80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Toshiba/MK5059/MK5059GSXP/151E948D19F2
Andrey Ponomarenko 2a811b67c1 Update of reports (new: 6895, modified: 16)
2025-01-05 01:57:11 +03:00

329 lines
17 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MK..59GSXP (AF)
Device Model: TOSHIBA MK5059GSXP
Serial Number: --
LU WWN Device Id: 5 000039 ...
Firmware Version: GN001A
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database 7.3/5319
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Tue May 23 20:02:20 2023 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 159) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
2 Throughput_Performance P-S--- 100 100 050 - 0
3 Spin_Up_Time POS--K 100 100 001 - 1536
4 Start_Stop_Count -O--CK 100 100 000 - 17196
5 Reallocated_Sector_Ct PO--CK 100 100 050 - 488
7 Seek_Error_Rate PO-R-- 100 100 050 - 0
8 Seek_Time_Performance P-S--- 100 100 050 - 0
9 Power_On_Hours -O--CK 001 001 000 - 52141
10 Spin_Retry_Count PO--CK 253 100 030 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 8224
191 G-Sense_Error_Rate -O--CK 100 100 000 - 151
192 Power-Off_Retract_Count -O--CK 100 100 000 - 368
193 Load_Cycle_Count -O--CK 031 031 000 - 698983
194 Temperature_Celsius -O---K 100 100 000 - 37 (Min/Max 21/73)
196 Reallocated_Event_Count -O--CK 100 100 000 - 38
197 Current_Pending_Sector -O--CK 100 100 000 - 8
198 Offline_Uncorrectable ----CK 100 100 000 - 1
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 37
220 Disk_Shift -O---- 100 100 000 - 8258
222 Loaded_Hours -O--CK 038 038 000 - 24949
223 Load_Retry_Count -O--CK 100 100 000 - 0
224 Load_Friction -O---K 100 100 000 - 0
226 Load-in_Time -OS--K 100 100 000 - 346
240 Head_Flying_Hours P----- 100 100 001 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 72
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 72 [71] occurred at disk power-on lifetime: 47236 hours (1968 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 41 00 9a 00 00 14 89 c0 8f 64 00 Error: ICRC, ABRT at LBA = 0x1489c08f = 344572047
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 90 00 00 14 89 dc 90 40 00 00:19:19.458 READ FPDMA QUEUED
60 01 00 00 88 00 00 14 89 db 90 40 00 00:19:19.456 READ FPDMA QUEUED
60 01 00 00 80 00 00 14 89 da 90 40 00 00:19:19.455 READ FPDMA QUEUED
60 01 00 00 78 00 00 14 89 d9 90 40 00 00:19:19.454 READ FPDMA QUEUED
60 01 00 00 70 00 00 14 89 d8 90 40 00 00:19:19.452 READ FPDMA QUEUED
Error 71 [70] occurred at disk power-on lifetime: 46233 hours (1926 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 41 00 38 00 00 2f 56 08 7f 6f 00 Error: ICRC, ABRT at LBA = 0x2f56087f = 794167423
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 b0 00 50 00 00 2f 56 0a 80 40 00 1d+12:37:11.781 WRITE FPDMA QUEUED
61 01 00 00 48 00 00 2f 56 09 80 40 00 1d+12:37:11.781 WRITE FPDMA QUEUED
61 01 00 00 40 00 00 2f 56 08 80 40 00 1d+12:37:11.781 WRITE FPDMA QUEUED
61 01 00 00 38 00 00 2f 56 07 80 40 00 1d+12:37:11.781 WRITE FPDMA QUEUED
61 01 00 00 30 00 00 2f 56 06 80 40 00 1d+12:37:11.781 WRITE FPDMA QUEUED
Error 70 [69] occurred at disk power-on lifetime: 44044 hours (1835 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 41 00 52 00 00 02 8d 4b 97 62 00 Error: ICRC, ABRT at LBA = 0x028d4b97 = 42814359
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 50 00 00 02 8d 4a 98 40 00 03:52:16.109 READ FPDMA QUEUED
60 00 80 00 48 00 00 02 8d 4a 18 40 00 03:52:16.109 READ FPDMA QUEUED
60 00 80 00 40 00 00 02 8d 49 98 40 00 03:52:16.108 READ FPDMA QUEUED
60 01 00 00 38 00 00 02 8d 48 98 40 00 03:52:16.105 READ FPDMA QUEUED
60 01 00 00 30 00 00 02 8d 47 98 40 00 03:52:16.101 READ FPDMA QUEUED
Error 69 [68] occurred at disk power-on lifetime: 39741 hours (1655 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 01 00 00 22 b3 58 69 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x22b35869 = 582178921
