80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Toshiba/MK3276/MK3276GSX/76921D55C44A
Andrey Ponomarenko d96e63400c Update of reports (new: 3084, modified: 0)
2021-05-18 23:01:35 +03:00

322 lines
16 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MK..76GSX
Device Model: TOSHIBA MK3276GSX
Serial Number: --
LU WWN Device Id: 5 000039 ...
Firmware Version: GS001C
User Capacity: 320,072,933,376 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Tue Feb 16 09:17:19 2021 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x51) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 90) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0
2 Throughput_Performance POS--K 100 100 050 - 0
3 Spin_Up_Time PO---K 100 100 002 - 1222
4 Start_Stop_Count -O--CK 100 100 000 - 2837
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
7 Seek_Error_Rate POSR-K 100 100 050 - 0
8 Seek_Time_Performance P-S--K 100 100 050 - 0
9 Power_On_Minutes -O--CK 091 091 000 - 61h+03m
10 Spin_Retry_Count PO--CK 156 100 030 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 2826
183 Runtime_Bad_Block -O--CK 100 100 001 - 0
184 End-to-End_Error PO--CK 100 100 097 - 0
185 Unknown_Attribute -O--CK 100 100 001 - 65535
187 Reported_Uncorrect -O--CK 001 001 000 - 3322
188 Command_Timeout -O--CK 100 097 000 - 31
189 High_Fly_Writes -O-RCK 100 100 001 - 0
190 Airflow_Temperature_Cel -O---K 075 051 040 - 25 (Min/Max 21/25)
191 G-Sense_Error_Rate -O--CK 100 100 000 - 201
192 Power-Off_Retract_Count -O---K 100 100 000 - 9502865
193 Load_Cycle_Count -O--CK 097 097 000 - 30247
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O--CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 3357 (device log contains only the most recent 256 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 3357 [28] occurred at disk power-on lifetime: 2407 hours (100 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 0a 00 00 00 65 d5 99 60 00 Error: WP at LBA = 0x0065d599 = 6673817
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 10 00 00 00 63 cc 88 40 00 00:06:31.955 WRITE FPDMA QUEUED
60 00 08 00 08 00 00 00 65 d5 98 40 00 00:06:31.955 READ FPDMA QUEUED
ef 02 90 00 03 00 00 00 00 00 00 00 00 00:06:31.954 SET FEATURES [Disable SATA feature]
ef 08 02 01 00 00 00 01 00 00 00 00 00 00:06:31.954 SET FEATURES [Enable write cache]
aa aa aa aa aa aa aa aa aa aa aa aa ff 00:06:31.927 [RESERVED]
Error 3356 [27] occurred at disk power-on lifetime: 2407 hours (100 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 32 00 00 00 65 d5 99 60 00 Error: UNC at LBA = 0x0065d599 = 6673817
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 30 00 00 00 65 d5 98 40 00 00:06:27.867 READ FPDMA QUEUED
ef 02 90 00 03 00 00 00 00 00 00 00 00 00:06:27.867 SET FEATURES [Disable SATA feature]
ef 08 02 01 00 00 00 01 00 00 00 00 00 00:06:27.867 SET FEATURES [Enable write cache]
aa aa aa aa aa aa aa aa aa aa aa aa ff 00:06:27.838 [RESERVED]
61 00 08 00 30 00 00 00 04 b1 60 40 00 00:06:23.772 WRITE FPDMA QUEUED
Error 3355 [26] occurred at disk power-on lifetime: 2407 hours (100 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 12 00 00 00 65 d5 99 60 00 Error: WP at LBA = 0x0065d599 = 6673817
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 30 00 00 00 04 b1 60 40 00 00:06:23.772 WRITE FPDMA QUEUED
61 00 08 00 28 00 00 00 5e dd 78 40 00 00:06:23.772 WRITE FPDMA QUEUED
61 00 10 00 20 00 00 00 04 b1 38 40 00 00:06:23.772 WRITE FPDMA QUEUED
61 00 08 00 18 00 00 00 5e dd 88 40 00 00:06:23.772 WRITE FPDMA QUEUED
61 00 08 00 08 00 00 00 04 b1 80 40 00 00:06:23.771 WRITE FPDMA QUEUED
