mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
192 lines
9.1 KiB
Plaintext
192 lines
9.1 KiB
Plaintext
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p2 amd64] (local build)
|
|
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Model Family: Toshiba 2.5" HDD (30-60 GB)
|
|
Device Model: TOSHIBA MK6034GSX
|
|
Serial Number: --
|
|
Firmware Version: AH101M
|
|
User Capacity: 60,011,642,880 bytes [60.0 GB]
|
|
Sector Size: 512 bytes logical/physical
|
|
Device is: In smartctl database 7.3/5319
|
|
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
|
|
Local Time is: Thu Oct 6 01:09:11 2022 CEST
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
AAM feature is: Unavailable
|
|
APM level is: 128 (minimum power consumption without standby)
|
|
Rd look-ahead is: Enabled
|
|
Write cache is: Enabled
|
|
DSN feature is: Unavailable
|
|
ATA Security is: Disabled, frozen [SEC2]
|
|
Wt Cache Reorder: Unavailable
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART overall-health self-assessment test result: PASSED
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x00) Offline data collection activity
|
|
was never started.
|
|
Auto Offline Data Collection: Disabled.
|
|
Self-test execution status: ( 0) The previous self-test routine completed
|
|
without error or no self-test has ever
|
|
been run.
|
|
Total time to complete Offline
|
|
data collection: ( 219) seconds.
|
|
Offline data collection
|
|
capabilities: (0x5b) SMART execute Offline immediate.
|
|
Auto Offline data collection on/off support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
Offline surface scan supported.
|
|
Self-test supported.
|
|
No Conveyance Self-test supported.
|
|
Selective Self-test supported.
|
|
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
General Purpose Logging supported.
|
|
Short self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 43) minutes.
|
|
|
|
SMART Attributes Data Structure revision number: 16
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
|
|
2 Throughput_Performance P-S--- 100 100 050 - 0
|
|
3 Spin_Up_Time POS--K 100 100 001 - 1069
|
|
4 Start_Stop_Count -O--CK 100 100 000 - 4013
|
|
5 Reallocated_Sector_Ct PO--CK 100 100 050 - 1
|
|
7 Seek_Error_Rate PO-R-- 100 100 050 - 0
|
|
8 Seek_Time_Performance P-S--- 100 100 050 - 0
|
|
9 Power_On_Hours -O--CK 052 052 000 - 19379
|
|
10 Spin_Retry_Count PO--CK 180 100 030 - 0
|
|
12 Power_Cycle_Count -O--CK 100 100 000 - 3144
|
|
192 Power-Off_Retract_Count -O--CK 099 099 000 - 824
|
|
193 Load_Cycle_Count -O--CK 054 054 000 - 461788
|
|
194 Temperature_Celsius -O---K 100 100 000 - 41 (Min/Max 10/56)
|
|
196 Reallocated_Event_Count -O--CK 100 100 000 - 1
|
|
197 Current_Pending_Sector -O--CK 100 100 000 - 0
|
|
198 Offline_Uncorrectable ----CK 100 100 000 - 0
|
|
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 2
|
|
220 Disk_Shift -O---- 100 100 000 - 77
|
|
222 Loaded_Hours -O--CK 063 063 000 - 14866
|
|
223 Load_Retry_Count -O--CK 100 100 000 - 0
|
|
224 Load_Friction -O---K 100 100 000 - 0
|
|
226 Load-in_Time -OS--K 100 100 000 - 389
|
|
240 Head_Flying_Hours P----- 100 100 001 - 0
|
|
||||||_ K auto-keep
|
|
|||||__ C event count
|
|
||||___ R error rate
|
|
|||____ S speed/performance
|
|
||_____ O updated online
|
|
|______ P prefailure warning
|
|
|
|
General Purpose Log Directory Version 1
|
|
SMART Log Directory Version 1 [multi-sector log support]
|
|
Address Access R/W Size Description
|
|
0x00 GPL,SL R/O 1 Log Directory
|
|
0x01 SL R/O 1 Summary SMART error log
|
|
0x02 SL R/O 51 Comprehensive SMART error log
|
|
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
|
|
0x06 SL R/O 1 SMART self-test log
|
|
0x07 GPL R/O 1 Extended self-test log
|
|
0x09 SL R/W 1 Selective self-test log
|
|
0x10 GPL R/O 1 NCQ Command Error log
|
|
0x11 GPL R/O 1 SATA Phy Event Counters log
|
|