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 7f 00 00 22 b3 57 eb e0 00 01:36:38.772 READ DMA EXT
25 00 00 00 7f 00 00 22 b3 57 6c e0 00 01:36:38.771 READ DMA EXT
25 00 00 00 7f 00 00 22 b3 56 ed e0 00 01:36:38.770 READ DMA EXT
25 00 00 00 7f 00 00 22 b3 56 6e e0 00 01:36:38.770 READ DMA EXT
25 00 00 00 7f 00 00 22 b3 55 ef e0 00 01:36:38.769 READ DMA EXT
Error 68 [67] occurred at disk power-on lifetime: 39702 hours (1654 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 41 00 0a 00 00 10 82 c9 8f 60 00 Error: ICRC, ABRT at LBA = 0x1082c98f = 277006735
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 08 00 00 10 82 c8 90 40 00 03:27:11.536 READ FPDMA QUEUED
60 01 00 00 f8 00 00 10 82 c7 90 40 00 03:27:11.531 READ FPDMA QUEUED
60 01 00 00 f0 00 00 10 82 c6 90 40 00 03:27:11.486 READ FPDMA QUEUED
60 01 00 00 e8 00 00 10 82 c5 90 40 00 03:27:11.470 READ FPDMA QUEUED
60 01 00 00 e0 00 00 10 82 c4 90 40 00 03:27:11.465 READ FPDMA QUEUED
Error 67 [66] occurred at disk power-on lifetime: 39701 hours (1654 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 41 00 1a 00 00 15 9f eb bf 65 00 Error: ICRC, ABRT at LBA = 0x159febbf = 362802111
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 18 00 00 15 9f ea c0 40 00 01:35:37.229 READ FPDMA QUEUED
60 01 00 00 10 00 00 15 9f e9 c0 40 00 01:35:37.222 READ FPDMA QUEUED
60 01 00 00 08 00 00 15 9f e8 c0 40 00 01:35:37.215 READ FPDMA QUEUED
60 01 00 00 f8 00 00 15 9f e7 c0 40 00 01:35:37.208 READ FPDMA QUEUED
60 01 00 00 f0 00 00 15 9f e6 c0 40 00 01:35:37.201 READ FPDMA QUEUED
Error 66 [65] occurred at disk power-on lifetime: 39640 hours (1651 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 41 00 10 00 00 2a ba e9 0f 6a 00 Error: ICRC, ABRT at LBA = 0x2abae90f = 716892431
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 01 00 00 38 00 00 2a ba ed 10 40 00 08:57:29.296 WRITE FPDMA QUEUED
61 01 00 00 30 00 00 2a ba ec 10 40 00 08:57:29.296 WRITE FPDMA QUEUED
61 01 00 00 28 00 00 2a ba eb 10 40 00 08:57:29.296 WRITE FPDMA QUEUED
61 01 00 00 20 00 00 2a ba ea 10 40 00 08:57:29.296 WRITE FPDMA QUEUED
61 01 00 00 18 00 00 2a ba e9 10 40 00 08:57:29.296 WRITE FPDMA QUEUED
Error 65 [64] occurred at disk power-on lifetime: 39640 hours (1651 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 41 00 12 00 00 38 aa b0 57 68 00 Error: ICRC, ABRT at LBA = 0x38aab057 = 950710359
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 80 00 00 38 aa bd 58 40 00 08:55:48.304 READ FPDMA QUEUED
60 01 00 00 78 00 00 38 aa bc 58 40 00 08:55:48.304 READ FPDMA QUEUED
60 01 00 00 70 00 00 38 aa bb 58 40 00 08:55:48.304 READ FPDMA QUEUED
60 01 00 00 68 00 00 38 aa ba 58 40 00 08:55:48.304 READ FPDMA QUEUED
60 01 00 00 60 00 00 38 aa b9 58 40 00 08:55:48.304 READ FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 51791 -
# 2 Extended offline Completed: read failure 00% 51788 560795080
# 3 Short offline Completed without error 00% 51554 -
# 4 Short offline Completed without error 00% 37919 -
# 5 Short offline Completed without error 00% 37895 -
# 6 Short offline Completed without error 00% 37799 -
# 7 Short offline Completed without error 00% 31767 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 1 (0x0001)
Device State: Active (0)
Current Temperature: 37 Celsius
Power Cycle Min/Max Temperature: 36/38 Celsius
Lifetime Min/Max Temperature: 21/73 Celsius
Under/Over Temperature Limit Count: 0/103903
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/55 Celsius
Min/Max Temperature Limit: 5/55 Celsius
Temperature History Size (Index): 478 (430)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0007 4 0 R_ERR response for host-to-device non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 5 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 5 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
View Git Blame Copy Permalink