80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Toshiba/MK7575/MK7575GSX/8938C7C4843C
Andrey Ponomarenko 51569f7bd1 Update of reports (new: 1098, modified: 0)
2020-11-03 14:43:05 +03:00

327 lines
17 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MK..75GSX
Device Model: TOSHIBA MK7575GSX
Serial Number: --
LU WWN Device Id: 5 000039 ...
Firmware Version: GT001C
User Capacity: 750,156,374,016 bytes [750 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sat Aug 29 16:15:00 2020 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x05) Offline data collection activity
was aborted by an interrupting command from host.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 248) Self-test routine in progress...
80% of test remaining.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x51) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 179) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0
2 Throughput_Performance POS--K 100 100 050 - 0
3 Spin_Up_Time PO---K 100 100 002 - 1996
4 Start_Stop_Count -O--CK 100 100 000 - 9464
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
7 Seek_Error_Rate POSR-K 100 100 050 - 0
8 Seek_Time_Performance P-S--K 100 100 050 - 0
9 Power_On_Hours -O--CK 064 064 000 - 14517
10 Spin_Retry_Count PO--CK 253 100 030 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 9224
183 Runtime_Bad_Block -O--CK 100 100 001 - 127
184 End-to-End_Error PO--CK 100 100 097 - 0
185 Unknown_Attribute -O--CK 100 100 001 - 65535
187 Reported_Uncorrect -O--CK 095 095 000 - 5
188 Command_Timeout -O--CK 100 088 000 - 71
189 High_Fly_Writes -O-RCK 100 100 001 - 0
190 Airflow_Temperature_Cel -O---K 055 043 040 - 45 (Min/Max 30/45)
191 G-Sense_Error_Rate -O--CK 100 100 000 - 1676
192 Power-Off_Retract_Count -O---K 100 100 000 - 6357089
193 Load_Cycle_Count -O--CK 096 096 000 - 46450
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O--CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 9
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 9 [8] occurred at disk power-on lifetime: 14399 hours (599 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 2a 00 00 04 f8 ae 48 64 00 Error: UNC at LBA = 0x04f8ae48 = 83406408
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 28 00 00 04 f8 ad 58 40 00 00:02:53.881 READ FPDMA QUEUED
60 00 08 00 20 00 00 04 cc ef f0 40 00 00:02:53.863 READ FPDMA QUEUED
60 00 08 00 18 00 00 04 d9 d9 78 40 00 00:02:53.856 READ FPDMA QUEUED
60 00 78 00 10 00 00 05 09 52 28 40 00 00:02:53.856 READ FPDMA QUEUED
60 00 08 00 08 00 00 04 ed 18 d8 40 00 00:02:53.847 READ FPDMA QUEUED
Error 8 [7] occurred at disk power-on lifetime: 14399 hours (599 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 92 00 00 04 f8 ae 48 64 00 Error: UNC at LBA = 0x04f8ae48 = 83406408
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 d8 00 00 04 ed 18 d8 40 00 00:02:49.682 READ FPDMA QUEUED
61 00 08 00 d0 00 00 00 66 7a c0 40 00 00:02:49.682 WRITE FPDMA QUEUED
60 00 78 00 c8 00 00 05 09 52 28 40 00 00:02:49.677 READ FPDMA QUEUED
60 00 08 00 c0 00 00 04 cc ef f0 40 00 00:02:49.673 READ FPDMA QUEUED
61 00 08 00 b8 00 00 04 1d 84 00 40 00 00:02:49.672 WRITE FPDMA QUEUED
Error 7 [6] occurred at disk power-on lifetime: 14399 hours (599 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 f2 00 00 04 f8 ae 48 64 00 Error: UNC at LBA = 0x04f8ae48 = 83406408
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 10 00 00 04 f8 af 58 40 00 00:02:41.576 READ FPDMA QUEUED
60 01 00 00 08 00 00 04 f8 ae 58 40 00 00:02:41.575 READ FPDMA QUEUED
60 01 00 00 f8 00 00 00 ff 53 30 40 00 00:02:41.574 READ FPDMA QUEUED
60 01 00 00 f0 00 00 04 f8 ad 58 40 00 00:02:41.574 READ FPDMA QUEUED
60 00 80 00 e8 00 00 00 ff 52 b0 40 00 00:02:41.573 READ FPDMA QUEUED
