 Short offline Completed without error 00% 12804 -
# 3 Extended offline Completed without error 00% 12628 -
# 4 Short offline Aborted by host 90% 12516 -
# 5 Short offline Completed without error 00% 12516 -
# 6 Short offline Completed without error 00% 12189 -
# 7 Short offline Aborted by host 30% 11885 -
# 8 Short offline Aborted by host 90% 10964 -
# 9 Short offline Completed without error 00% 1 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 1 (0x0001)
Device State: Active (0)
Current Temperature: 41 Celsius
Power Cycle Min/Max Temperature: 23/44 Celsius
Lifetime Min/Max Temperature: 17/57 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: 0/60 Celsius
Temperature History Size (Index): 478 (265)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0007 4 0 R_ERR response for host-to-device non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 2 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
View Git Blame Copy Permalink