mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
83 lines
4.2 KiB
Plaintext
83 lines
4.2 KiB
Plaintext
smartctl 7.1 2019-12-30 r5022 [i386-unknown-openbsd6.8] (local build)
|
|
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Model Family: Toshiba 2.5" HDD (80 GB and above)
|
|
Device Model: TOSHIBA MK8025GAS
|
|
Serial Number: --
|
|
Firmware Version: KA024A
|
|
User Capacity: 80,026,361,856 bytes [80.0 GB]
|
|
Sector Size: 512 bytes logical/physical
|
|
Device is: In smartctl database [for details use: -P show]
|
|
ATA Version is: ATA/ATAPI-6 (minor revision not indicated)
|
|
Local Time is: Mon Feb 1 03:58:20 2021 CET
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART overall-health self-assessment test result: PASSED
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x00) Offline data collection activity
|
|
was never started.
|
|
Auto Offline Data Collection: Disabled.
|
|
Self-test execution status: ( 0) The previous self-test routine completed
|
|
without error or no self-test has ever
|
|
been run.
|
|
Total time to complete Offline
|
|
data collection: ( 375) seconds.
|
|
Offline data collection
|
|
capabilities: (0x1b) SMART execute Offline immediate.
|
|
Auto Offline data collection on/off support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
Offline surface scan supported.
|
|
Self-test supported.
|
|
No Conveyance Self-test supported.
|
|
No Selective Self-test supported.
|
|
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
No General Purpose Logging support.
|
|
Short self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 75) minutes.
|
|
|
|
SMART Attributes Data Structure revision number: 16
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
|
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
|
|
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
|
|
3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1098
|
|
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 219
|
|
5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 0
|
|
7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
|
|
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
|
|
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 138
|
|
10 Spin_Retry_Count 0x0033 104 100 030 Pre-fail Always - 0
|
|
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 105
|
|
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 14
|
|
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 2549
|
|
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 29 (Min/Max 8/40)
|
|
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
|
|
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
|
|
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
|
|
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
|
|
220 Disk_Shift 0x0002 100 100 000 Old_age Always - 47
|
|
222 Loaded_Hours 0x0032 100 100 000 Old_age Always - 121
|
|
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
|
|
224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
|
|
226 Load-in_Time 0x0026 100 100 000 Old_age Always - 211
|
|
240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
|
|
|
|
SMART Error Log Version: 1
|
|
No Errors Logged
|
|
|
|
SMART Self-test log structure revision number 1
|
|
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
|
|
|
Selective Self-tests/Logging not supported
|
|
|