Error 6 [5] occurred at disk power-on lifetime: 14399 hours (599 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 b2 00 00 04 f8 ae 48 64 00 Error: UNC at LBA = 0x04f8ae48 = 83406408
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 b0 00 00 04 f8 ad 58 40 00 00:02:37.179 READ FPDMA QUEUED
60 01 00 00 a8 00 00 04 f8 ae 58 40 00 00:02:37.179 READ FPDMA QUEUED
60 01 00 00 a0 00 00 04 f8 af 58 40 00 00:02:37.179 READ FPDMA QUEUED
60 00 90 00 98 00 00 04 f8 b0 58 40 00 00:02:37.179 READ FPDMA QUEUED
61 00 08 00 90 00 00 00 63 f8 88 40 00 00:02:37.179 WRITE FPDMA QUEUED
Error 5 [4] occurred at disk power-on lifetime: 14399 hours (599 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 62 00 00 04 f8 ae 48 64 00 Error: UNC at LBA = 0x04f8ae48 = 83406408
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 40 00 88 00 00 03 1e 3d 00 40 00 00:02:32.913 READ FPDMA QUEUED
60 00 40 00 80 00 00 03 1e 3c c0 40 00 00:02:32.912 READ FPDMA QUEUED
60 00 90 00 78 00 00 04 f8 b0 58 40 00 00:02:32.912 READ FPDMA QUEUED
60 01 00 00 70 00 00 04 f8 af 58 40 00 00:02:32.912 READ FPDMA QUEUED
60 01 00 00 68 00 00 04 f8 ae 58 40 00 00:02:32.912 READ FPDMA QUEUED
Error 4 [3] occurred at disk power-on lifetime: 13528 hours (563 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 01 00 00 05 cd 1e 67 40 00 Error: ICRC, ABRT 1 sectors at LBA = 0x05cd1e67 = 97328743
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 80 00 00 05 cd 1d e8 40 00 00:02:05.244 WRITE DMA EXT
35 00 00 00 80 00 00 05 cd 1d 68 40 00 00:02:05.241 WRITE DMA EXT
35 00 00 00 80 00 00 05 cd 1c e8 40 00 00:02:05.237 WRITE DMA EXT
35 00 00 00 80 00 00 05 cd 1c 68 40 00 00:02:05.234 WRITE DMA EXT
35 00 00 00 80 00 00 05 cd 1b e8 40 00 00:02:05.230 WRITE DMA EXT
Error 3 [2] occurred at disk power-on lifetime: 8326 hours (346 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 01 00 00 21 f1 cb 4f 40 00 Error: ICRC, ABRT 1 sectors at LBA = 0x21f1cb4f = 569494351
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 08 00 00 21 f1 cb 48 40 00 00:00:17.441 WRITE DMA EXT
35 00 00 00 08 00 00 21 f1 cb 40 40 00 00:00:17.441 WRITE DMA EXT
35 00 00 00 10 00 00 21 f1 cb 30 40 00 00:00:17.441 WRITE DMA EXT
35 00 00 00 08 00 00 21 f1 cb 28 40 00 00:00:17.441 WRITE DMA EXT
35 00 00 00 08 00 00 21 f1 cb 20 40 00 00:00:17.441 WRITE DMA EXT
Error 2 [1] occurred at disk power-on lifetime: 2765 hours (115 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 01 00 00 10 7b 56 5f 40 00 Error: ICRC, ABRT 1 sectors at LBA = 0x107b565f = 276518495
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 80 00 00 10 7b 55 e0 40 00 00:01:27.167 WRITE DMA EXT
35 00 00 00 80 00 00 10 7b 55 60 40 00 00:01:27.166 WRITE DMA EXT
35 00 00 00 80 00 00 10 7b 54 e0 40 00 00:01:27.166 WRITE DMA EXT
35 00 00 00 80 00 00 10 7b 54 60 40 00 00:01:27.165 WRITE DMA EXT
35 00 00 00 80 00 00 10 7b 53 e0 40 00 00:01:27.165 WRITE DMA EXT
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 14427 -
# 2 Short offline Aborted by host 90% 14427 -
# 3 Short offline Aborted by host 90% 14384 -
# 4 Short offline Completed without error 00% 14334 -
# 5 Short offline Aborted by host 90% 14333 -
# 6 Short offline Aborted by host 90% 14333 -
# 7 Short offline Completed without error 00% 13996 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 1 (0x0001)
Device State: DST executing in background (3)
Current Temperature: 44 Celsius
Power Cycle Min/Max Temperature: 30/45 Celsius
Lifetime Min/Max Temperature: 2/57 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: 0/60 Celsius
Temperature History Size (Index): 478 (75)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0007 4 0 R_ERR response for host-to-device non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 12 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 24 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
View Git Blame Copy Permalink