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|
|
|
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
|
Device Error Count: 2
|
|
CR = Command Register
|
|
FEATR = Features Register
|
|
COUNT = Count (was: Sector Count) Register
|
|
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
|
LH = LBA High (was: Cylinder High) Register ] LBA
|
|
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
|
LL = LBA Low (was: Sector Number) Register ]
|
|
DV = Device (was: Device/Head) Register
|
|
DC = Device Control Register
|
|
ER = Error register
|
|
ST = Status register
|
|
Powered_Up_Time is measured from power on, and printed as
|
|
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
|
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
|
|
|
Error 2 [1] occurred at disk power-on lifetime: 5570 hours (232 days + 2 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
|
-- -- -- == -- == == == -- -- -- -- --
|
|
84 -- 51 00 01 00 00 00 75 b8 31 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x0075b831 = 7714865
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
|
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
|
c8 00 00 00 0d 61 0b 9e 75 b6 2f e0 00 00:25:13.012 READ DMA
|
|
c8 00 00 00 08 75 9d 8e 61 0b 97 e0 00 00:25:13.007 READ DMA
|
|
c8 00 00 00 08 75 bd 0e 75 9d 87 e0 00 00:25:12.999 READ DMA
|
|
c8 00 00 00 08 74 fb ca 75 bd 07 e0 00 00:25:12.983 READ DMA
|
|
c8 00 00 00 1c dd b4 0a 74 fb af e0 00 00:25:12.983 READ DMA
|
|
|
|
Error 1 [0] occurred at disk power-on lifetime: 4359 hours (181 days + 15 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
|
-- -- -- == -- == == == -- -- -- -- --
|
|
84 -- 51 00 01 00 00 01 86 f2 ed e1 00 Error: ICRC, ABRT 1 sectors at LBA = 0x0186f2ed = 25621229
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
|
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
|
25 ff ff 00 34 00 00 01 86 f2 a3 e0 00 00:00:28.609 READ DMA EXT
|
|
25 ff ff 00 0c 00 00 01 86 f2 97 e0 00 00:00:28.608 READ DMA EXT
|
|
25 ff ff 00 33 00 00 01 86 f2 64 e0 00 00:00:28.608 READ DMA EXT
|
|
25 ff ff 00 0d 00 00 01 86 f2 57 e0 00 00:00:28.608 READ DMA EXT
|
|
25 ff ff 00 32 00 00 01 86 f2 25 e0 00 00:00:28.607 READ DMA EXT
|
|
|
|
SMART Extended Self-test Log Version: 1 (1 sectors)
|
|
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
|
|
|
SMART Selective self-test log data structure revision number 1
|
|
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|
1 0 0 Not_testing
|
|
2 0 0 Not_testing
|
|
3 0 0 Not_testing
|
|
4 0 0 Not_testing
|
|
5 0 0 Not_testing
|
|
Selective self-test flags (0x0):
|
|
After scanning selected spans, do NOT read-scan remainder of disk.
|
|
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|
|
|
SCT Commands not supported
|
|
|
|
Device Statistics (GP/SMART Log 0x04) not supported
|
|
|
|
Pending Defects log (GP Log 0x0c) not supported
|
|
|
|
SATA Phy Event Counters (GP Log 0x11)
|
|
ID Size Value Description
|
|
0x0001 4 0 Command failed due to ICRC error
|
|
0x0002 4 0 R_ERR response for data FIS
|
|
0x0003 4 0 R_ERR response for device-to-host data FIS
|
|
0x0004 4 0 R_ERR response for host-to-device data FIS
|
|
0x0005 4 0 R_ERR response for non-data FIS
|
|
0x0006 4 0 R_ERR response for device-to-host non-data FIS
|
|
0x0007 4 0 R_ERR response for host-to-device non-data FIS
|
|
0x0008 4 0 Device-to-host non-data FIS retries
|
|
0x0009 4 1 Transition from drive PhyRdy to drive PhyNRdy
|
|
0x000a 4 6 Device-to-host register FISes sent due to a COMRESET
|
|
0x000b 4 0 CRC errors within host-to-device FIS
|
|
0x000d 4 0 Non-CRC errors within host-to-device FIS
|
|
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
|
|
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
|
|
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
|
|
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
|
|