80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Toshiba/MK6475/MK6475GSX/1FD4F0F2969D
Andrey Ponomarenko a41331e270 Update of reports (new: 14, modified: 3797)
2023-02-14 02:15:20 +03:00

328 lines
17 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-BETA2 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MK..75GSX
Device Model: TOSHIBA MK6475GSX
Serial Number: --
LU WWN Device Id: 5 000039 ...
Firmware Version: GT001A
User Capacity: 640,135,028,736 bytes [640 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Tue Feb 16 06:31:16 2021 WIB
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 192) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
2 Throughput_Performance P-S--- 100 100 050 - 0
3 Spin_Up_Time POS--K 100 100 001 - 1426
4 Start_Stop_Count -O--CK 100 100 000 - 4847
5 Reallocated_Sector_Ct PO--CK 100 100 050 - 64
7 Seek_Error_Rate PO-R-- 100 100 050 - 0
8 Seek_Time_Performance P-S--- 100 100 050 - 0
9 Power_On_Hours -O--CK 001 001 000 - 56204
10 Spin_Retry_Count PO--CK 196 100 030 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 4613
191 G-Sense_Error_Rate -O--CK 100 100 000 - 38322
192 Power-Off_Retract_Count -O--CK 099 099 000 - 663
193 Load_Cycle_Count -O--CK 006 006 000 - 949154
194 Temperature_Celsius -O---K 100 100 000 - 44 (Min/Max 21/60)
196 Reallocated_Event_Count -O--CK 100 100 000 - 8
197 Current_Pending_Sector -O--CK 100 100 000 - 8
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 1
220 Disk_Shift -O---- 100 100 000 - 36
222 Loaded_Hours -O--CK 001 001 000 - 43266
223 Load_Retry_Count -O--CK 100 100 000 - 0
224 Load_Friction -O---K 100 100 000 - 0
226 Load-in_Time -OS--K 100 100 000 - 330
240 Head_Flying_Hours P----- 100 100 001 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 43020 (device log contains only the most recent 256 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 43020 [11] occurred at disk power-on lifetime: 55986 hours (2332 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 12 00 00 01 f1 8c 88 61 00 Error: UNC at LBA = 0x01f18c88 = 32607368
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 10 00 00 01 f1 8b f0 40 00 00:12:24.584 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 00 00 00:12:24.583 READ LOG EXT
60 01 00 00 00 00 00 01 f1 8b f0 40 00 00:12:20.462 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 00 00 00:12:20.461 READ LOG EXT
60 01 00 00 f0 00 00 01 f1 8b f0 40 00 00:12:14.451 READ FPDMA QUEUED
Error 43019 [10] occurred at disk power-on lifetime: 55986 hours (2332 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 02 00 00 01 f1 8c 88 61 00 Error: UNC at LBA = 0x01f18c88 = 32607368
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 00 00 00 01 f1 8b f0 40 00 00:12:20.462 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 00 00 00:12:20.461 READ LOG EXT
60 01 00 00 f0 00 00 01 f1 8b f0 40 00 00:12:14.451 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 00 00 00:12:14.450 READ LOG EXT
61 00 08 00 e0 00 00 03 c3 99 80 40 00 00:12:10.284 WRITE FPDMA QUEUED
Error 43018 [9] occurred at disk power-on lifetime: 55986 hours (2332 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 f2 00 00 01 f1 8c 88 61 00 Error: UNC at LBA = 0x01f18c88 = 32607368
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 f0 00 00 01 f1 8b f0 40 00 00:12:14.451 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 00 00 00:12:14.450 READ LOG EXT
61 00 08 00 e0 00 00 03 c3 99 80 40 00 00:12:10.284 WRITE FPDMA QUEUED
61 00 10 00 d8 00 00 02 41 82 f8 40 00 00:12:10.284 WRITE FPDMA QUEUED
61 00 08 00 d0 00 00 02 41 83 90 40 00 00:12:10.284 WRITE FPDMA QUEUED
Error 43017 [8] occurred at disk power-on lifetime: 55986 hours (2332 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 8a 00 00 01 f1 8c 88 61 00 Error: WP at LBA = 0x01f18c88 = 32607368