Error 3354 [25] occurred at disk power-on lifetime: 2407 hours (100 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 42 00 00 00 65 d5 99 60 00 Error: WP at LBA = 0x0065d599 = 6673817
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 28 00 00 00 09 03 38 40 00 00:06:19.605 WRITE FPDMA QUEUED
61 00 04 00 20 00 00 01 cd a1 40 40 00 00:06:19.605 WRITE FPDMA QUEUED
61 00 08 00 18 00 00 00 69 27 f8 40 00 00:06:19.605 WRITE FPDMA QUEUED
61 00 13 00 10 00 00 00 03 d8 58 40 00 00:06:19.604 WRITE FPDMA QUEUED
61 00 4f 00 08 00 00 00 59 21 08 40 00 00:06:19.584 WRITE FPDMA QUEUED
Error 3353 [24] occurred at disk power-on lifetime: 2407 hours (100 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 12 00 00 00 65 d5 99 60 00 Error: WP at LBA = 0x0065d599 = 6673817
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 18 00 00 00 5e dd 70 40 00 00:06:15.482 WRITE FPDMA QUEUED
61 00 08 00 18 00 00 00 5e dd 80 40 00 00:06:15.482 WRITE FPDMA QUEUED
60 00 08 00 08 00 00 00 0b c5 d0 40 00 00:06:15.474 READ FPDMA QUEUED
61 00 10 00 48 00 00 00 5f 8a 10 40 00 00:06:15.466 WRITE FPDMA QUEUED
60 00 08 00 10 00 00 00 65 d5 98 40 00 00:06:15.466 READ FPDMA QUEUED
Error 3352 [23] occurred at disk power-on lifetime: 2407 hours (100 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 92 00 00 00 65 d5 99 60 00 Error: WP at LBA = 0x0065d599 = 6673817
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 28 00 00 00 5e dd 88 40 00 00:06:11.339 WRITE FPDMA QUEUED
61 00 18 00 20 00 00 00 10 61 60 40 00 00:06:11.338 WRITE FPDMA QUEUED
61 01 00 00 18 00 00 00 10 60 60 40 00 00:06:11.338 WRITE FPDMA QUEUED
61 00 08 00 10 00 00 00 29 8b f0 40 00 00:06:11.338 WRITE FPDMA QUEUED
61 00 08 00 08 00 00 00 5e dd 80 40 00 00:06:11.316 WRITE FPDMA QUEUED
Error 3351 [22] occurred at disk power-on lifetime: 2407 hours (100 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 0a 00 00 00 65 d5 99 60 00 Error: WP at LBA = 0x0065d599 = 6673817
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 68 00 00 00 63 ab a0 40 00 00:06:07.173 WRITE FPDMA QUEUED
61 00 08 00 60 00 00 00 63 31 f8 40 00 00:06:07.173 WRITE FPDMA QUEUED
61 00 08 00 58 00 00 00 63 2b 80 40 00 00:06:07.172 WRITE FPDMA QUEUED
61 00 08 00 50 00 00 00 63 2b 38 40 00 00:06:07.172 WRITE FPDMA QUEUED
61 00 10 00 48 00 00 00 63 2a 80 40 00 00:06:07.172 WRITE FPDMA QUEUED
Error 3350 [21] occurred at disk power-on lifetime: 2407 hours (100 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 42 00 00 00 65 d5 99 60 00 Error: UNC at LBA = 0x0065d599 = 6673817
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 40 00 00 00 65 d5 98 40 00 00:06:03.048 READ FPDMA QUEUED
61 00 01 00 10 00 00 00 59 24 a0 40 00 00:06:03.048 WRITE FPDMA QUEUED
61 00 05 00 08 00 00 00 0e 75 a0 40 00 00:06:03.048 WRITE FPDMA QUEUED
ef 02 90 00 03 00 00 00 00 00 00 00 00 00:06:03.048 SET FEATURES [Disable SATA feature]
ef 05 02 01 00 00 00 01 00 00 00 00 00 00:06:03.048 SET FEATURES [Enable write cache]
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 4 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 1 (0x0001)
Device State: Active (0)
Current Temperature: 25 Celsius
Power Cycle Min/Max Temperature: 21/25 Celsius
Lifetime Min/Max Temperature: 15/49 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: 0/60 Celsius
Temperature History Size (Index): 478 (230)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0007 4 0 R_ERR response for host-to-device non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 4 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
View Git Blame Copy Permalink