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 e0 00 00 03 c3 99 80 40 00 00:12:10.284 WRITE FPDMA QUEUED
61 00 10 00 d8 00 00 02 41 82 f8 40 00 00:12:10.284 WRITE FPDMA QUEUED
61 00 08 00 d0 00 00 02 41 83 90 40 00 00:12:10.284 WRITE FPDMA QUEUED
60 01 00 00 c8 00 00 01 f1 ad f0 40 00 00:12:10.284 READ FPDMA QUEUED
60 01 00 00 c0 00 00 01 f1 ac f0 40 00 00:12:10.284 READ FPDMA QUEUED
Error 43016 [7] occurred at disk power-on lifetime: 55986 hours (2332 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 a2 00 00 01 f1 8c 88 61 00 Error: WP at LBA = 0x01f18c88 = 32607368
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 e8 00 00 02 41 83 90 40 00 00:12:04.658 WRITE FPDMA QUEUED
60 01 00 00 e0 00 00 01 f1 ad f0 40 00 00:12:04.658 READ FPDMA QUEUED
60 01 00 00 d8 00 00 01 f1 ac f0 40 00 00:12:04.658 READ FPDMA QUEUED
60 01 00 00 d0 00 00 01 f1 ab f0 40 00 00:12:04.658 READ FPDMA QUEUED
60 01 00 00 c8 00 00 01 f1 aa f0 40 00 00:12:04.658 READ FPDMA QUEUED
Error 43015 [6] occurred at disk power-on lifetime: 55986 hours (2332 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 e2 00 00 01 f1 8c 88 61 00 Error: WP at LBA = 0x01f18c88 = 32607368
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 48 00 00 02 41 6b d0 40 00 00:11:53.895 WRITE FPDMA QUEUED
60 01 00 00 40 00 00 01 f1 95 f0 40 00 00:11:53.895 READ FPDMA QUEUED
60 01 00 00 38 00 00 01 f1 94 f0 40 00 00:11:53.895 READ FPDMA QUEUED
60 01 00 00 30 00 00 01 f1 93 f0 40 00 00:11:53.895 READ FPDMA QUEUED
60 01 00 00 28 00 00 01 f1 92 f0 40 00 00:11:53.895 READ FPDMA QUEUED
Error 43014 [5] occurred at disk power-on lifetime: 55986 hours (2332 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 6a 00 00 01 f1 8c 88 61 00 Error: WP at LBA = 0x01f18c88 = 32607368
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 d0 00 00 02 41 6b d0 40 00 00:11:49.028 WRITE FPDMA QUEUED
60 01 00 00 c8 00 00 01 f1 95 f0 40 00 00:11:49.028 READ FPDMA QUEUED
60 01 00 00 c0 00 00 01 f1 94 f0 40 00 00:11:49.028 READ FPDMA QUEUED
60 01 00 00 b8 00 00 01 f1 93 f0 40 00 00:11:49.028 READ FPDMA QUEUED
60 01 00 00 b0 00 00 01 f1 92 f0 40 00 00:11:49.028 READ FPDMA QUEUED
Error 43013 [4] occurred at disk power-on lifetime: 55986 hours (2332 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 f2 00 00 01 f1 8c 88 61 00 Error: WP at LBA = 0x01f18c88 = 32607368
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 58 00 00 02 41 6b d0 40 00 00:11:44.372 WRITE FPDMA QUEUED
60 01 00 00 50 00 00 01 f1 95 f0 40 00 00:11:44.372 READ FPDMA QUEUED
60 01 00 00 48 00 00 01 f1 94 f0 40 00 00:11:44.372 READ FPDMA QUEUED
60 01 00 00 40 00 00 01 f1 93 f0 40 00 00:11:44.372 READ FPDMA QUEUED
60 01 00 00 38 00 00 01 f1 92 f0 40 00 00:11:44.372 READ FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 55603 -
# 2 Short offline Completed without error 00% 55592 -
# 3 Short offline Completed without error 00% 55297 -
# 4 Short offline Completed without error 00% 55293 -
# 5 Short offline Completed without error 00% 55287 -
# 6 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 1 (0x0001)
Device State: Active (0)
Current Temperature: 44 Celsius
Power Cycle Min/Max Temperature: 41/50 Celsius
Lifetime Min/Max Temperature: 21/60 Celsius
Under/Over Temperature Limit Count: 0/85
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/55 Celsius
Min/Max Temperature Limit: 5/55 Celsius
Temperature History Size (Index): 478 (156)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0007 4 0 R_ERR response for host-to-device non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 5 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 5 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
View Git Blame Copy Permalink